DOI QR코드

DOI QR Code

Preparation and Characterization of PBAT/OTPS Blend Films with Epoxidized Soybean Oil (ESO) for Eco-friendly Packaging Application

  • Jina Song (Department of Packaging, Yonsei University) ;
  • Sangwoo Kwon (Department of Packaging, Yonsei University) ;
  • Su-il Park (Department of Packaging, Yonsei University)
  • Received : 2022.11.18
  • Accepted : 2023.01.28
  • Published : 2023.04.30

Abstract

The application of starch-based films is limited by the poor water vapor barrier and mechanical properties. In this study, plasticized octenyl-succinated corn starch (OTPS) was mixed into Poly (butylene adipate-co-terephthalate) (PBAT) with various concentration (0/0.25/0.5/0.75 wt%) of epoxidized soybean oil (ESO) to enhance the mechanical properties and the hydrophobicity of blends. Tensile Strength and elongation at break of PBAT/OTPS film was slightly strengthened as the added ratio of ESO raised to 0.5 wt%, yet lessened again in 0.75 wt% sample. The yield strength and elastic modulus were highest in 0.25wt% of ESO added. In thermal properties, the melting temperature (Tm) and crystallization temperature (Tc) were highest at ESO 0.25 and the maximum degradation temperature (Tmax) of components of the films were developed as ESO added. Also, it has been proved that the addition of hydrophobic substances reduces the hydrophilicity of the film by contact angle. This suggests the use of epoxidized oil for preparing films based on high TPS content allows obtaining enhanced interfacial adhesion. This study confirmed that ESO acts as a compatibilizer between OTPS and PBAT to improve the mechanical properties and hydrophobicity of the sample. The sample containing 0.5wt% of ESO was the most suitable for packaging application.

Keywords

Acknowledgement

The authors would like to express their gratitude to colleagues (especially for "Dae Kyu Lim," "Gunhee Park," and "Shinhee Choi") at the Department of Packaging for their support during the tests.

