Advances in concrete construction

  • 제16권3호
  • /
  • Pages.155-167
  • /
  • 2023
  • /
  • 2287-5301(pISSN)
  • /
  • 2287-531X(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Service life evaluation of HPC with increasing surface chlorides from field data in different sea conditions

  • Jong-Suk Lee (Department of Structural Engineering Research, Korea Institute of Civil Engineering and Building Technology) ;
  • Keun-Hyeok Yang (Department of Plant and Architectural Engineering, Kyonggi University) ;
  • Yong-Sik Yoon (Korean Peninsula Infrastructure Special Committee, Korea Institute of Civil Engineering and Building Technology) ;
  • Jin-Won Nam (Department of Civil and Environmental Engineering, Inha Technical College) ;
  • Seug-Jun Kwon (Department of Civil and Environmental Engineering, Hannam University)
  • 투고 : 2023.07.03
  • 심사 : 2023.11.20
  • 발행 : 2023.09.25
⟨ 이전 논문 다음 논문 ⟩

초록

The penetrated chloride in concrete has different behavior with mix proportions and local exposure conditions, even in the same environments, so that it is very important to quantify surface chloride contents for durability design. As well known, the surface chloride content which is a key parameter like external loading in structural safety design increases with exposure period. In this study, concrete samples containing OPC (Ordinary Portland Cement), GGBFS (Ground Granulated Blast Furnace Slag), and FA (Fly Ash) had been exposed to submerged, tidal, and splash area for 5 years, then the surface chloride contents changing with exposure period were evaluated. The surface chloride contents were obtained from the chloride profile based on the Fick's 2nd Law, and the regression analysis for them was performed with exponential and square root function. After exposure period of 5 years in submerged and tidal area conditions, the surface chloride content of OPC concrete increased to 6.4 kg/m3 - 7.3 kg/m3, and the surface chloride content of GGBFS concrete was evaluated as 7.3 kg/m3 - 11.5 kg/m3. In the higher replacement ratio of GGBFS, the higher surface chloride contents were evaluated. The surface chloride content in FA concrete showed a range of 6.7 kg/m3 to 9.9 kg/m3, which was the intermediate level of OPC and GGBFS concrete. In the case of splash area, the surface chloride contents in all specimens were from 0.59 kg/m3 to 0.75 kg/m3, which was the lowest of all exposure conditions. Experimental constants available for durability design of chloride ingress were derived through regression analysis over exposure period. In the concrete with GGBFS replacement ratio of 50%, the increase rate of surface chloride contents decreased rapidly as the water to binder ratio increased.

키워드

과제정보

This research was supported by Korea Institute of Marine Science & Technology Promotion (KIMST) funded by the Ministry of Oceans and Fisheries, Korea (20210603), and also supported by the National Research Foundation of Korea (NRF) grant funded by the Korea government(MSIT) No. NRF-2020R1A2C2009462).

