한국분말재료학회지 (Journal of Powder Materials)

  • 제30권2호
  • /
  • Pages.116-122
  • /
  • 2023
  • /
  • 2799-8525(pISSN)
  • /
  • 2799-8681(eISSN)
한국분말재료학회 (*구 분말야금학회) (The Korean Powder Metallurgy & Materials Institute)
권호 표지
DOI QR코드

DOI QR Code

L-PBF 공정으로 제조된 Nd-Fe-B계 영구자석의 기판 가열에 따른 미세조직과 자기적 특성 변화

Effect of Substrate Pre-heating on Microstructure and Magnetic Properties of Nd-Fe-B Permanent Magnet Manufactured by L-PBF

  • Yeon Woo Kim (Korea Institute of Materials Science (KIMS)) ;
  • Haeum Park (Korea Institute of Materials Science (KIMS)) ;
  • Tae-Hoon Kim (Korea Institute of Materials Science (KIMS)) ;
  • Kyung Tae Kim (Korea Institute of Materials Science (KIMS)) ;
  • Ji-Hun Yu (Korea Institute of Materials Science (KIMS)) ;
  • Yoon Suk Choi (Department of Materials Science and Engineering, Pusan National University) ;
  • Jeong Min Park (Korea Institute of Materials Science (KIMS))
  • 투고 : 2023.03.31
  • 심사 : 2023.04.27
  • 발행 : 2023.04.28
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

Because magnets fabricated using Nd-Fe-B exhibit excellent magnetic properties, this novel material is used in various high-tech industries. However, because of the brittleness and low formability of Nd-Fe-B magnets, the design freedom of shapes for improving the performance is limited based on conventional tooling and postprocessing. Laser-powder bed fusion (L-PBF), the most famous additive manufacturing (AM) technique, has recently emerged as a novel process for producing geometrically complex shapes of Nd-Fe-B parts owing to its high precision and good spatial resolution. However, because of the repeated thermal shock applied to the materials during L-PBF, it is difficult to fabricate a dense Nd-Fe-B magnet. In this study, a high-density (>96%) Nd-Fe-B magnet is successfully fabricated by minimizing the thermal residual stress caused by substrate heating during L-PBF.

키워드

과제정보

This work was supported by Basic Research Program (Development of Magnetic Powders Specialized for 3D Printing for Next-generation High-efficiency Motors) of Korea Institute of Machinery and Materials (KIMM). This work was also supported by National Research Foundation of Korea (NRF) funded by Ministry of Science and ICT (grant number: 2021M3D1A2047724).

