References
- L. Xu, Z. Huang, B. Tang, et al., Numerical simulation of the flow and phase change characteristics of ice particles-seawater two-phase flow in heat exchanger of polar ship, in: 2017 4th International Conference on Transportation Information and Safety (ICTIS), 2017, pp. 468-474.
- C. Ezgi, N. Ozbalta, I. Girgin, Thermohydraulic and thermoeconomic performance of a marine heat exchanger on a naval surface ship, Appl. Therm. Eng. 64 (1-2) (2014) 413-421. https://doi.org/10.1016/j.applthermaleng.2013.12.061
- H. Li, V. Kottke, Visualization and determination of local heat transfer co-efficients in shell-and-tube heat exchangers for staggered tube arrangement by mass transfer measurements, Exp. Therm. Fluid Sci. 17 (3) (1998) 210-216. https://doi.org/10.1016/S0894-1777(97)10064-4
- H. Li, V. Kottke, Effect of baffle spacing on pressure drop and local heat transfer in shell-and-tube heat exchangers for staggered tube arrangement, Int. J. Heat Mass Tran. 41 (10) (1998) 1303-1311. https://doi.org/10.1016/S0017-9310(97)00201-9
- J. Lutcha, J. Nemcansky, Performance improvement of tubular heat exchangers by helical baffles, Chem. Eng. Res. Des. 68 (A3) (1990).
- S. Zeyninejad Movassag, F. Nemati Taher, K. Razmi, et al., Tube bundle replacement for segmental and helical shell and tube heat exchangers: performance comparison and fouling investigation on the shell side, Appl. Therm. Eng. 51 (1) (2013) 1162-1169. https://doi.org/10.1016/j.applthermaleng.2012.10.025
- J.-F. Yang, Y.-S. Lin, H.-B. Ke, et al., Investigation on combined multiple shell-pass shell-and-tube heat exchanger with continuous helical baffles, Energy 115 (2016) 1572-1579. https://doi.org/10.1016/j.energy.2016.05.090
- G.V. Teja, K.N. Rao, Numerical investigation on heat transfer and fluid flow of shell-side for shell and tube heat exchanger with hexagonal vent baffle by using CFD, Int. J. Mech. Eng. Technol. 8 (5) (2017) 995-1009.
- H. Bayram, G. Sevilgen, Numerical investigation of the effect of variable baffle spacing on the thermal performance of a shell and tube heat exchanger, Energies 10 (8) (2017) 1156.
- N. Li, J. Chen, T. Cheng, et al., Analysing thermal-hydraulic performance and energy efficiency of shell-and-tube heat exchangers with longitudinal flow based on experiment and numerical simulation, Energy 202 (2020), 117757.
- H. Darcy, Les fontaines publiques de la ville de Dijon: exposition et application, Victor Dalmont, Paris, France, 1856.
- M. Prithiviraj, M. Andrews, Three dimensional numerical simulation of shell-and-tube heat exchangers. Part I: foundation and fluid mechanics, Numer. Heat Tran., Part A: Applications 33 (8) (1998) 799-816. https://doi.org/10.1080/10407789808913967
- M. Prithiviraj, M. Andrews, Three-dimensional numerical simulation of shell-and-tube heat exchangers. Part II: heat transfer, Numer. Heat Tran., Part A: Applications 33 (8) (1998) 817-828. https://doi.org/10.1080/10407789808913968
- M. Wang, Y. Wang, W. Tian, et al., Recent progress of CFD applications in PWR thermal hydraulics study and future directions, Ann. Nucl. Energy 150 (2021), 107836.
- C. Zeng, M. Wang, G. Wu, et al., Numerical study on the enhanced heat transfer characteristics of steam generator with axial economizer, Int. J. Therm. Sci. 182 (2022), 107794.
- D. Mu, M. Wang, J. Zhang, et al., Migration-deposition coupling characteristics and influence of corrosion products on heat transfer in steam generators, Appl. Therm. Eng. 211 (2022), 118507.
