Earthquakes and Structures

  • 제24권5호
  • /
  • Pages.365-375
  • /
  • 2023
  • /
  • 2092-7614(pISSN)
  • /
  • 2092-7622(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Investigation of the effect of damper location and slip load calculation on the behavior of a RC structure

  • Mehmet Sevik (Department of Civil Engineering, Manisa Celal Bayar University) ;
  • Taha Yasin Altiok (Department of Civil Engineering, Manisa Celal Bayar University) ;
  • Ali Demir (Department of Civil Engineering, Manisa Celal Bayar University)
  • 투고 : 2022.10.17
  • 심사 : 2023.04.23
  • 발행 : 2023.05.25
⟨ 이전 논문 다음 논문 ⟩

초록

Energy dissipation systems increase the energy dissipation capacity of buildings considerably. In this study, the effect of dampers on a typical 10-storey reinforced concrete structure with a ductile moment-resisting frame was investigated. In this context, 5 different models were created according to the calculation of the slip load and the positions of the dampers in the structure. Nonlinear time-history analyzes using 11 different earthquake acceleration records were performed on the models using the ETABS program. As a result of the analyses, storey displacements, energy dissipation ratios, drift ratios, storey accelerations, storey shears, and hysteretic curves of the dampers on the first and last storey and overturning moments are presented. In the study, it was determined that friction dampers increased the energy dissipation capacities of all models. In addition, it has been determined that positioning the dampers in the outer region of the structures and taking the base shear as a basis in the slip load calculation will be more effective.

키워드

참고문헌

  1. Armali, M., Damerji, H., Hallal, J. and Fakih, M. (2019), "Effectiveness of friction dampers on the seismic behavior of high rise building VS shear wall system", Eng. Rep., 1(5), e12075. https://doi.org/10.1002/eng2.12075.
  2. Bhaskararao, A.V. and Jangid, R.S. (2004), "Seismic response of adjacent buildings connected with dampers", 13th World Conference on Earthquake Engineering, Vancouver, BC, Canada, August.
  3. Chan, R.W. and Tang, W. (2022), "Serviceability conditions of friction dampers for seismic risk mitigations", Struct., 35, 500-510. https://doi.org/10.1016/j.istruc.2021.11.033.
  4. Damptech Earthquake Protection (2022), Other Countries; Damptech, Lyngby, Denmark. https://www.damptech.com/
  5. Erdemli, M.E. (2015), "Sonumleyiciler ile bagli betonarme perde duvarli yuksek yapilarda esdeger sonumleme yontemlerinin incelenmesi", Ph.D. Thesis, Fen Bilimleri Enstitusu, Istanbul Technical University, Istanbul, Turkiye.
  6. Grigorian, C.E., Yang, T.S. and Popov, E.P. (1993), "Slotted bolted connection energy dissipators", Earthq. Spectra, 9(3), 491-504. https://doi.org/10.1193/1.1585726.
  7. Matsagar, V.A. and Jangid, R.S. (2005), "Viscoelastic damper connected to adjacent structures involving seismic isolation", J. Civil Eng. Manage., 11(4), 309-322. https://doi.org/10.1080/13923730.2005.9636362.
  8. Melik, M. (2002), "Active mass damper and active tendon control for earthquake excited structures", Ph.D. Thesis, Istanbul Technical University, Istanbul, Turkiye.
  9. Mevada, S.V. and Jangid, R.S. (2012), "Seismic response of asymmetric systems with linear and non-linear viscous dampers", Int. J. Adv. Struct. Eng., 4(1), 1-20. https://doi.org/10.1186/2008-6695-4-5.
  10. Mualla, I. and Belev, B. (2017), "Overview of recent projects implementing rotational friction dampers", 16th World Conference on Earthquake Engineering, Santiago, Chile, January.
  11. Pall, A. (2004), "Performance-based design using pall friction dampers-an economical design solution", 13th World Conference on Earthquake Engineering, Vancouver, BC, Canada, August.
  12. Pall, A.S., Marsh, C. and Fazio, P. (1980), "Friction joints for seismic control of large panel structures", J. Prestress. Concrete Inst., 25(6), 38-61. https://doi.org/10.15554/pcij.11011980.38.61.
  13. Paronesso, M. and Lignos, D.G. (2021), "Experimental study of sliding friction damper with composite materials for earthquake resistant structures", Eng. Struct., 248, 113063. https://doi.org/10.1016/j.engstruct.2021.113063.
  14. Patel, C.C. and Jangid, R.S. (2011), "Dynamic response of adjacent structures connected by friction damper", Earthq. Struct., 2(2), 149-169. https://doi.org/10.12989/eas.2011.2.2.149.
  15. Peer Ground Motion Database (2022), Spectras; Pasific Earthquake Engineering Research Center, CA, USA. https://ngawest2.berkeley.edu/
  16. Pilorge, A.G. (2018), "Impact of friction dampers and ductility factor on the seismic response of concrete moment resisting frame buildings", Master's thesis, Department of Building, Civil & Environmental Engineering, Concordia University.
  17. Quaketek Earthquake Protection (2022), Seismic Design; Quaketek, Montreal, Canada. https://www.quaketek.com/
  18. Sarjou, P.H. and Shabakhty, N. (2017), "Effect of the improved pall friction damper on the seismic response of steel frames", Eng. Technol. Appl. Sci. Res., 7(4), 1833-1837. https://doi.org/10.48084/etasr.1176.
  19. Symans, M.D. and Constantinou, M.C. (1999), "Semi-active control systems for seismic protection of structures: A state-of-the-art review", Eng. Struct., 21(6), 469-487. https://doi.org/10.1016/S0141-0296(97)00225-3.
  20. TBEC (2018), Turkish Building Seismic Code, Disaster and Emergency Management Authority (in Turkish), Ankara, Turkiye.
  21. Thayyil, N.K. and Thampan, C.P.V. (2018), "Seismic evaluation of a RC framed structure equipped with and without friction damper device", Int. Res. J. Eng. Technol., 5(8), 10-16.
  22. Vaseghi, J., Navaei, S., Navayinia, B. and Roshantabari, F. (2009), "A parametric assessment of friction damper in eccentric braced frame", Int. J. Civil Environ. Eng., 3(10), 361-365. https://doi.org/10.5281/zenodo.1083359.
  23. Weber, F., Feltrin, G. and Huth, O. (2006), "Guidelines for structural control", Structural Engineering Research Laboratory, Swiss Federal Laboratories for Material Testing and Research, Dubendorf, Switzerland.
  24. Whittaker, A.S., Bertero, V.V., Thompson, C.L. and Alonso, L.J. (1991), "Seismic testing of steel plate energy dissipation devices", Earthq. Spectra, 7(4), 563-604. https://doi.org/10.1193/1.1585644.
  25. Zimbru, M., D'Aniello, M., Martino, A.D., Latour, M., Rizzano, G. and Piluso, V. (2018), "Investigation on friction features of dissipative lap shear connections by means of experimental and numerical tests", Open Constr. Build. Technol. J., 12(1), 154-169. http://doi.org/10.2174/1874836801812010154.