Steel and Composite Structures

  • 제47권3호
  • /
  • Pages.437-450
  • /
  • 2023
  • /
  • 1229-9367(pISSN)
  • /
  • 1598-6233(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Research on axial bearing capacity of cold-formed thin-walled steel built-up column with 12-limb-section

  • Wentao Qiao (School of Civil Engineering, ShiJiazhuang Tiedao University) ;
  • Yuhuan Wang (China Design Group Co. Ltd.) ;
  • Ruifeng Li (School of Civil Engineering, ShiJiazhuang Tiedao University) ;
  • Dong Wang (TRC Companies) ;
  • Haiying Zhang (School of Civil Engineering, Southeast University)
  • 투고 : 2022.04.29
  • 심사 : 2023.04.21
  • 발행 : 2023.05.10
⟨ 이전 논문 다음 논문 ⟩

초록

A half open cross section built-up column, namely cold-formed thin-walled steel built-up column with 12-limbsection (CTSBC-12) is put forward. To deeply reveal the mechanical behaviors of CTSBC-12 under axial compression and put forward its calculation formula of axial bearing capacity, based on the previous axial compression experimental research, the finite element analysis (FEA) is conducted on 9 CTSBC-12 specimens, and then the variable parameter analysis is carried out. The results show the FEA is in good agreement with the experimental research, the ultimate bearing capacity error is within 10%. When the slenderness ratio is more than 96.54, the ultimate bearing capacity of CTSBC-12 decreases rapidly, and the failure mode changes from local buckling to global buckling. With the local buckling failure mode unchanged, the ultimate bearing capacity decreases gradually as the ratio of web height to thickness increases. Three methods are used for calculating the ultimate bearing capacity, the direct strength method of AISI S100-2007 gives result of ultimate axial load which is closest to the test and FEA results. But for simplicity and practicality, a simplified axial bearing capacity formula is proposed, which has better calculation accuracy with the slenderness ratio changing from 30 to 100.

키워드

과제정보

This research was funded by Science and Technology Research Key Project in Higher Institutions of Hebei Province (ZD2018250), Local Science and Technology Development Fund Project Guided by Central Government (206Z7601G) and Natural Science Foundation of Hebei Province (E2020210074 & E2022210084).

