Structural Engineering and Mechanics

  • 제86권3호
  • /
  • Pages.385-397
  • /
  • 2023
  • /
  • 1225-4568(pISSN)
  • /
  • 1598-6217(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Comparative experimental study on seismic retrofitting methods for full-scale interior reinforced concrete frame joints

  • Yang Chen (Department of Civil Engineering, Shanghai University) ;
  • Xiaofang Song (Department of Geological Engineering and Resource Exploration, Henan Geology and Mining Vocational College) ;
  • Yingjun Gan (School of Digital Construction, Shanghai Urban Construction Vocational College) ;
  • Chong Ren (Department of Civil Engineering, Shanghai University)
  • 투고 : 2022.04.07
  • 심사 : 2023.03.30
  • 발행 : 2023.05.10
⟨ 이전 논문 다음 논문 ⟩

초록

This study presents an experiment and analysis to compare the seismic behavior of full-scale reinforced concrete beam-column joint strengthened by prestressed steel strips, externally bonded steel plate, and CFRP sheets. For experimental investigation, five specimens, including one joint without any retrofitting, one joint retrofitted by externally bonded steel plate, one joint retrofitted by CFRP sheets, and two joints retrofitted by prestressed steel strips, were tested under cyclic-reserve loading. The failure mode, strain response, shear deformation, hysteresis behavior, energy dissipation capacity, stiffness degradation and damage indexes of all specimens were analyzed according to experimental study. It was found that prestressed steel strips, steel plate and CFRP sheets improved shear resistance, energy dissipation capacity, stiffness degradation behavior and reduced the shear deformation of the joint core area, as well as changed the failure pattern of the specimen, which led to the failure mode changed from the combination of flexural failure of beams and shear failure of joints core to the flexural failure of beams. In addition, the beam-column joint retrofitted by steel plate exhibited a high bearing capacity, energy consumption capacity and low damage index compared with the joint strengthened by prestressed steel strip, and the prestressed steel strips reinforced joint showed a high strength, energy dissipation capacity and low shear deformation, stirrups strains and damage index compared to the CFRP reinforced joint, which indicated that the frame joints strengthened with steel plate exhibited the most excellent seismic behavior, followed by the prestressed steel strips.

키워드

과제정보

The experiments were sponsored by the National Natural Science Foundation of China (Program No. 52108156), the Opening Fund of State Key Laboratory of Green Building in Western China (Project No. LSKF202215) and also supported by Shanghai University, Xi'an University of Architecture & Technology and Henan Geology and Mining Vocational College.

