과제정보
이 논문은 2019년도 정부(과학기술정보통신부)의 재원으로 한국연구재단 원자력기초연구지원사업의 지원을 받아 수행된 연구임(No. 1711097219)
참고문헌
- Waste Comprehensive Information Database, WACID, http://wacid.kins.re.kr.
- Korea Radioactive Waste Agency, www.korad.or.kr.
- B. D. Hanson, 2019, "Gap Analysis to Support Extended Storage and Transportation of Spent Nuclear Fuel: Five-Year Delta Report", US Department of Energy Spent Fuel and Waste Science and Technology
- D.G. Enos and C.R. Bryan, 2016, "Final Report: Characterization of Canister Mockup Weld Residual Stresses", U.S. Department of Energy, Sandia National Laboratories, SAND2016-12375R.
- B. Sutton, K. Ross, G. Grant, G. Cannell, G. Frederick and R. Couch, "Friction stir processing of degraded austenitic stainless steel nuclear fuel dry cask storage system canisters", Miner. Met. Mater. Soc., pp. 343-351.
- K. Ross, B. Sutton, G. Grant, G. Cannell, G. Frederick and R. Couch, 2017, "Development of friction stir processing for repair of nuclear dry cask storage system canisters", Miner. Met. Mater. Soc., pp. 39-46.
- N. Klymyshyn, N. Karri, H. Adkins and B. Hanson, 2013, "Structural Sensitivity of Dry Storage Canisters, U.S. Department of Energy", Pacific Northwest National Laboratory, PNNL22814.
- Y. Sano, M. Obata, T. Kubo, N. Mukai, M. Yoda, K. Masaki and Y. Ochi, 2006, "Retardation of crack initiation and growth in austenitic stainless steels by laser peening without protective coating", Mater. Sci. Eng. Vol. 417, No. 1-2, pp. 334-340. https://doi.org/10.1016/j.msea.2005.11.017
- P. Peyre, X. Scherpereel, L. Berthe, C. Carboni, R. Fabbro and G. Be, 2000, "Surface modifications induced in 316L steel by laser peening and shot-peening . Influence on pitting corrosion resistance", Mater. Sci. Eng., Vol. 280, pp. 294-302. https://doi.org/10.1016/S0921-5093(99)00698-X
- J.Z. Lu, K.Y. Luo, D.K. Yang, X.N. Cheng, J.L. Hu, F.Z. Dai, H. Qi, L. Zhang, J.S. Zhong, Q.W. Wang and Y.K. Zhang, 2012, "Effects of laser peening on stress corrosion cracking (SCC) of ANSI 304 austenitic stainless steel", Corrosion Sci., Vol. 60, pp. 145-152. https://doi.org/10.1016/j.corsci.2012.03.044
- S. Yin, P. Cavaliere, B. Aldwell, R. Jenkins, H. Liao, W. Li and R. Lupoi, 2018, "Cold spray additive manufacturing and repair: fundamentals and applications", Addit. Manuf., Vol. 21, pp. 628-650. https://doi.org/10.1016/j.addma.2018.04.017
- A. Moridi, S.M. Hassani-Gangaraj, M. Guagliano and M. Dao, 2014, "Cold spray coating: review of material systems and future perspectives", Surf. Eng., Vol. 30, pp. 369-395. https://doi.org/10.1179/1743294414Y.0000000270
- J. Renshaw, 2019, "Presentation: dry storage canister inspection, mitigation, and repair R&D efforts", NRC REC CON Meet., Electric Power Research Institute.
- H.T. Wang, H.L. Yao, X.B. Bai, Q.Y. Chen, G.C. Ji and B. Jodoin, 2019, "Surface grain refinement of AZ91D magnesium alloy by cold spraying shot peening process", Surf. Coating. Technol., Vol. 374, pp. 795-801. https://doi.org/10.31399/asm.cp.itsc2019p0795
- J. Hirschbeck, 2013, "Kinetics Spray Solutions GmbH 2013".
- ASTM C633-13, 2017, "Standard Test Method for Adhesion or Cohesion Strength of Thermal Spray Coatings", ASTM International,
- L.N. Brewer, J.F. Schiel, E.S.K. Menon and D.J. Woo, 2018, "The connections between powder variability and coating microstructures for cold spray deposition of austenitic stainless steel", Surf. Coating. Technol., Vol. 334, pp. 50-60. https://doi.org/10.1016/j.surfcoat.2017.10.082
- M. Villa, S. Dosta and J.M. Guilemany, 2013, "Optimization of 316L stainless steel coatings on light alloys using Cold Gas Spray", Surf. Coating. Technol. Vol. 235, pp. 220-225. https://doi.org/10.1016/j.surfcoat.2013.07.036
- B. Dikici, H. Yilmazer, I. Ozdemir and M. Isik, 2016, "The effect of post-heat treatment on microstructure of 316L cold-sprayed coatings and their corrosion performance", J. Therm. Spray Technol., Vol. 25, pp. 704-714. https://doi.org/10.1007/s11666-016-0402-z
- X. Jiang, N. Overman, C. Smith and K. Ross, 2020, "Microstructure, hardness and cavitation erosion resistance of different cold spray coatings on stainless steel 316 for hydropower application", Mater. Today Commun., Vol. 25, pp. 1-9. https://doi.org/10.1016/j.mtcomm.2020.101305
- H. Yeom, T. Dabney, N. Pocquette, K. Ross, F. E. Pferkorn and K. Sridharan, 2020, "Cold spray deposition of 304L stainless steel to mitigate chloride-induced stress corrosion cracking in canisters for used nuclear fuel storage", J. Nucl. Mater., Vol. 538., pp. 1-12. https://doi.org/10.1016/j.jnucmat.2020.152254