참고문헌

  1. ACI Committee 365 (2000), Service-Life Prediction-State-of-the-Art Report, ACI Committee, Farmington Hills.
  2. Bamforth, P.B. (1999), "The derivation of input data for modelling chloride ingress from eight-year UK coastal exposure trials", Mag. Concrete Res., 51(2), 87-96. https://doi.org/10.1680/macr.1999.51.2.87
  3. Broomfield, J.P. (2006), Corrosion of Steel in Concrete: Understanding, Investigation and Repair, CRC Press, London, UK.
  4. Chung, L., Kim, J.H.J. and Yi, S.T. (2008), "Bond strength prediction for reinforced concrete members with highly corroded reinforcing bars", Cem. Concrete Compos., 30(7), 603-611. https://doi.org/10.1016/j.cemconcomp.2008.03.006
  5. Dinakar, P., Babu, K.G. and Santhanam, M. (2007), Corrosion behaviour of blended cements in low and medium strength concretes, Cem. Cconcrete Compos., 29(2), 136-145. https://doi.org/10.1016/j.cemconcomp.2006.10.005
  6. Hosseini, S.A. (2022), "Seawater curing effects on the permeability of concrete containing fly ash", Adv. Concrete Constr., Int. J., 14(3), 205-214. https://doi.org/10.12989/acc.2022.14.3.205
  7. Hussain, S.E., Rasheeduzzafar., Al-Musallam, A. and Al-Gahtani, A.S. (1995), "Factors affecting threshold chloride for reinforcement corrosion in concrete", Cem. Concrete Res., 25(7), 1543-1555. https://doi.org/10.1016/0008-8846(95)00148-6
  8. Ishida, T. and Maekawa, K. (2003), "Modeling of durability performance of cementitious materials and structures based on thermo-hygro physics", Proceedings of the 2nd International RILEM Workshop on Life Prediction and Aging Management of Concrete Structures, Paris, France, January.
  9. Jang, S.Y., Karthick, S. and Kwon, S.J. (2017), "Investigation on durability performance in early aged high-performance concrete containing GGBFS and FA", Adv. Mater. Sci. Eng., 2017. https://doi.org/10.1155/2017/3214696
  10. JSCE (2002), Proposal of the Format for Durability Database of Concrete Japan Society of Civil Engineering - Concrete Library 109, Tokyo, Japan.
  11. JSCE (2007), Standard Specification for Concrete Structures-Design, JSCE- Guidelines for Concrete 15, Japan Society of Civil Engineering, Tokyo, Japan.
  12. Jung, W.Y., Yoon, Y.S. and Sohn, Y.M. (2003), "Predicting the remaining service life of land concrete by steel corrosion", Cem. Concrete Res., 33(5), 663-677. https://doi.org/10.1016/S0008-8846(02)01034-7
  13. KDS 14 20 40 (2016), Durability Design Code for Reinforced Concrete, Korea Construction Standard Center, Seoul, Republic of Korea.
  14. Kurbetci, S., Nas, M. and Sahin, M. (2022), "Durability properties of mortars with fly ash containing recycled aggregates", Adv. Concrete Constr., Int. J., 13(1), 101-111. https://doi.org/10.12989/acc.2022.13.1.101
  15. Maekawa, K., Ishida, T. and Kishi, T. (2009), Multi-Scale Modeling of Structural Concrete, Taylor & Francis, London.
  16. Maheswaran, J., Chellapandian, M. and Kumar, V. (2022), "Behavior of GGBS concrete with pond ash as a partial replacement for sand", Adv. Concrete Constr., Int. J., 13(3), 233-242. https://doi.org/10.12989/acc.2022.13.3.233
  17. Mawlood, B.O., Mohammad, A.H. and Bzeni, D.K. (2022), "Bond strength of deformed steel bars embedded in geopolymer concrete", Adv. Concrete Constr., Int. J., 14(5), 331-339. https://doi.org/10.12989/acc.2022.14.5.331
  18. Mustafa, M.A. and Yusof, K.M. (1994), "Atmospheric chloride penetration into concrete in semitropical marine environment", Cem. Concrete Res., 24(4), 661-670. https://doi.org/10.1016/0008-8846(94)90190-2
  19. Nilsson, L.O., Poulsen, E., Sandberg, P., Sorensen, H.E. and Klinghoffer, O. (1996), HETEK, Chloride penetration into concrete, State-of-the-Art, Transport processes, corrosion initiation, test methods and prediction models, Road Directorate, Denmark.
  20. Padilla, V., Ghods, P. and Alfantazi, A. (2013), "Effect of de-icing salts on the corrosion performance of galvanized steel in sulphate contaminated soil", Constr. Build. Mater., 40(2013), 908-918. https://doi.org/10.1016/j.conbuildmat.2012.09.077
  21. Park, S.S., Kwon, S.J. and Jung, S.H. (2012), "Analysis technique for chloride penetration in cracked concrete using equivalent diffusion and permeation", Constr. Build. Mater., 29(2012), 183-192. https://doi.org/10.1016/j.conbuildmat.2011.09.019
  22. Poulsen, E. (1993), On a Model of Chloride Ingress into Concrete, Department of Building Materials, Chalmers University of Technology, Gothenburg, Sweden.
  23. Roy, S.K., Chye, L.K. and Northwood, D.O. (1993), "Chloride ingress in concrete as measured by field exposure tests in the atmospheric, tidal and submerged zones of a tropical marine environment", Cem. Concrete Res., 23(6), 1289-1306. https://doi.org/10.1016/0008-8846(93)90067-J
  24. Saetta, A.V., Scotta, R.V. and Vitaliani, R.V. (1993), "Analysis of chloride diffusion into partially saturated concrete", Mater. J., 90(5), 441-451. https://doi.org/10.14359/3874
  25. Thomas, M. (1996), "Chloride thresholds in marine concrete", Cem. Concrete Res., 26(4), 513-519. https://doi.org/10.1016/0008-8846(96)00035-X
  26. Thomas, M.D.A. and Bamforth, P.B. (1999), "Modelling chloride diffusion in concrete: Effect of fly ash and slag", Cem. Concrete Res., 29(4), 487-495. https://doi.org/10.1016/S0008-8846(98)00192-6
  27. Thomas, M.D.A. and Bentz, E.C. (2002), Computer Program for Predicting the Service Life and Life-Cycle Costs of Reinforced Concrete Exposed to Chlorides-Life365 Manual, Silica Fume Association (SFA), Lovettsville, VA, USA.
  28. Tuutti, K. (1982), Corrosion of Steel in Concrete, Cement-och betonginst, Stockholm.
  29. Uji, K., Matsuoka, Y. and Maruya, T. (1990), "Formulation of an equation for surface chloride content of concrete due to permeation of chloride", In: The 3rd International Symposium on Corrosion of Reinforcement in Concrete Construction, Warwickshire, May.
  30. Wu, J. and Cui, Y. (2023), "Improving the concrete quality and controlling corrosion of rebar embedded in concrete via the synthesis of titanium oxide and silica nanoparticles", Adv. Concrete Constr., Int. J., 15(1), 1-10. https://doi.org/10.12989/acc.2023.15.1.001
  31. Yang, I.H., Yoon, Y.S. and Kwon, S.J. (2020), "Chloride penetration in anchorage concrete of suspension bridge during construction stage", Adv. Concrete Constr., Int. J., 10(1), 13-20. https://doi.org/10.12989/acc.2020.10.1.013
  32. Yoon, Y.S., Lee, J.S., Min, J.Y. and Kwon, S.J. (2022), "Behavior of apparent chloride diffusion coefficient of fly ash concrete under long-term marine exposure", Adv. Concrete Constr., Int. J., 14(6), 369-380. https://doi.org/10.12989/acc.2022.14.6.369
  33. Zhang, Z., Cai, Z., Mohammed, K.J. and Ali, H.E. (2023), "Anticorrosion impact of green synthesis of Silica nanoparticles for the sports structures in physical exercise activities", Adv. Concrete Constr., Int. J., 15(1), 41-46. https://doi.org/10.12989/acc.2023.15.1.041