참고문헌

  1. Abdel-Rahman, N. and Sivakumaran, K.S. (1997), "Material properties models for analysis of cold-formed steel members", J. Struct. Eng., 123(9), 1135-1143. https://doi.org/10.1061/(ASCE)0733-9445(1997)123:9(1135)
  2. AISI (2007), Specification for the Design of Cold-Formed Steel Structural Members, Washington, DC.
  3. Al Ali, M., Tomko, M., Demjan, I. and Kvocak, V. (2012), "Thin-walled cold-formed compressed steel members and the problem of initial imperfections", Procedia Eng., 40, 8-13. https://doi.org/10.1016/j.proeng.2012.07.047.
  4. Anbarasu, M. and Dar, M.A. (2020), "Improved design procedure for battened cold-formed steel built-up columns composed of lipped angles", J. Construct. Steel Res., 164, 105781. https://doi.org/10.1016/j.jcsr.2019.105781.
  5. Dar, M.A., Sahoo, D.R. and Jain, A.K. (2021), "Interaction between chord compactness and lacing slenderness in CFS built-up columns", Structures, 30, 985-995. https://doi.org/10.1016/j.istruc.2021.01.065.
  6. Dar, M.A., Sahoo, D.R., Jain, A.K. and Verma, A. (2022), "Tests on CFS laced columns composed of plain channels: Behavior and design", J. Struct. Eng., 148(5), 04022043. https://doi.org/10.1016/j.tws.2021.108222.
  7. Dar, M.A., Sahoo, D.R., Pulikkal, S. and Jain, A.K. (2018), "Behaviour of laced built-up cold-formed steel columns: Experimental investigation and numerical validation", Thin-Walled Struct., 132, 398-409. https://doi.org/10.1016/j.tws.2018.09.012.
  8. Dar, M.A., Sahoo, D.R., Pulikkal, S. and Jain, A.K. (2018), "Behaviour of laced built-up cold-formed steel columns: Experimental investigation and numerical validation", Thin-Walled Struct., 132, 398-409. https://doi.org/10.1016/j.tws.2018.09.012.
  9. Dar, M.A., Verma, A., Anbarasu, M., Dai Pang, S. and Dar, A.R. (2022), "Design of cold-formed steel battened built-up columns", J. Construct. Steel Res., 193, 107291. https://doi.org/10.1016/j.jcsr.2022.107291.
  10. Design of Cold-Formed Steel Structural Members Using the Direct Strength Method (2004), Appendix 1 of NAS 2004, American Iron and Steel Institute, Canadian Standards Association.
  11. Feng, M., Wang, Y.C. and Davies, J.M. (2003), "Structural behaviour of cold-formed thin-walled short steel channel columns at elevated temperatures. Part 1: Experiments", Thin-Walled Struct., 41(6), 543-570. https://doi.org/10.1016/S0263-8231(03)00002-8
  12. Fratamico, D.C., Torabian, S., Zhao, X., Rasmussen, K.J. and Schafer, B.W. (2018), "Experimental study on the composite action in sheathed and bare built-up cold-formed steel columns", Thin-Walled Struct., 127, 290-305. https://doi.org/10.1016/j.tws.2018.02.002.
  13. Fratamico, D.C., Torabian, S., Zhao, X., Rasmussen, K.J. and Schafer, B.W. (2018), "Experiments on the global buckling and collapse of built-up cold-formed steel columns", J. Construct. Steel Res., 144, 65-80. https://doi.org/10.1016/j.jcsr.2018.01.007.
  14. GB50018-2002. (2002), Technical Code of Cold-Formed Thin-Walled Steel Structures, China Plan Press.
  15. Georgieva, I., Schueremans, L. and Pyl, L. (2012), "Composed columns from cold-formed steel Z-profiles: Experiments and code-based predictions of the overall compression capacity", Eng. Struct., 37, 125-134. https://doi.org/10.1016/j.engstruct.2011.12.017.
  16. Georgieva, I., Schueremans, L., Vandewalle, L. and Pyl, L. (2012), "Design of built-up cold-formed steel columns according to the direct strength method", Procedia Eng., 40, 119-124. https://doi.org/10.1016/j.proeng.2012.07.066.
  17. Guang, W. (2007), "Analysis of distortional buckling of cold-formed thin-walled lipped channel column", Hangzhou: Zhejiang University.
  18. Harry, F., Ali, S. and Ahmad, F. (2017), "A simplified method to determine shear stiffness of thin walled cold formed steel storage rack frames", J. Construct. Steel Re., 138, 799-805. https://doi.org/10.1016/j.jcsr.2017.09.012.
  19. Hernandez-Castillo, L.A., Ortiz-Lozano, J.A., Hernandez-Marin, M., Pacheco-Martinez, J., Zermeno-deLeon, M.E., Soto-Bernal, J.J. and Soto-Zamora, M.A. (2015), "Fragility curves for thin-walled cold-formed steel wall frames affected by ground settlements due to land subsidence", Thin-Walled Struct., 87, 66-75. https://doi.org/10.1016/j.tws.2014.11.010. http://ifcaf1b13095ec5284139sn0v0bpuubw566bb9fayx.eds.tju.edu.cn//10.12989/sem.2020.74.3.381.
  20. JGJ227-2011 (2011), Technical Specification for Low-Rise Cold-Formed Thin-Walled Steel Houses, China Building Industry Press.
  21. Ji, C. (2006), Theory and Application of Steel Structure Stability, Science Press, 510-514.
  22. Kherbouche, S. and Megnounif, A. (2019), "Numerical study and design of thin walled cold formed steel built-up open and closed section columns", Eng. Struct., 179, 670-682. https://doi.org/10.1016/j.engstruct.2018.10.069.
  23. Li, H. and Wen, Q. (2015), "Study on distortional buckling performance of cold-formed thin-walled steel flexural Members with stiffeners in the flange", Thin-Walled Struct., 95, 161-169. https://doi.org/10.1016/j.tws.2015.07.006
  24. Li, Y. L., Li, Y.Q. and Shen, Z.Y. (2016), "Investigation on flexural strength of cold-formed thin-walled steel beams with built-up box section", Thin-Walled Struct., 107, 66-79. https://doi.org/10.1016/j.tws.2016.05.026.
