Journal of Sensor Science and Technology (센서학회지)

The Korean Sensors Society (한국센서학회)
권호 표지
DOI QR코드

DOI QR Code

Design and Implementation of a Multi-purpose Test Equipment with a Large Utilization Range for use in Electric Fire

전기화재 분야에서 다목적으로 시험장치의 활용범위를 증가시키기 위한 시험장치의 설계 및 구현

  • Dongcheol Shin (Dept. of Electronic Engineering, Chungnam National University) ;
  • Hyoungho Ko (Dept. of Electronic Engineering, Chungnam National University)
  • 신동철 (충남대학교 전자공학과) ;
  • 고형호 (충남대학교 전자공학과)
  • Received : 2023.04.30
  • Accepted : 2023.05.24
  • Published : 2023.05.31
Download PDF
⟨ Previous Next ⟩

Abstract

Test devices can perform various functions, such as research on detection targets, sensors that detect detection targets, combined products containing sensors, and certification for the launch of combined products. However, the scope of use of test devices is limited because they perform only a single role or could only serve a particular purpose in the past. Therefore, studies on test devices that can perform various functions, such as research on detection targets, sensors that detect detection targets, combined products containing sensors, and certification for the release of combined products are necessary. Accordingly, this study proposes a test device that can increase the scope of use in the technical field of electric fires. In addition, we examine various outcomes of the proposed test device.

Keywords

Acknowledgement

이 연구는 2022년도 대전테크노파크 창업지원기반조성사업 및 2022년도 중소벤처기업부 디딤돌 창업성장기술개발사업에 의해 지원되었습니다. 또한 이 연구는 충남대학교 학술연구비에 의해 지원되었습니다.

References

  1. B. J. Jeong and K. W. Lee, "A Comparative Study on the Toxicity Evaluation for Fire Smoke by FDS", J. Korean Institute Gas., Vol. 19, No. 1, pp. 38--44, 2015.  https://doi.org/10.7842/kigas.2015.19.1.38
  2. Y. K. Park, "A Study on Combustion Gases Toxicity Evaluation of Polymeric Material", T. Korean Institute Fire Sci. Eng., Vol. 15, No. 3, 2001. 
  3. G. S. Kim, J. T. Oh, H. S. Kim, and J. C. Kim. "A Study on CO2 Sensor Module Using NDIR Method", J. Korean Institute Electronics Eng., Vol 46, pp. 36-40, 2009. 
  4. J. Y. Jang, K. W. Lee, Y. J. Kim, and W. T. Kim, "S- A Design and Implementation of Busbar Joint and Temperature Measurement System FDS: a Smart Fire Detection System based on the Integration of Fuzzy Logic and Deep Learning", J. Institute Electron. Inf. Eng., Vol. 54, No. 4, pp. 379-385, 2017.  https://doi.org/10.6109/jkiice.2017.21.2.379
  5. S. H. Hong and M. S. Choi, "An Intelligent Fire Detection Algorithm for Fire Detector", J. Korean Institute Safety, Vol. 11, No. 1, pp. 6-10, 2012. 
  6. H. Amer and R. Daoud, "Fault-Secure Multidetector Fire Protection System for Trains", IEEE Instrum. Meas. Soc., Vol. 56, No. 3, pp. 770-777, 2007.  https://doi.org/10.1109/TIM.2007.894226
  7. S. H. Cho, H. W. Jang, J. W. Jeon, S. I. Choi, S. G. Kim, Z. Jiang, S. J. Choi, and C. W. Park, "A Study on the Early Fire Detection by Using Multi-Gas Sensor", J. Sensor Sci., Vol. 23, No. 5, pp. 342-348, 2014.  https://doi.org/10.5369/JSST.2014.23.5.342
  8. M. D. Blagojeviae and D. M. Petkoviae, "Detecting fire in early stage-a new approach", Working Living Environ. Prot., Vol. 2, No. 1, pp. 19-26, 2001. 
  9. R. W. Bukowski and P. A. Reneke, "New approaches to the interpretation of signals from fire sensors", Int.l Conf. Autom. Fire Detect., pp. 11-21, 1999. 
  10. K. A. Notarianni, D. Cyganski, and R. J. Duckworth, "Development of a portable flashover predictor", Int. Conf. Safety, Gandhinagar, India 2012. 
  11. D. T. Gottuk, M. J. Peatross, R. J. Roby, and C. L. Beyler, "Advanced fire detection using multi-signature alarm algorithms", J. Fire Safety, Vol. 37, No. 4, pp. 381-394, 2002.  https://doi.org/10.1016/S0379-7112(01)00057-1
  12. R. Davies, "The use of detectors in modern fire protection, apolo fire detectors", Fire Safety Eng., pp. 28-30, 2000. 
  13. G. J. Lee, W. Y. Choi, and Y. S. Lee, "Multisensor smoke detector for the auto-addressable detector bus SynoLOOP", SIEMENS, Siemens Building Tech., pp. 846-847, 2003.