참고문헌

  1. Alemdar, F. and Sezen H. (2010), "Shear behavior of exterior reinforced concrete beam-column joints", Struct. Eng. Mech., 35(1), 123-126. https://doi.org/10.12989/sem.2010.35.1.123.
  2. Atea, S.R. (2018), "A case study of flexural performance of reinforced concrete beams bonded with steel plates with different thickness", J. Mater. Res. Tech., 8(1), 22-32. https://doi.org/10.1016/j.jmrt.2017.10.006.
  3. Azariani, H.R., Reza Esfahani, M. and Shariatmadar, H. (2018), "Behavior of exterior concrete beam-column joints reinforced with Shape Memory Alloy (SMA) bars", Steel Compos. Struct., 28(1), 83-98. https://doi.org/10.12989/scs.2018.28.1.083.
  4. Dogangun, A. (2004), "Performance of reinforced concrete building during the May 1, 2003 Bingol Earthquake in Turkey", Eng. Struct., 26(6), 841-856. https://doi.org/10.1016/j.engstruct.2004.02.005.
  5. Fardis, M.N. and Biskinis, D.E. (2003), "Performance-based engineering for earthquake resistant reinforced concrete structures: A volume Honoring Shunsuke Otani", Deformation Capacity of RC Members, as Controlled by Flexure or Shear, University of Tokyo, Tokyo.
  6. Golias, E., Zapris, A.G., Kytinou, V.K., Kalogeropoulos, G.I., Chalioris, C.E. and Karayannis, C.G. (2021), "Effectiveness of the novel rehabilitation method of seismically damaged RC joints using C-FRP ropes and comparison with widely applied method using C-FRP sheets-Experimental investigation", Sustain., 13, 6454. https://doi.org/10.3390/su13116454.
  7. Golias, E., Zapris, A.G., Kytinou, V.K., Osman, M., Koumtzis, M., Siapera, D., ... & Karayannis, C.G. (2021), "Application of X-Shaped CFRP ropes for structural upgrading of reinforced concrete beam-column joints under cyclic loading-Experimental study", Fiber., 9(7), 42. https://doi.org/10.3390/fib9070042.
  8. Guo, R.H. (2011), "The reliability of enlarging the cross-section in reinforcing the frame construction buildings", Adv. Mater. Res., 189-193, 4365-4369. https://doi.org/10.4028/www.scientific.net/AMR.189-193.4365.
  9. Han, C., Li, Q.N., Wang, X., Jiang, W.S. and Li, W. (2016), "Research on rotation capacity of the new precast concrete assemble beam column joints", Steel Compos. Struct., 22(3), 613-625. https://doi.org/10.12989/scs.2016.22.3.613.
  10. Huang, J.F., Zhu, C, Gong, Z.G. and Zhang, F.W. (2012), "Experimental study on seismic behavior of earthquake-damaged RC frame strengthened by enlarging cross-section", Chin. Civil Eng. J., 45(12), 9-17. (in Chinese)
  11. Huang, Q.X., Guo, Z.X., Cui, J. and Liu, Y. (2015), "Experimental study on seismic behavior of RC frame joints strengthened with prestressed steel wire rope", Chin Civil Eng. J., 48(6), 1-8. (in Chinese)
  12. Jahami, A., Timsah, Y., Khatib, J.M., Baalbaki, O. and Kenai, S. (2021), "The behavior of CFRP strengthened RC beams subjected to blast loading", Mag. Civil Eng., 103(3), 10309-10309. https://doi.org/10.34910/MCE.103.9.
  13. Jumaat, M.Z. and Alam, A. (2008), "Experimental and analytical investigations on the structural behaviour of steel plate and CFRP laminate flexurally strengthened reinforced concrete beams", J. Appl. Sci., 8(23), 4383-4389. https://doi.org/10.3923/jas.2008.4383.4389.
  14. Karayannis, C.G. and Golias, E. (2022), "Full-scale experimental testing of RC beam-column joints strengthened using CFRP ropes as external reinforcement", Eng. Struct., 250, 113305. https://doi.org/10.1016/j.engstruct.2021.113305.
  15. Karayannis, C.G., Chalioris, C.E. and Sirkelis, G.M. (2008), "Local retrofit of exterior RC beam-column joints using thin RC jackets-an experimental study", Earthq. Eng. Struct. Dyn., 37(5), 727-746. https://doi.org/10.1002/eqe.783.
  16. Lee, W.T., Chiou, Y.J. and Shih, M.H. (2010), "Reinforced concrete beam-column joint strengthened with carbon fiber reinforced polymer", Compos. Struct., 92(1), 48-60. https://doi.org/10.1016/j.compstruct.2009.06.011.
  17. Lha, B., Yw, C., Peng, F.B., Htw, D. and Hqb, E. (2021), "Debonding development in cracked steel plates strengthened by CFRP laminates under fatigue loading: Experimental and boundary element method analysis", Thin Wall Struct., 166, 108038. https://doi.org/10.1016/j.tws.2021.108038.
  18. Li, B. and Kai, Q. (2011), "Seismic behavior of reinforced concrete interior beam-wide column joints repaired using FRP", J. Compos. Constr., 15(3), 327-338. https://doi.org/10.1061/(ASCE)CC.1943-5614.0000163.