References

  1. Krogars, K., Heinamaki, J., Karjalainen, M., Rantanen, J., Luukkonen, P., and Yliruusi, J. 2003. Development and characterization of aqueous amylose-rich maize starch dispersion for film formation. Eur. J. Pharmacuetics & biopharmaceutics, 56(2): 215-221. https://doi.org/10.1016/S0939-6411(03)00064-X
  2. Jang, H.H., and Park, S.I. 2020. Effects of PEO additions on the mechanical and thermal properties of PLA/PBAT blends. Korean Journal of Packaging Science & Technology, 26(2): 93-98. https://doi.org/10.20909/kopast.2020.26.2.93
  3. Fourati,Y., Tarres, Q., Mutje, P., and Boufi, S. 2018. PBAT/thermoplastic starch blends: Effect of compatibilizers on the rheological, mechanical and morphological properties. Carbohydrate polymers, 199: 51-57. https://doi.org/10.1016/j.carbpol.2018.07.008
  4. Jang, S.H., and Park,S.I. 2010. Mechanical Properties and Degradability of Modified Starch and Polyethylene Blends. Korean Journal of Packaging Science & Technology, 16(2): 59-65.
  5. Seligra, P.G., Moura, L.E., Fama ,L. J., Druzian, I. and Goyanes, S. 2016. Influence of incorporation of starch nanoparticles in PBAT/TPS composite films. Polymer International, 65(8): 938-945. https://doi.org/10.1002/pi.5127
  6. Tavares, L.B., Ito, N.M., Salvadori, M.C., Dos Santos, D.J. and Rosa, D.S. 2018. PBAT/kraft lignin blend in flexible laminated food packaging: Peeling resistance and thermal degradability. Polymer Testing, 67: 169-176. https://doi.org/10.1016/j.polymertesting.2018.03.004
  7. Wongphan, P., Panrong, T. and Harnkarnsujarit , N. 2002. Effect of different modified starches on physical, morphological, thermomechanical, barrier and bio-degradation properties of cassava starch and polybutylene adipate terephthalate blend film. Food Packaging and Shelf Life, 32: 100844.
  8. Lauer, M.K., Tennyson , A.G. and Smith, R.C. 2022. Thermomorphological and mechanical properties of vulcanized octenyl succinate/terpenoid-derivatized corn starch composites. Materials Advances, 3(10): 4186-4193. https://doi.org/10.1039/D1MA01202A
  9. Liu, Z., Liu, X., Cao, Y., Xie, W., Ma, X. and Yu, X. 2013. Edible starch sodium octenyl succinate film formation and its physical properties. Journal of applied polymer science, 127(4): 2922-2927. https://doi.org/10.1002/app.37773
  10. Mali, S., Grossmann, M.V.E., Garcia, M.A., Martino, M. N. and Zaritzky, N.E. 2006. Effects of controlled storage on thermal, mechanical and barrier properties of plasticized films from different starch sources. Journal of food engineering, 75(4): 453-460. https://doi.org/10.1016/j.jfoodeng.2005.04.031
  11. Garcia, M.A., Martino, M.N. and Zaritzky, N.E. 2000. Lipid addition to improve barrier properties of edible starch-based films and coatings. Journal of food science, 65(6): 941-944. https://doi.org/10.1111/j.1365-2621.2000.tb09397.x
  12. Kester, J.J. and Fennema, O.R. 1986. Edible films and coatings: a review. Food Technology, 40(12): 47-59.
  13. Debeaufort, F. and Voilley, A. 1995. Effect of surfactants and drying rate on barrier properties of emulsified edible films. International journal of food science & technology, 30(2): 183-190. https://doi.org/10.1111/j.1365-2621.1995.tb01370.x
  14. Perez-Gago, M.B. an d Krochta, J.M. 2001. Lipid particle size effect on water vapor permeability and mechanical properties of whey protein/beeswax emulsion films. Journal of agricultural and food chemistry, 49(2): 996-1002. https://doi.org/10.1021/jf000615f
  15. Wadaugsorn, K., Panrong, T., Wongphan, P. and Harnkarn sujarit, N. 2022. Plasticized hydroxypropyl cassava starch blended PBAT for improved clarity blown films: Morphology and properties. Industrial Crops and Products, 176: 114311.
  16. Brandelero, R.P.H., Grossmann, M.V. and Yamashita, F. 2012. Films of starch and poly (butylene adipate coterephthalate) added of soybean oil (SO) and Tween 80. Carbohydrate Polymers, 90(4): 1452-1460. https://doi.org/10.1016/j.carbpol.2012.07.015
  17. Rodrigues, M., Oses, J., Ziani, K. and Mate, J.I. 2006. Combined effect of plasticizer and surfactants on the physical properties of starch based edible film. Food Research International, 39(5): 840-846. https://doi.org/10.1016/j.foodres.2006.04.002
  18. Liu, Z., Erhan, S. Z., and Xu, J. 2005. Preparation, characterization and mechanical properties of epoxidized soybean oil/ clay nano composites. Polymer, 46(23): 10119-10127. https://doi.org/10.1016/j.polymer.2005.08.065
  19. Park, S.J., Jin, F.L. and Lee, J.R. 2004. Thermal and mechanical properties of tetrafunctional epoxy resin toughened with epoxidized soybean oil. Materials Science and Engineering: A, 374(1-2): 109-114. https://doi.org/10.1016/j.msea.2004.01.002
  20. Ratna, D., and Banthia, A.K. 2000. Epoxidized soybean oil toughened epoxy adhesive. Journal of Adhesion Science and Technology, 14(1): 15-25. https://doi.org/10.1163/156856100742087
  21. Ibanez, A., Ferrandiz, S., & Martinez, A. 2021. The effect of different epoxidised vegetable oils on injection-moulded starch based thermoplastic polymer filled with almond shell powder. In IOP Conference Series: Materials Science and Engineering, 1193(1): 12015.
  22. Seligra, P.G., Moura, L.E., Fama, L., Druzian, J. I. and Goyanes, S. 2016 . Influence of incorporation of starch nanoparticles in PBAT/TPS composite films. Polymer International, 65(8): 938-945. https://doi.org/10.1002/pi.5127
  23. Tee, Y.B., Talib, R.A., Abdan, K., Chin, N.L., Basha, R.K., and Yunos, K.F.M. 2016. Comparative study of chemical, mechanical , thermal , and barrier properties of poly (lactic acid) plasticized with epoxidized soybean oil and epoxidized palm oil. BioResources, 11(1): 1518-1540.
  24. Zullo, R. and Iannace, S. 2009. The effects of different starch sources and plasticizers on film blowing of thermoplastic starch: Correlation among process, elongational properties and macromolecular structure. Carbohydrate Polymers, 77(2): 376-383. https://doi.org/10.1016/j.carbpol.2009.01.007
  25. Yuan, Y., & Lee, T. R. 2013. Contact angle and wetting properties. In Surface science techniques, 51: 3-34. https://doi.org/10.1007/978-3-642-34243-1_1
  26. Kijchavengkul, T., Auras, R. and Rubino, M. 2008. Measu ring gel content of aromatic polyesters using FTIR spectro photometry and DSC. Polymer Testing, 27(1): 55-60. https://doi.org/10.1016/j.polymertesting.2007.08.007