Advances in concrete construction

  • 제16권2호
  • /
  • Pages.79-89
  • /
  • 2023
  • /
  • 2287-5301(pISSN)
  • /
  • 2287-531X(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

An innovative geometry control method for short-line match precast segmental bridges

  • Xuzheng Liu (School of Civil Engineer and Architecture, East China Jiaotong University) ;
  • Huibing Xu (China Railway Nanchang Group Co.,Ltd.) ;
  • Jianyang Yu (School of Civil Engineer and Architecture, East China Jiaotong University) ;
  • Wei Quan (School of Civil Engineer and Architecture, Huangshan University)
  • 투고 : 2021.07.13
  • 심사 : 2023.10.24
  • 발행 : 2023.08.25
⟨ 이전 논문 다음 논문 ⟩

초록

The occurrence of unexpected horizontal offset in the instrument or target will result in accumulated horizontal deviation in segment alignment with traditional short-line match method. A geometry control method, the four-point method, is developed for precast segmental bridges to avoid the influences of unexpected horizontal offset. The concept of the four-point method is elucidated. Furthermore, the detailed instruments and instructions are introduced. Finally, the four-point method is validated through a practical engineering application. According to the survey data, after short-line match precast construction, the vertical deviations on both sides vary between -5 mm and 5 mm in almost all segments, and the horizontal deviations vary between -4 mm and 4 mm in all segments. Without on-site adjustment, the maximum vertical and horizontal closure gaps are 12.3 and 26.1 mm, respectively. The four-point method is suggested to alleviate the issues associated with relatively poor soil conditions in casting yard.

키워드

과제정보

The authors would like to thank the Zhejiang Communications Investment Group Co., Ltd, which provided engineering background and supported this study. Additionally, the authors would like to extend our thanks to the China Research Institute of Highway Ministry of Transport and the CCCC First Highway Engineering Co., Ltd. The Project supported by the National Natural Science Foundation of China (Grant No. 51468019, 52068026), Natural Science Foundation of Jiangxi, China (Grant No. 20232BAB204070, 20232BAB204071) and the China Scholarship Council (Grant No. 201609795003).

