Steel and Composite Structures

  • 제47권4호
  • /
  • Pages.451-454
  • /
  • 2023
  • /
  • 1229-9367(pISSN)
  • /
  • 1598-6233(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Assessment of geological hazards in landslide risk using the analysis process method

  • 투고 : 2023.02.14
  • 심사 : 2023.05.02
  • 발행 : 2023.05.25
⟨ 이전 논문 다음 논문 ⟩

초록

Landslides are one of the natural disasters that cause a lot of financial and human losses every year It will be all over the world. China, especially. The Mainland China can be divided into 12 zones, including 4 high susceptibility zones, 7 medium susceptibility zones and 1 low susceptibility zone, according to landslide proneness. Climate and physiography are always at risk of landslides. The purpose of this research is to prepare a landslide hazard map using the Hierarchical Analysis Process method. In the GIS environment, it is in a part of China watershed. In order to prepare a landslide hazard map, first with Field studies, a distribution map of landslides in the area and then a map of factors affecting landslides were prepared. In the next stage, the factors are prioritized using expert opinion and hierarchical analysis process and nine factors including height, slope, slope direction, geological units, land use, distance from Waterway, distance from the road, distance from the fault and rainfall map were selected as effective factors. Then Landslide risk zoning in the region was done using the hierarchical analysis process model. The results showed that the three factors of geological units, distance from the road and slope are the most important have had an effect on the occurrence of landslides in the region, while the two factors of fault and rainfall have the least effect The landslide occurred in the region.

키워드

참고문헌

  1. Abad, F., Rouzegar, J. and Lotfian, S. (2023), "Application of the exact spectral element method in the analysis of the smart functionally graded plate", Steel Compos. Struct., 47, 297-313. https://doi.org/10.12989/scs.2023.47.2.297.
  2. Amoli, A., Kolahchi, R. and Rabani Bidgoli, M. (2018), "Seismic analysis of AL2O3 nanoparticles-reinforced concrete plates based on sinusoidal shear deformation theory", Earthq. Struct., 15(3), 285-294. https://doi.org/10.12989/eas.2018.15.3.285.
  3. Amnieh, H.B., Zamzam, M.S. and Kolahchi, R. (2018), "Dynamic analysis of non-homogeneous concrete blocks mixed by SiO2 nanoparticles subjected to blast load experimentally and theoretically", Constr. Build. Mater., 174, 633-644. https://doi.org/10.1016/j.conbuildmat.2018.04.140.
  4. Bhasin, R., Grimstad, E. and Larsen, J.O. (2002), "Landslide hazards and mitigation measures at Gangtok, Sikkim Himalaya", Eng. Geol., 64(4), 351-368. https://doi.org/10.1016/S0013-7952(01)00096-5.
  5. Ding, X.Z. (1983), Play Full Attention to the Landslide Commission in Landslide Analysis and Control, Chongqing Science and Technology Literature Publishing House, China.
  6. Dong, B.P. (1986), "Another new large-scale landslide in Tufengyan, Majiaba of the Three Gorges", Yantze River. Bulletin of Soil Water and Conservation, 6(5), 33-40.
  7. Feng, X.C. and Zou, J.S. (1984), "Cause of Hongtupo landslide and its counter-measures", Bull. Soil Water Conserv., 4(3), 24-26.
  8. Golabchi, H., Kolahchi, R. and Bidgoli, M.R. (2018), "Vibration and instability analysis of pipes reinforced by SiO2 nanoparticles considering agglomeration effects", Comput. Concrete, 21(4), 431-440. https://doi.org/10.12989/cac.2018.21.4.431.
  9. Hajmohammad, M.H., Zarei, M.S., Nouri, A. and Kolahchi, R. (2017), "Dynamic buckling of sensor/functionally graded-carbon nanotube-reinforced laminated plates/actuator based on sinusoidal-visco-piezoelasticity theories", J. Sandw. Struct. Mater., https://doi.org/10.1177/1099636217720373.
  10. Huang, R.Q. (2009), "Some catastrophic landslides since the twentieth century in the southwest of China", Landslides, 6(1), 69-81. https://doi.org/10.1007/s10346-009-0142-y.
  11. Lin, P.S., Lin, J.Y. and Hung, J.C. (2002), "Assessing debris-flow hazard in a watershed in Taiwan", Eng. Geol., 66 (3-4), 295-313, https://doi.org/10.1016/S0013-7952(02)00105-9.
  12. Motezaker, M., Kolahchi, R., Rajak, D.K. and Mahmoud, S. R. (2021), "Influences of fiber reinforced polymer layer on the dynamic deflection of concrete pipes containing nanoparticle subjected to earthquake load", Polym. Compos., 42(8), 4073-4081. https://doi.org/10.1002/pc.26118.
  13. Rong, C., Tian, W., Wang, P. and Shi, Q. (2023), "Research on a novel shear lead damper: experiment study and design method", Steel Compos. Struct. 45, 865-876. https://doi.org/10.12989/scs.2022.45.6.865.
  14. Tan, Z. (2023), "A novel design method for improving collapse resistances of multi-story steel frames with unequal spans using steel braces", Steel Compos. Struct., 47, 253-267.
  15. Yamagishi, H. (2000), "Recent landslides in western Hokkaido, Japan", Pure Appl. Geophys., 157(6-8), 1115-1134. https://doi.org/10.1007/s000240050020.
  16. Yan, R. (2006), "Secondary disaster and environmental effect of landslide and collapsed dams in the upper reaches of Minjiang River", MS Thesis, Sichuan University, Chengdu.