- X. Zhao, M. Wang, G. Wu, et al., The development of high fidelity Steam Generator three dimensional thermal hydraulic coupling code: STAF-CT, Nucl. Eng. Technol. 53 (3) (2021) 763-775. https://doi.org/10.1016/j.net.2020.07.043
- Jinxiang Sun, Ruibo Zhang, Mingjun Wang, Jing Zhang, Suizheng Qiu, Wenxi Tian, G.H. Su, Multi-objective optimization of helical coil steam generator in high temperature gas reactors with genetic algorithm and response surface method, Energy 259 (2022), 124976.
- T. Cong, R. Zhang, W. Tian, et al., Development and preliminary validation of a steam generator 3D thermohydraulics analysis code STAF, Nucl. Eng. Des. 298 (2016) 135-148. https://doi.org/10.1016/j.nucengdes.2015.12.027
- X. Wang, M. Wang, G. Wu, et al., Local effect model development for the steam generator three dimensional thermal hydraulics analysis code, Ann. Nucl. Energy 136 (2020), 107020.
- Irfan Khan, Mingjun Wang, Yapei Zhang, Wenxi Tian, Guanghui Su, Suizheng Qiu, Two-phase bubbly flow simulation using CFD method: a review of models for interfacial forces, Prog. Nucl. Energy 125 (2020), 103360.
- X. Zhao, M. Wang, C. Chen, et al., Three-dimensional study on the hydraulic characteristics under the steam generator (SG) tube plugging operations for AP1000, Prog. Nucl. Energy 112 (2019) 63-74. https://doi.org/10.1016/j.pnucene.2018.10.016
- S. Patankar, D. Spalding, A calculation procedure for transient and steady state behavior of shell-and-tube heat exchangers, in: N.H. Afgan, E.U. Schlunder (Eds.), Heat Exchanger Design Theory Source Book, McGraw-Hill, New York, US, 1974.
- S. He, M. Wang, W. Tian, et al., Development of an OpenFOAM solver for numerical simulations of shell-and-tube heat exchangers based on porous media model, Appl. Therm. Eng. 210 (2022), 118389.
- O. Nylund, Hydrodynamic and Heat Transfer Measurements on a Full-Scale Simulated 36-rod BHWR Fuel Element with Non-uniform Axial and Radial Heat Flux Distribution, ASEA-ATOM, Vasteras, Sweden, 1970.
- O. Nylund, K.M. Becker, R. Eklund, et al., Hydrodynamic and Heat Transfer Measurements on a Full-Scale Simulated 36-rod Marviken Fuel Element with Non-uniform Radial Heat Flux Distribution, ASEA-ATOM, Vasteras, Sweden, 1968.
- J. Kim, T. Sibilli, M.Y. Ha, et al., Compound porous media model for simulation of flat top U-tube compact heat exchanger, Int. J. Heat Mass Tran. 138 (2019) 1029-1041. https://doi.org/10.1016/j.ijheatmasstransfer.2019.04.116
- W.H. MacAdams, Heat Transmission, McGraw Hill, New York, USA, 1954.
- E. Grimison, Correlation and utilization of new data on flow resistance and heat transfer for cross flow of gases over tube banks, Transactions of ASME 59 (7) (1937) 583-594. https://doi.org/10.1115/1.4020557
- F.W. Dittus, L.M.K. Boelter, Heat transfer in automobile radiators of the tubular type, Int. Commun. Heat Mass Tran. 12 (1) (1985) 3-22. https://doi.org/10.1016/0735-1933(85)90003-X
- D.A. Dingee, W. Bell, J. Chastain, S.L. Fawcett, Heat Transfer from Parallel Rods in Axial Flow, Battelle Memorial Inst., Columbus, 1955 (OH, USA).
- O. Dwyer, T. Sheehan, J. Weisman, F.L. Horn, R.T. Schomer, Cross flow of water through a tube bank at Reynolds numbers up to a million, Ind. Eng. Chem. 48 (10) (1956) 1836-1846. https://doi.org/10.1021/ie50562a028
- A.K. Singhal, L.W. Keeton, A.J. Przekwas, et al., ATHOS3: A Computer Program for Thermal-Hydraulic Analysis of Steam Generators. Volume 1: Mathematical and Physical Models and Method of Solution, Cham of North America Incorporated, Palo Alto, CA, USA, 1984.