DOI QR코드

DOI QR Code

Anti-tank impact absorption with a reinforced concrete plate design

  • Berivan Yilmazer Polat (Department of Architecture, Faculty of Fine Arts, Design and Architecture, Munzur University) ;
  • Sedat Savas (Department of Civil Engineering, Faculty of Engineering, Firat University) ;
  • Alper Polat (Department of Civil Engineering, Faculty of Engineering, Munzur University)
  • 투고 : 2022.11.19
  • 심사 : 2023.03.13
  • 발행 : 2023.04.25

초록

Anti-tank weapons are among the infantry weapons used by the armies of many countries. Anti-tank rockets and explosives such as TNT, generally used for armour piercing, are also frequently used in terrorist attacks. These attacks damage the protection facilities built from reinforced concrete. Rockets or similar explosives' rapid speed and burst temperatures pierce reinforced concrete during strikes, resulting in casualties and damage to crucial strategic structures. This study aimed to devise an economic and applicable reinforced concrete plate that could absorb the impact of anti-tank rockets and Trinitrotoluene (TNT) type explosives. Therefore, 5 different samples, produced from C50 reinforced concrete and 150×150 cm in size, were formed by combining plates of different numbers and thicknesses. Also, a sample, which was a single thick plate, was prepared. In destructive testing, Rocket Propelled Grenade (RPG-7) was used as the anti-tank rocket launcher. As a result of this study, the impact damage was reduced with hollow concrete plate geometries, and recommendations were developed for complete prevention.

키워드

과제정보

This research was supported by the project (Project no: GPMUB019-01) by Munzur University. In addition, the authors thank Prof. Dr. Ubeyde IPEK and Tunceli Gendarmerie Provincial Command for technical support.

참고문헌

  1. Alsubaei, F.C.F. (2015), "Performance of protective perimeter walls subjected to explosions in reducing the blast resultants on buildings", Electronic Thesis and Dissertation Repository; Western University, Canada. 
  2. Cheng, W., Wenlong, X. and Steeve, C. (2018), "Penetration of shaped charge into layered and spaced concrete targets", Int. J. Impact Eng., 112, 193-206. https://doi.org/10.1016/j.ijimpeng.2017.10.013 
  3. Defense, D.O.A. (2008), Design To Resist Direct Fire Weapons Effects, Patent: UFC 4-023-07, US, 2008. 
  4. Dimitrieff, G. (1996), The poor man's RPG, ISBN 0-87947-154-9. 
  5. Esteban, B., Lenhart, L.M., Rudiger, L. and Gebbeken, N. (2015), "An evaluation of shaped charge experiments using concrete components", Int. J. Protect. Struct., 6(3), 439-456. https://doi.org/10.1260/2041-4196.6.3.439 
  6. Kay, H.C. (2008), "Analysis of shallowly buried reinforced concrete box structures subjected to airblast loads", Ph.D. Dissertation; University of Florida, FL, USA. 
  7. Kojima, I. (1991), "An experimental study on local behaviour of reinforced concrete slabs to missile impact", Nuclear Eng. Des., 130(2), 121-132. https://doi.org/10.1016/0029-5493(91)90121-W 
  8. Li, J., Wu, C. and Hao, H. (2016), "Spallation of reinforced concrete slabs under contact explosion", Proceedings of 2016 Second Asian Conference on Defence Technology (ACDT), Chiang Mai, Thailand, pp. 42-45. https://doi.org/10.1109/ACDT.2016.7437641 
  9. Liew, J.Y.R. (2008), "Survivability of steel frame structures subject to blast and fire", J. Constr. Steel Res., 64(7-8), 854-866. https://doi.org/10.1016/j.jcsr.2007.12.013 
  10. Luccioni, B.M. and Ambrosini, R.D. (2010), "Numerical assessment of blast effects scaling procedures", Associacion Argentina de Mecanica Computacional, 29(12), 1161-1179. ISSN 2591-3522 
  11. Murphy, M.J., Baum, D.W., Kuklo, R.M. and Simonson, S.C. (2001), "Effect of multiple and delayed jet impact and penetration on concrete target borehole diameter", Proceedings of the 19th International Symposium on Ballistics, Interlaken, Switzerland, May. 
  12. Ngo, T., Mendis, P., Gupta, A. and Ramsay, J. (2007), "Blast loading and blast effects on structures - an overview", Electron. J. Struct. Special Issue: Loading on Structures, 76-90. https://doi.org/10.56748/ejse.671 
  13. Savas, S. and Bakir, D. (2023), "An investigation of the effects of the vehicle terror suicide attack in the urban area", Eng. Fail. Anal., 145, 107049. https://doi.org/10.1016/j.engfailanal.2023.107049 
  14. TM 5-1300 (1990), Structures to Resist the Effects of Accidental Explosion, Departments of the Army, the Navy and the Air Force, TM 5-1300, NAVFACP-379, AFR 88-22. 
  15. Wang, F., Kong, Y., Wan, M., Yi, O., Chong, K., Lim, C., Tze, E. and Lim, M. (2008), "Reinforced Concrete Slab Subjected to Close-in Explosion", Defense Science and Technology Agency, Bamberg. 
  16. Xu, X.Z. and Ma, T.B. and Ning, J.G. (2017), "The damage and failure mechanism of the concrete subjected to shaped charge loading", Eng. Fail. Anal., 82, 741-752. https://doi.org/10.1016/j.engfailanal.2017.06.031 
  17. Yap, C.H. (2012), "The Impact of Armor on The Design, Utilization and Survivability of Ground Vehicles: The History of Armor Development and Use, California", Master's Thesis, Naval Postgraduate School Monterey.