DOI QR코드

DOI QR Code

Seismic behavior of reinforced concrete column-steel beam joints with and without reinforced concrete slab

  • Tong Li (College of Civil Engineering, Xi'an University of Architecture & Technology) ;
  • Jinjie Men (College of Civil Engineering, Xi'an University of Architecture & Technology) ;
  • Huan Li (College of Civil Engineering, Xi'an University of Architecture & Technology) ;
  • Liquan Xiong (College of Civil Engineering, Xi'an University of Architecture & Technology)
  • 투고 : 2022.06.26
  • 심사 : 2023.03.31
  • 발행 : 2023.05.10

초록

As the key part in the reinforced concrete column-steel beam (RCS) frame, the beam-column joints are usually subjected the axial force, shear force and bending moment under seismic actions. With the aim to study the seismic behavior of RCS joints with and without RC slab, the quasi-static cyclic tests results, including hysteretic curves, slab crack development, failure mode, strain distributions, etc. were discussed in detail. It is shown that the composite action between steel beam and RC slab can significantly enhance the initial stiffness and loading capacity, but lead to a changing of the failure mode from beam flexural failure to the joint shear failure. Based on the analysis of shear failure mechanism, the calculation formula accounting for the influence of RC slab was proposed to estimate shear strength of RCS joint. In addition, the finite element model (FEM) was developed by ABAQUS and a series of parametric analysis model with RC slab was conducted to investigate the influence of the face plates thickness, slab reinforcement diameter, beam web strength and inner concrete strength on the shear strength of joints. Finally, the proposed formula in this paper is verified by the experiment and FEM parametric analysis results.

키워드

과제정보

The research described in this paper was financially supported by the Natural Science Foundation (Grant No. 51878542 and No. 52178160) and the National Key R&D Program of China (Grant No.2019YFE0112900).

