DOI QR코드

DOI QR Code

Development of Impact-sliding wear model for Steam Generator Tubes

증기발생기 전열관 충격 미끄럼 마모 모델 개발

  • Received : 2023.09.25
  • Accepted : 2023.12.12
  • Published : 2023.12.30

Abstract

The phenomenon of fretting wear due to the flow-induced vibration in steam generator (SG) tube is a significant degradation mechanism in nuclear power plants. Fretting wear in SG tube is primarily attributed to the friction and impact forces between the SG tube and the tube support structures, experienced during nuclear power plants operation. While the Archard model has generally been used for the prediction of fretting wear in SG tube, it is limited by its linear nature. In this study, we introduced an "Impact Shear Work-rate" (ISW) model, which takes into account the combined effects of impact and sliding. The ISW model was evaluated using existing experimental data on fretting wear in SG tube and was compared against the Archard model. The prediction results using the ISW model were more accurate than those using the Archard model, particularly for impact forces.

Keywords

Acknowledgement

본 연구는 산업통상자원부(MOTIE)와 한국에너지기술평가원(KETEP)의 지원을 받아 수행한 연구 과제입니다(No. 20224B10100030).

References

  1. Fisher, N. J., Chow, A. B. and Weckwerth, M. K., 1995, "Experimental Fretting-Wear Studies of Steam Generator Materials," J. Press. Vess-T. ASME, Vol. 117, No. 4, pp. 312-320. doi:https://doi.org/10.1115/1.2842129 
  2. Amanov, A. and Umarov, R., 2018, "The effects of ultrasonic nanocrystal surface modification temperature on the mechanical properties and fretting wear resistance of Inconel 690 alloy," Appl. Surf. Sci., Vol. 441, pp. 515-529. doi:https://doi.org/10.1016/j.apsusc.2018.01.293 
  3. Cai, Z., Li, Z., Yin, M., Zhu, M. and Zhou, Z., 2020, "A review of fretting study on nuclear power equipment," Tribol. Int., Vol. 144, 106095. doi:https://doi.org/10.1016/j.triboint.2019.106095 
  4. Kim, H. D., 2010, "Burst Behavior of Wear Scar of Steam Generators Tubes," Trans. of the KPVP, Vol. 6, No. 2, pp. 1-8. 
  5. Lee, K. H., Kim, H. N. and Kang, Y. S., 2015, "Burst Pressure for Steam Generator Tubes with Inclined Wear Degradation," Proc. of KPVP Conference, Gimcheon, Nov. 19-20. 
  6. Archard, J. F., "Contact and Rubbing of Flat Surfaces," 1953, J. Appl. Phys., Vol. 24, No. 8, pp. 981-988. doi:https://doi.org/10.1063/1.1721448 
  7. Frick, T. M., Sogeck, T. E. and Reavis, J. R., 1984, "Overview on the development and implementation of methodologies to compute vibration and wear of steam generator tubes," Symposium on Flow-Induced Vibrations, New Orleans, Dec. 9-14, pp. 149-161. 
  8. Fricke, R. W. and Allen, C., 1993, "Repetitive impact wear of steels," Wear, Vol. 162-164, pp. 837-847. doi:https://doi.org/10.1016/0043-1648(93)90085-Z 
  9. Rabinowicz, E. and Tanner, R. I., 1966, "Friction and wear of materials," J. Appl. Mech-T. ASME, Vol. 33, No. 2, pp. 479. 
  10. Engel, P. A., Lyons, T. H. and Sirico, J. L., 1973, "Impact wear model for steel specimens," Wear, Vol. 23, No. 2, pp. 185-201. doi:https://doi.org/10.1016/0043-1648(73)90083-5 
  11. Guo, K., Tian, C., Wang, Y., Wang, Y. and Tan, W., 2020, "An energy-based model for impact-sliding fretting wear between tubes and anti-vibration bars in steam generators," Tribol. Int., Vol. 148, 106305. doi:https://doi.org/10.1016/j.triboint.2020.106305 
  12. Lewis, R., 2007, "A modelling technique for predicting compound impact wear," Wear, Vol. 262, No. 11-12, pp. 1516-1521. doi:https://doi.org/10.1016/j.wear.2007.01.032 
  13. Zalzalah, M., Lewis, R. and Slatter, T., 2021, "A new predictive model for normal and compound impact wear," Wear, Vol. 480-481, 203954. doi:https://doi.org/j.wear.2021.203954 
  14. Feldman, H., 2008, "Steam Generator Management Program: PWR Steam Generator Tube Wear-Alloy 690/Foreign Objects, Alloy 600/Carbon Steel, Alloy 690/Carbon Steel" Electric Power Research Institute, Palo Alto, 1016563. 
  15. Lee, Y. H., Kim, I. S. and Park, Y. S., 2001, "A study on the formation of plastic deformation layer in the steam generator tube materials during fretting wear," Proc. of KNS Spring Meeting, Jeju, May 24-25. 
  16. Lee, K. H. and Kim, H. N., 2015, "Relationships between Depth and Volume for Various Wear Shapes," Proc. of KSME Material and Fracture Division Conference, Jeju, April 2-3, pp. 328-329. 
  17. Lee, K. H., Kang, Y. S. and Kim, H. D., 2019, "Methods for Determining Burst Pressure for Steam Generator Tubes with Wear Degradation," Trans. of the KSME(A), Vol. 43, No. 1, pp. 57-66. doi:https://doi.org/10.3795/KSME-A.2019.43.1.057 
  18. Ko, P. L., 1985, "The significance of shear and normal force components on tube wear due to fretting and periodic impacting," Wear, Vol. 106, No. 1-3, pp. 261-281. doi:https://doi.org/10.1016/0043-1648(85)90112-7 
  19. Aldham, D., Warburton, J. and Pendlebury, R. E., 1985, "The unlubricated fretting wear of mild steel in air," Wear, Vol. 106, No. 1-3, pp. 177-201. doi:https://doi.org/10.1016/0043-1648(85)90109-7 
  20. Van Rossum, G. and Drake, F. L., 2009, Python 3 Reference Manual, CreateSpace, Scotts Valley. 
  21. Kingma, D. P. and Ba, J., 2014, "Adam: A Method for Stochastic Optimization," arXiv preprint arXiv:1412.6980. 
  22. Yau, L. and Ben-Israel, A., 1998, "The Newton and Halley Methods for Complex Roots," Am. Math. Mon., Vol. 105, No. 9, pp. 806-818. doi:https://doi.org/10.1080/00029890.1998.12004968