DOI QR코드

DOI QR Code

Methodology to Determine Sign for the Most Conservative 3-D Nozzle Loads

3차원 노즐로드 보수적 하중 조건 결정을 위한 하중 부호 결정 방법론

  • 유경찬 (고려대학교 기계공학부) ;
  • 서기완 (고려대학교 기계공학부) ;
  • 송현석 (고려대학교 기계공학부) ;
  • 김윤재 (고려대학교 기계공학부)
  • Received : 2023.11.16
  • Accepted : 2023.12.22
  • Published : 2023.12.30

Abstract

When performing stress analysis for a nozzle in nuclear power plants, the nozzle loads should be determined conservatively. Existing stress analysis report of 3-D nozzle loads in nuclear power plants often provide only load magnitude not the sign (direction). Since calculated stress distribution depends on load direction, determining critical load directions for conservative stress analysis is crucial. In this study, an efficient method for determining critical load directions in nozzle loads is proposed. In the proposed method, stresses are firstly calculated using elastic finite element (FE) analysis for the uni-axial load in each direction. Then stress distributions for the multi-axial loads are analytically calculated using the principle of superposition. The calculated stress values are verified by comparing with FE analysis results under multi-axial loading. By using this method, the complex task of determining conservative load directions can be simplified.

Keywords

References

  1. KEPIC MNG, 2004, "Core Support Structure," Korea Electric Association, Seoul.
  2. Kweon, H. D., Lee, Y. J., Kim, D. H., and Lee, D. H., 2019, "Evaluation of Fracture Toughness considering Constraint Effect of Reactor Pressure Vessel Nozzle," Trans of the KPVP, Vol. 15, No. 1, pp.71-76. doi:https://doi.org/10.20466/KPVP.2019.15.1.071
  3. Botsis, C., Anagnostides, G., and Kokavesis, N., 2004, "A Proposed Method for Anticipated-Allowable Piping, Mechanical and Seismic Nozzle Load Design," Proc. of ASME 2004 PVP Conference, San Diego, California, July 25-29, PVP2004-2945
  4. Yoon, H. S., Kim, J. M., Maeng, C. S., Kim, H. M., and Lee, D. H., 2015, "Two and Three-Dimensional Analysis Comparison of Nozzles due to Internal Pressure, Thermal Load and External Load," J. Comput. Struct. Eng. Inst. Korea, Vol. 28, No. 3, pp.283-291. doi:https://doi.org/10.7734/coseik.2015.28.3.283
  5. Park, C., Lee, B. C., Ryu, J. S., and Kim, Y. K., 2015, "Overall design features and key technology development for KJRR," Proc. of KNS 2015 Nucl. Soc. Fall Meeting, Gyeongju, Korea, October 29-30, pp. 305-353.
  6. ANSYS Version 2020, 2020, TSNE.
  7. ASME BPVC Sec.II, 2004, "Materials," American Society of Mechanical Engineers, NY.
  8. MATLAB Version 2022, 2022, MathWorks.