  19. Liu, R.Y. and Yang, Y. (2019), "Analysis on damage of RC frames retrofitted with buckling-restrained braces based on estimation of damage index", Struct. Eng. Mech., 70(6), 781-791. https://doi.org/10.12989/sem.2019.70.6.781.
  20. Mander, J.B., Priestley, M.J.N. and Park, R. (1988), "Theoretical stress-strain model for confined concrete", J. Struct. Eng., 114(8), 1804-1826. https://doi.org/10.1061/(ASCE)0733-9445(1988)114:8(1804).
  21. Mazaheripour, H., Barros, J.A.O., Soltanzadeh, F. and Sena-Cruz, J. (2016), "Deflection and cracking behavior of SFRSCC beams reinforced with hybrid prestressed GFRP and steel reinforcements", Eng. Struct., 125, 546-565. https://doi.org/10.1016/j.engstruct.2016.07.026.
  22. Men, J.J., Zhang, Y.R., Guo, Z.F. and Shi, Q.X. (2015), "Experimental research on seismic behavior of a composite RCS frame", Steel Compos. Struct., 18(4), 971-983. https://doi.org/10.12989/scs.2015.18.4.971.
  23. Murad, Y.Z. and Alseid, B.H. (2021), "Retrofitting interior RC beam-to-column joints subjected to quasi-static loading using NSM CFRP ropes", Struct., 34, 4158-4168. https://doi.org/10.1016/j.istruc.2021.10.024.
  24. Obaidat, Y.T., Abu-Farsakh, G.A.F.R. and Ashteyat, A.M. (2018), "Retrofitting of partially damaged reinforced concrete beam-column joints using various plate-configurations of CFRP under cyclic loading", Constr. Build. Mater., 198, 313-322. https://doi.org/10.1016/j.conbuildmat.2018.11.267.
  25. Ostapiuk, M. and Bienia, J. (2020), "Fracture analysis and shear strength of aluminum/CFRP and GFRP adhesive joint in fiber metal laminates", Mater., 13(1), 7. https://doi.org/10.3390/ma13010007.
  26. Pantelides, C.P., Okahashi, Y. and Reaveley, L.D. (2008), "Seismic rehabilitation of reinforced concrete frame interior beam-column joints with FRP composites", J. Compos. Constr., 12(4), 435-445. https://doi.org/10.1061/(ASCE)1090-0268(2008)12:4(435).
  27. Park, Y.J. and Ang, H.S. (1985), "Mechanistic seismic damage model for reinforced concrete", J. Struct. Eng., 111(4), 722-739. https://doi.org/10.1061/(ASCE)0733-9445(1985)111:4(722).
  28. Qureshi, J. (2022), "A review of fibre reinforced polymer structures", Fiber., 10(3), 27. https://doi.org/10.3390/fib10030027.
  29. Shan, C.L. (2010), "Calculation method of bending crack width in RC beams strengthened by bonding steel plate", J. Southw. Jiaotong Univ., 45(4), 508-513. https://doi.org/10.3969/j.issn.0258-2724.2010.04.004.
  30. Tafsirojjaman, T., Fawzia, S. and Thambiratnam, D.P. (2021), "Structural behaviour of CFRP strengthened beam-column connections under monotonic and cyclic loading", Struct., 33(3), 2689-2699. https://doi.org/10.1016/j.istruc.2021.06.028.
  31. Thamrin, R. and Sari, R.P. (2017), "Flexural capacity of strengthened reinforced concrete beams with web bonded steel plates", Procedia Eng., 171, 1129-1136. https://doi.org/10.1016/j.proeng.2017.01.474.
  32. Wang, D.S., Si, B.J., Ai, Q.H. and Sun, Z.G. (2005), "A comparative study of modified Park-Ang model and Park-Ang model for structural seismic damage evaluation", Earthq. Resistant Eng. Retrof., 27(S1), 138-144.
  33. Wang, J., Lu, S. and Yang, J. (2020), "Behavior of eccentrically loaded rectangular RC columns wrapped with CFRP jackets under different preloading levels", J. Build Eng., 34, 101943. https://doi.org/10.1016/j.jobe.2020.101943.
  34. Wu, G., Jiang, J.B., Wu, Z.S., Tian, Y. and Zhang, M. (2010), "Experimental study of RC beams strengthened with distributed prestressed high-strength steel wire rope", Mag. Concrete Res., 62(4), 253-265. https://doi.org/10.1680/macr.2010.62.4.253.
  35. Yang, Y, Chen, Y., Chen, Z., Wang, N.N. and Yu, Y.L. (2018), "Experimental study on seismic behavior of RC beam-column joints retrofitted using prestressed steel strips", Earthq. Struct., 15(5), 499-511. https://doi.org/10.12989/eas.2018.15.5.499.
  36. Yi, X.R., Liu, Y.Q. and Yang, X.Z. (2006), "Application and testing research of prestressed hoop strengthening chimney", J. Wuhan Univ. Tech., 28(12), 106-100. https://doi.org/10.1016/S1872-1508(06)60035-1.
  37. Zhang, B., Yang, Y., Wei, Y.F., Liu, R.Y., Ding, C. and Zhang, K.Q. (2015), "Experimental study on seismic behavior of reinforced concrete column retrofitted with prestressed steel strips", Struct. Eng. Mech., 55(6), 1139-1155. https://doi.org/10.12989/sem.2015.55.6.1139.
  38. Zhao, B., Taucer, F. and Rossetto, T. (2009), "Field investigation on the performance of building structures during the 12 May 2008 Wenchuan earthquake in China", Eng. Struct., 31(8), 1707-1723. https://doi.org/10.1016/j.engstruct.2009.02.039.