참고문헌

  1. AASHTO GSCB-2-1999 (1999), Guide specifications for design and construction of segmental concrete bridges; American Association of State Highway and Transportation Officials, Washington, DC, USA.
  2. Babanagar, N., Mahalingam, A., Varghese, K. and Sahadevan, V. (2023), "Geometric control of short-line match casting using computational BIM", Proceedings of the 40th International Symposiumon on Automation and Robotics in Construction, Chennai, India, July.
  3. Barker, J.M. (1980), Construction techniques for segmental concrete bridges", PCI J., 25(4), 66-86. https://doi.org/10.15554/PCIJ.07011980.66.86
  4. Bender, B.F. and Janssen, H.H. (1982), "Geometry control of precast segmental concrete bridges", PCI J., 27(4), 72-86. https://doi.org/10.15554/PCIJ.07011982.72.86
  5. Bien, J. (2011), "Modelling of structure geometry in Bridge Management Systems", Arch. Civil Mech. Eng., 11(3), 519-532. https://doi.org/10.1016/S1644-9665(12)60099-5
  6. Bridges, C.P. and Coulter, C.S. (1979), "Geometry control for intercity bridge", PCI J., 25(3), 122-125. https://doi.org/10.15554/PCIJ.05011979.113.125
  7. Bu, Z.Y. and Ou, Y.C. (2013), "Simplified analytical pushover method for precast segmental concrete bridge columns", Adv. Struct. Eng., 16(5), 805-822. https://doi.org/10.1260/1369-4332.16.5.805
  8. Cheng, Y., Lin, F., Wang, W. and Zhang, J. (2022), "Vision-based trajectory monitoring for assembly alignment of precast concrete bridge components", Automat. Constr., 140, 104350. https://doi.org/10.1016/j.autcon.2022.104350
  9. Huang, Y., Zheng, H.H., Wang, M. and Wu, X.F. (2013), "Geometry control technology of transition curve section in cross-sea bridge erected by precasting segment girder", Appl. Mech. Mater., 256-259, 1548-1553. https://doi.org/10.4028/www.scientific.net/AMM.256-259.1548
  10. Jia, B., Yang, Y., Xie, B. and Yu, X. (2021), "Novel geometric control technology for precast segmental bridges", J. Constr. Eng. Manage., 147(4), 04021006. https://doi.org/10.1061/(ASCE)CO.1943-7862.0002006
  11. Kumar, K., Varghese, K., Nathan, K.S. and Ananthanarayanan, K. (2008), "Automated geometry control of precast segmental bridges", Proceedings of the 25th International Symposiumon on Automation and Robotics in Construction, Vilnius, Lithuania, June.
  12. Loper, J.H., Marquis, E.L. and Rhomberg, E.J. (1988), "Precast prestressed long-span bridges", J. Constr. Eng. M ASCE, 114(1), 95-103. https://doi.org/10.1061/(ASCE)0733-9364(1988)114:1(95)
  13. Megally, S., Veletzos, M.J., Burnell, K., Restrepo, J.I. and Seible, F. (2009), "Seismic performance of precast concrete segmental bridges: Summary of experimental research on segment-to-segment joints", J. Prestressed Concr. Inst., 54(2), 116-142. https://doi.org/10.15554/pcij.03012009.116.142
  14. Mondorf, P.E., Kuprenas, J.A. and Kordahi, E.N. (1997), "Segmental cantilever bridge construction case study", J. Constr. Eng. M ASCE, 123(1), 79-84. https://doi.org/10.1061/(ASCE)0733-9364(1997)123:1(79)
  15. Puri, N. and Turkan, Y. (2020), "Bridge construction progress monitoring using lidar and 4D design models", Automat. Constr., 109, 102961. https://doi.org/10.1016/j.autcon.2019.102961
  16. Qi, T., Yuan, Q., Guan, J., Liu, D. and Wang, X. (2020), "Research on control of precast alignment of short-line method precast segmental concrete bridges based on the theory of four-point distance", In: IOP Conference Series: Earth and Environmental Science, Vol. 510, No. 5, p. 052071. https://doi.org/10.1088/1755-1315/510/5/052071
  17. Ramos, G. and Aparicio, A.C. (1996), "Ultimate analysis of monolithic and segmental externally prestressed concrete bridges", J. Bridge Eng., 1(1), 10-17. https://doi.org/10.1061/(ASCE)1084-0702(1996)1:1(10)
  18. Roberts, C.L., Arrellaga, J.A. and Breen, J.E. (1991), "Instrumentation of segmental box girder bridges and multipiece winged boxes", Texas Department of Transportation, Project No.3-5-90-1234.
  19. Roberts, C.L., Breen, J.E. and Kerger, M.E. (1993), "Measurement based revisions for segmental bridge design and construction criteria", Texas Department of Transportation; Report No.1234-3F.
  20. Rostam, S. (2005), "Design and construction of segmental concrete bridges for service life of 100 to 150 years", ASBI Convention, Washington DC, USA.
  21. Tang, M.C. (2015), "Segmental bridges in chongqing, China", J. Bridge Eng., 20(8), B4015001. https://doi.org/10.1061/(ASCE)BE.1943-5592.0000696
  22. Tang, F.F. (2000), "Overlay for concrete segmental box-girder bridges", J. Bridge Eng., 5(4), 311-321. https://doi.org/10.1061/(ASCE)1084-0702(2000)5:4(311)
  23. Turmo, J., Ramos, G. and Aparicio, A.C. (2005), "FEM study on the structural behaviour of segmental concrete bridges with unbonded prestressing and dry joints: Simply supported bridges", Eng. Struct., 27(11), 1652-1661. https://doi.org/10.1016/j.engstruct.2005.04.011
  24. Veletzos, M.J. and Restrepo, J.I. (2014), "Equivalent unbonded length for modeling of multistrand tendons in precast segmental construction", J. Bridge Eng., 19(1), 101-109. https://doi.org/10.1061/(ASCE)BE.1943-5592.0000502
  25. Wang, H., Tao, T., Li, A. and Zhang, Y. (2016), "Structural health monitoring system for Sutong cable-stayed bridge", Smart Struct. Syst., Int. J., 18(2), 317-334. https://doi.org/10.12989/SSS.2016.18.2.317
  26. Wang, Q., Sohn, H. and Cheng, J.C. (2018), "Automatic as-built BIM creation of precast concrete bridge deck panels using laser scan data", J. Comput. Civil Eng., 32(3), 04018011. https://doi.org/10.1061/(ASCE)CP.1943-5487.0000754
  27. Wu, J., Frangopol, D.M. and Soliman, M. (2015), "Geometry control simulation for long-span steel cable-stayed bridges based on geometrically nonlinear analysis", Eng. Struct., 90, 71-82. https://doi.org/10.1016/j.engstruct.2015.02.007
  28. Yu, J.Y. (2016), "Research on key technologies in construction monitoring of short-line precast segmental cantilever erection bridge", M.Sc. Thesis; East China Jiaotong University, Jiangxi, China. [in Chinese]
  29. Yuen, T.Y., Halder, R., Chen, W.W., Zhou, X., Deb, T., Liu, Y., Tseng, Y. and Wen, T.H. (2020), "DFEM of a post-tensioned precast concrete segmental bridge with unbonded external tendons subjected to prestress changes", Structures, 28, 1322-1337. https://doi.org/10.1016/j.istruc.2020.09.080
  30. Zhou, L.Y. and Zheng, H. (2016), "Matching error adjustment of girder segments precast by short-line match based on coordinate transformation", China Bridge Constr., 46(5), 71-76. [in Chinese]