참고문헌

  1. Chen, Z.P., Xu, D.Y. and Xu, J.J. (2021), "Seismic behavior and strength of L-shaped steel reinforced concrete column-concrete beam planar and spatial joints", Steel. Compos. Struct., 39(3), 337-352. https://doi.org/10.12989/scs.2021.39.3.337.
  2. Cheng, C.T. and Chen, C.C. (2005), "Seismic behavior of steel beam and reinforced concrete column connections", J. Constr. Steel Res., 61(5), 587-606. https://doi.org/10.1016/j.jcsr.2004.09.003.
  3. Cheng, C.T., Chan, C.F. and Chung, L.L. (2007), "Seismic behavior of steel beams and CFT column moment-resisting connections with floor slabs", J. Constr. Steel Res., 61(11), 1479-1493. https://doi.org/10.1016/j.jcsr.2007.01.014.
  4. CMC (2010), Code for Design of Concrete Structures, GB 50010-2010, China Ministry of Construction, Beijing,
  5. CMC (2010a), Code for Seismic Design of Buildings, GB 50011-2010, China Ministry of Construction, Beijing,
  6. CMC (2017), Code for Design of Building Steel Structures, GB 50011-2017, China Ministry of Construction, Beijing,
  7. Deierlein, G.G., Sheikh, T.M., Yura, J.A. and Jirsa, J.O. (1989), "Beam-column moment connections for composite frames: Part 2", J. Struct. Eng., 115(11), 2877-2896. https://doi.org/10.1061/(ASCE)0733-9445(1989)115:11(2877).
  8. Feng, P., Cheng, S., Bai, Y. and Ye, L. (2015), "Mechanical behavior of concrete-filled square steel tube with FRP-confined concrete core subjected to axial compression", Compos. Struct., 123, 312-324. https://doi.org/10.1016/j.compstruct.2014.12.053.
  9. Fukumoto, T. and Morita, K. (2005), "Elastoplastic behavior of panel zone in steel beam-to-concrete filled steel tube column moment connections", J. Struct. Eng., 131(12), 1841-1853. https://doi.org/10.1061/(ASCE)0733-9445(2005)131:12(1841).
  10. Hwang, S.J. and Lee, H.J. (2002), "Strength prediction for discontinuity regions by softened strut-and-tie model", J. Struct. Eng., 128(12), 1519-1526. https://doi.org/10.1061/(ASCE)0733-9445(2002)128:12(1519).
  11. Jones, S.L., Fry, G.T. and Engelhardt, M.D. (2002), "Experimental evaluation of cyclically loaded reduced beam section moment connections", J. Struct. Eng., 128(4), 441-451. https://doi.org/10.1061/(ASCE)0733-9445(2002)128:4(441).
  12. Kuramoto, H. and Nishiyama, I. (2004), "Seismic performance and stress transferring mechanism of through-column-type joints for composite reinforced concrete and steel frames", J. Struct. Eng., 130(2), 352-360. https://doi.org/10.1061/(ASCE)0733-9445(2004)130:2(352).
  13. Li, X. (2009), "Seismic behavior of bolted end-plate connections for composite steel and concrete structures", PhD Dissertation, Hunan University, Changsha,
  14. Men, J.J., Guo, Z.F. and Shi, Q.X. (2015), "Experimental research on seismic behavior of novel composite RCS joints", Steel Compos. Struct., 19(1), 209-221. https://doi.org/10.12989/scs.2015.19.1.209.
  15. Men, J.J., Xiong, L.Q., Wang, J.S. and Fan, G.L. (2021), "Effect of different RC slab widths on the behavior of reinforced concrete column and steel beam-slab subassemblies", Eng. Struct., 229(2), 111639. https://doi.org/10.1016/j.engstruct.2020.111639.
  16. Michael, N.B., Joseph, M.B. and Walter PM. (2000), "Seismic behavior of composite RCS frame systems", J. Struct. Eng., 126(4), 429-436. https://doi.org/10.1061/(ASCE)0733-9445(2000)126:4(429).
  17. Michael, N.B., Joseph, M.B. and Walter, P.M. (2000), "Seismic behavior of composite RCS frame systems", J. Struct. Eng., 126(4), 429-436. https://doi.org/10.1061/(ASCE)0733-9445(2000)126:4(429).
  18. Nakashima, M., Matsumiya, T. and Suita, K. (2007), "Full-scale test of composite frame under large cyclic loading", J. Struct. Eng., 133(2), 297-304. https://doi.org/10.1061/(ASCE)0733-9445(2007)133:2 (297).
  19. Nie, J., Yuan, H., Yi, W. and Fan, J. (2012), "Seismic behavior of CFRSTC composite frames considering slab effects", J. Constr. Steel Res., 68(1), 165-175. https://doi.org/10.116/j.jcsr.2011.08.006.
  20. Nie, J.G., Qin, K. and Cai, C.S. (2008), "Seismic behavior of connections composed of CFSSTCs and steel-concrete composite beams: Finite element analysis", J. Constr. Steel Res., 64(6), 680-688. https://doi.org/10.1016/j.jcsr.2007.12.003.
  21. Nishiyama, I., Fujimoto, T., Fukumoto, T. and Yoshioka, K. (2004), "Inelastic force-deformation response of joint shear panels in beam-column moment connections to concrete-filled tubes", J. Struct. Eng., 130(2), 244-252. https://doi.org/10.1061/(ASCE)0733-9445(2004)130:2(244).
  22. Paulay, T. and Priestley, M. (1992), Seismic Design of Reinforced Concrete and Masonry Buildings, Wiley, New Jersey, USA.
  23. Sheikh, T.M., Deierlein, G.G., Yura. J.A. and Jirsa, J.O. (1989), "Beam-column moment connections for composite frames: Part 1", J. Struct. Eng., 115(11), 2858-2876. https://doi.org/10.1061/(ASCE)0733-9445(1989)115:11(2858).
  24. Silva, L.S., Simoes, R.D. and Cruz, P.J.S. (2001), "Experimental behaviour of end-plate beam-to-column composite joints under monotonical loading", Eng. Struct., 23(11), 1383-1409. https://doi.org/10.1016/S0141-0296(01)00054-2.
  25. Tao, M.X., Fan, J.S. and Nie, J.G. (2013), "Seismic behavior of steel reinforced concrete column-steel truss beam hybrid joints", Eng. Struct., 56(6), 1557-1569. http://doi.org/10.1016/j.engstruct.2013.07.029.
  26. Wu, C.L., Liu, J.M., Tan, W.Y. and Wang P.F. (2020), "Seismic behavior of composite interior joints of prefabricated H-shaped steel reinforced concrete column-steel beam", Struct., 23, 558-572. https://doi.org/10.1016/j.istruc.2019.11.008.
  27. WU, L (2016), "Shear bearing capacity tests and computing method study of diaphragm-through connection of CFRT", PhD Dissertation, Tianjin University, Tianjin,
  28. Xing, G.H., Liu, B.Q. and Wu, T. (2011), "Shear strength of reinforced concrete frame joints using softened strut and tie model", J. Build. Struct., 32(05), 125-134. (in Chinese) https://doi.org/10.14006/j.jzjgxb.2011.05.017.
  29. Xiong, L.Q., Men, J.J., Ren, R.Y. and Lei, M.K. (2018), "Experimental investigation on the seismic behavior of reinforced concrete column-steel beam subassemblies", Steel Compos. Struct., 28(4), 471-482. https://doi.org/10.1016/j.engstruct.2020.111639.
  30. Zhao, H., Tao, M.X. and Ding, R. (2020), "Experimental study on seismic behaviour of composite frames with wide floor slabs considering the effect of floor loads", Eng. Struct., 220(8), 111024. https://doi.org/10.1016/j.engstruct.2020.111024.
  31. Zhou, H. (2011), "Experimental and theoretical study on 3D composite joints under bidirectional loading", Master's Dissertation, Tsinghua University, Beijing, China.