  25. Liao, F., Wu, H., Wang, R. and Zhou, T. (2017), "Compression test and analysis of multi-limbs built-up cold-formed steel stub columns", J. Construct. Steel Res., 128, 405-415. https://doi.org/10.1016/j.jcsr.2016.09.005.
  26. Mohammad, R., Javaheri-Tafti, Hamid, R., Ronagh, F.B. and Parham, M. (2014), "An experimental investigation on the seismic behavior of cold-formed steel walls sheathed by thin steel plate", Thin-Walled Struct., 80, 66-79. https://doi.org/10.1016/j.tws.2014.02.018.
  27. Mutafi, A., Yidris, N., Ishak, M.R. and Zahari, R. (2018), "An investigation on longitudinal residual strains distribution of thin-walled press-braked cold formed steel sections using 3D FEM technique", Heliyon, 4(11), e00937.
  28. Naderian, H.R. and Ronagh, H.R. (2015), "Buckling analysis of thin-walled cold-formed steel structural members using complex finite strip method", Thin-Walled Struct., 90, 74-83. https://doi.org/10.1016/j.tws.2015.01.008.
  29. Qiao, W., Wang, Y., Zhu, R., Li, R. and Zhao, M. (2021), "Experimental study on the axial bearing capacity of built-up cold-formed thin-walled steel multi-limb-section columns", Steel Compos. Struct., 40(6), 781-794. https://doi.org/10.12989/scs.2021.40.6.781.
  30. Roy, K. and Lim, J.B. (2019), "Numerical investigation into the buckling behaviour of face-to-face built-up cold-formed stainless steel channel sections under axial compression", Structures, 20, 42-73). https://doi.org/10.1016/j.istruc.2019.02.019.
  31. Roy, K., Ting, T.C.H., Lau, H.H. and Lim, J.B. (2018), "Effect of thickness on the behaviour of axially loaded back-to-back cold-formed steel built-up channel sections-Experimental and numerical investigation", Structures, 16, 327-346. https://doi.org/10.1016/j.istruc.2018.09.009.
  32. Roy, K., Ting, T.C.H., Lau, H.H. and Lim, J.B. (2019), "Experimental and numerical investigations on the axial capacity of cold-formed steel built-up box sections", J. Construct. Steel Res., 160, 411-427. https://doi.org/10.1016/j.jcsr.2019.05.038.
  33. Sani, M.M., Muftah, F. and Osman, A.R. (2019), "A review and development of cold-formed steel channel columns with oriented strand board sections", Materials Today: Proceedings, 17, 1078-1085. https://doi.org/10.1016/j.matpr.2019.06.519.
  34. Schafer, B.W. and Adany, S. (2006), "Buckling analysis of cold-formed steel members using CUFSM: conventional and constrained finite strip methods", Eighteenth international specialty conference on cold-formed steel structures, 39-54.
  35. Shahbazian, A. and Wang, Y.C. (2012), "Direct Strength Method for calculating distortional buckling capacity of cold-formed thin-walled steel columns with uniform and non-uniform elevated temperatures", Thin-Walled Struct., 53, 188-199. https://doi.org/10.1016/j.tws.2012.01.006.
  36. Shanhua, X., Zongxing, Z., Rou, L. and Hao, W. (2019), "Effect of cleaned corrosion surface topography on mechanical properties of cold-formed thin-walled steel", Construct. Build. Mater., 222, 1-14. https://doi.org/10.1016/j.conbuildmat.2019.06.130.
  37. Stone, T.A. and LaBoube, R.A. (2005), "Behavior of cold-formed steel built-up I-sections", Thin-Walled Struct., 43(12), 1805-1817. https://doi.org/10.1016/j.tws.2005.09.001.
  38. Ting, T.C.H., Roy, K., Lau, H.H. and Lim, J.B. (2018), "Effect of screw spacing on behavior of axially loaded back-to-back cold-formed steel built-up channel sections", Adv. Struct. Eng., 21(3), 474-487. https://doi.org/10.1177/1369433217719986
  39. Ungureanu, V., Kotelko, M. and Grudziecki, J. (2016), "Plastic mechanisms for thin-walled cold-formed steel members in eccentric compression", Acta Mechanica et Automatica, 10(1), 33-37. https://doi.org/10.1016/j.tws.2017.09.029.
  40. Ungureanu, V., Kotelko, M., Mania, R.J. and Dubina, D. (2010), "Plastic mechanisms database for thin-walled cold-formed steel members in compression and bending", Thin-Walled Struct., 48(10-11), 818-826. https://doi.org/10.1016/j.tws.2010.01.004.
  41. Vijayanand, S. and Anbarasu, M. (2020), "Behavior of CFS built-up battened columns: Parametric study and design recommendations", Struct. Eng. Mech., 74(3), 381-394.
  42. Vijayanand, S. and Anbarasu, M. (2021), "Parametric study and Improved design guidelines of CFS battened built-up columns", Steel Compos. Struct., 40(5), 733-746. http://ifcaf1b13095ec5284139sn0v0bpuubw566bb9fayx.eds.tju.edu.cn//10.12989/scs.2021.40.5.733.
  43. Young, B. and Chen, J. (2008), "Design of cold-formed steel built-up closed sections with intermediate stiffeners", J. Struct. Eng., 134(5), 727-737. https://doi.org/10.1061/(ASCE)0733-9445(2008)134:5(727)
  44. Yuanqi, L.i., Zuyan, S. and Lei, W. (2007), "Analysis and design reliability of axially compressed members with high-strength cold-formed thin-walled steel", Thin-Walled Struct., 45(4), 473-492. https://doi.org/10.1016/j.tws.2007.02.012.
  45. Zhang, J.H. and Young, B. (2018), "Finite element analysis and design of cold-formed steel built-up closed section columns with web stiffeners", Thin-Walled Struct., 131, 223-237. https://doi.org/10.1016/j.tws.2018.06.008.
  46. Zhangjie, L. (2018), "Stochastically simulated mode interactions of thin-walled cold-formed steel members using modal identification", Thin-Walled Struct., 128, 171-183. https://doi.org/10.1016/j.tws.2017.10.012.
  47. Zhongquan, Z. (1991), "Stability calculation of cold-formed thin-walled steel members under axial compression", J. Architect. Struct., 12(04), 2-10.