참고문헌

  1. M. Sagawa, S. Hirosawa, H. Yamamoto, S. Fujimura and Y.Matsuura: Jpn. J. Appl. Phys., 26 (1987) 785.
  2. K. Hono and H. Sepehri-Amin: Scr. Mater., 67 (2012) 530.
  3. K. Hono and H. Sepehri-Amin: Scr. Mater., 151 (2018) 6.
  4. O. Gutfleisch, M. A. Willard, E. Bruck, C. H. Chen, S. G. Sankar and J. P. Liu: Adv. Mater., 23 (2011) 821.
  5. Y. Matsuura: J. Magn. Magn. Mater., 303 (2006) 344.
  6. D. Brown, B. M. Ma and Z. Chen: J. Magn. Magn. Mater., 248 (2002) 432.
  7. T. S. Chin, M. P. Hung, D. S. Tsai, K. F. Wu and W. C. Chang: J. Appl. Phys., 64 (1988) 5531.
  8. G. Y. Kim, T. H. Kim, H. R. Cha, S. Lee, D. H. Kim, Y. D. Kim and J. G. Lee: Scr. Mater., 214 (2022) 114676.
  9. T. H. Kim, T. T. Sasaki, T. Koyama, Y. Fujikawa, M. Miwa, Y. Enokido, T. Ohkubo and K. Hono: Scr. Mater., 178 (2020) 433.
  10. H. R. Cha, G. Y. Kim, T. H. Kim, S. H. Lee, D. H. Kim and J. G. Lee: IEEE Trans. Magn., 58 (2022) 1. https://doi.org/10.7845/KJM.2022.2056
  11. Y. Yang, A. Walton, R. Sheridan, K. Guth, R. Gauss, O. Gutfleisch, M. Buchert, B. Steenari, T. V. Gerven, P. T. Jones and K. Binnemans: J. Sustain. Metall., 3 (2017) 122
  12. M. Yue, J. Zhang, Y. Xiao, G. Wang and T. Li: IEEE Trans. Magn., 39 (2003) 3551.
  13. Mechanical Industry Press, Beijing (1997).
  14. Y. M. Rabinovich, V. V. Sergeev, A. D. Maystrenko, V. Kulakovsky, S. Szymura and H. Bala: Intermetallics, 4 (1996) 641.
  15. T. D. Ngo, A. Kashani, G. Imbalzano, K. T. Q. Nguyen and D. Hui: Composites Part B, 143 (2018) 172.
  16. L. E. Murr, S. M. Gaytan, D. A. Ramirez, E. Martinez, J. Hernandez, K. N. Amato, P. W. Shindo, F. R. Medina and R. B. Wicker: J. Mater. Sci. Technol., 28 (2012) 1.
  17. D. D. Gu, W. Meiners and K. Wissenbach: Int. Mater. Rev., 57 (2012) 133.
  18. J. M. C. Kang, D. H. Ye and G. H. Go: J. Weld. Join., 34 (2016) 9.
  19. J. Choe, J. Yun, D. Y. Yang, S. Yang, J. H. Yu, C. W. Lee and Y. J. Kim: J. Powder Mater., 24 (2017) 187.
  20. J. M. P ark, J. M. Jeon, J. G. Kim, Y. Seong, S. H. P ark and H. S. Kim: J. Powder Mater., 25 (2018) 475.
  21. E. A. Perigo, J. Jacimovic, F. Graica Ferre and L. M. Scherf: Addit. Manuf., 30 (2019) 100870.
  22. J. F. Liu, P . Vora, M. H. Walmer and E. Kottcamp: J. Appl. Phys., 97 (2005) 10H101.
  23. F. Bittner, J. Thielsch, and W. G. Drossel: Prog. Addit. Manuf., 5 (2020) 3.
  24. P. Stief, J. Y. Dantan, A. Etienne and A. Siadat: Procedia CIRP, 70 (2018) 47.
  25. J. Wu, N. T. Aboulkhair, M. Degano, I. Ashcroft and R. J. M. Hague: Mater. Des., 209 (2021) 109992.
  26. ASTM B212-17, Standard Test Method for Apparent Density of Free-Flowing Metal Powders Using the Hall Flowmeter Funnel (West Conshohocken: ASTM International, 2021).
  27. ASTM B527-15, Standard Test Method for Tap Density of Metal Powders and Compounds (West Conshohocken: ASTM International, 2020).
  28. P. Mercelis and J. P. Kruth: Rapid Prototyp. J., 12 (2006) 254.
  29. F. Bittner, J. Thielsch and W. G. Drossel: Scr. Mater., 201 (2021) 113921.
  30. E. Ghio and E. Cerri: Materials, 15 (2022) 2047.
  31. G. M. Karthik and H. S. Kim: Met. Mater. Int., 27 (2021) 1.
  32. J. P. Kruth, L. Froyen, J. Van Vaerenbergh, P. Mercelis, M. Rombouts and B. Lauwers: J. Mater. Process. Technol., 149 (2004) 616.
  33. R. Mertens, S. Dadbakhsh, J. Van Humbeeck and J. P. Kruth: Procedia CIRP, 74 (2018) 5.
  34. K. Kempen, B. Vrancken, S. Buls, L. Thijs, J. V. Humbeeck and J. P. Kruth: J. Manuf. Sci. Eng., 136 (2014) 061026.
  35. J. Sander, J. Hufenbach, L. Giebeler, H. Wendrock, U. Kuhn and J. Eckert: Mater. Des., 89 (2016) 335.
  36. B. Vrancken, S. Buls, J. P. Kruth and J. V. Humbeeck: Preheating of Selective Laser Melted Ti6Al4V: Microstructure and Mechanical Properties. Proceedings of the 13th World Conference on Titanium, (2016) 1269.
  37. F. Huber, C. Bischof, O. Hentschel, J. Heberle, J. Zettl, K. Yu. Nagulin and M. Schmidt: Mater. Sci. Eng. A, 742 (2019) 109.
  38. C. Rong and B. Shen: Chin. Phys. B, 27 (2018) 117502.
  39. R. Ahuja, S. Auluck, B. Johansson and M. A. Khan: J. Magn. Magn, Mater., 140 (1995) 89.
  40. Q. Zhou, W. Li, Y. Hong, L. Zhao, X. Zhong, H. Yu, L. Huang and Z. Liu: J. Rare Earths, 36 (2018) 379.
  41. Y. Zhang, T. Ma, M. Yan, J. Jin, B. Wu, B. Peng, Y. Liu, M. Yue and C. Liu: Acta Mater., 146 (2018) 97.
  42. D. W. Shin, D. S. Kim, B. Madavali, D. H. Kim, J. G. Kim, C. H. Lee, S. Challapalli and S. J. Hong: J. Magn. Magn. Mater., 482 (2019) 280.