참고문헌
- Y. J. Yang, S. B. Pyeon, C. S. Cha and I. Y. Yang, "Penetration Fracture Characteristics of Orthotropic CFRP Laminates Shells according to Curvature", J. Korean Soci. Saf., Vol. 31, No. 6, pp. 6-11, 2016.
- J. W. Han, "Low-velocity Impact Characterization of Laminated Composite Materials", J. Korean Soc. Saf., Vol. 23, No. 6, pp. 34-37, 2008.
- G. S. Bir and P. Migliore, "Computerized Method for Preliminary Structural Design of Composite for Two-and Three-Blade Rotors", NREL/TP-500-31486, 2004.
- R. McAdam, T. O'Hare and S. Moffett, "Collaborative Knowledge Sharing in Composite New Product Development : An Aerospace Study", Technovation, Vol. 28, pp. 245-256, 2008. https://doi.org/10.1016/j.technovation.2007.07.003
- W. C. Hwang, C. S. Cha and I. Y. Yang, "The Static Collapse Characteristies of CFRP Single and Double Hat Shape Section Members according to the Interface Number for Lightweight", J. Korean Soc. Saf., Vol. 27, No. 6, pp. 20-25, 2012.
- https://blog.naver.com/mjint22/222947223286
- https://blog.naver.com/prismco/222603717264
- https://blog.naver.com/the-engineer/222465896964
- E. O. Akser and K. L. Choy, "Finite Element Analysis of the Stress Distribution in a Thermally and Transversely Loaded Ti-6Al-4V/Sic Fibre Composite", Composites Part A : Applied Science and Manufacturing, Vol. 32, pp. 243-251, 2001. https://doi.org/10.1016/S1359-835X(00)00097-X
- B. Fiedler, M. Hojo and S. Ochiai, "The Influence of Thermal Residual Stresses on the Transverse Strength of CFRP using FEM", Composites Part A : Applied Science and Manufacturing, Vol. 33, pp. 1323-1326, 2002. https://doi.org/10.1016/S1359-835X(02)00169-0
- H. T. X. Truong, M. J. Martinez, O. O. Ochoa and D. C. Lagoudas, "Mode I Fracture Toughness of Hybrid Co-cured Al-CFRP and NiTi-CFRP Interfaces : An Experimental and Computational study", Composites Part A : Applied Science and Manufacturing, Vol. 135, 2020.
- K. Chawla, S. Ray-Chaudhuri and R. Kitey, "Interlaminar Fracture Toughness of Short Fibre Reinforced GFRP Laminates", Procedia Structural Integrity, Vol. 14, pp. 571-576, 2019. https://doi.org/10.1016/j.prostr.2019.05.070
- Z. P. Chow, Z. Ahmad, K. J. Wong and H. A. Israr, "Thermo-mechanical Characterisation and Modelling of GFRP Laminated Aluminium", Composites Part B: Engineering, Vol. 173, 2019.
- D. Tumino and B. Zuccarello, "Fatigue Delamination Experiments on GFRP and CFRP Specimens under Single and Mixed Fracture Modes", Procedia Engineering, Vol. 10, pp. 1791-1796, 2011. https://doi.org/10.1016/j.proeng.2011.04.298
- J. H. Yoo, "A Study on Mechanical Strength in Al7075/CFRP Hybird Composite", J. Korean Soc. Saf., Vol. 12, No. 3, pp. 2-6, 1997.
- https://matweb.com/search/PropertySearch.aspx
- ASTM D 5528-21, Standard Test Method for "Mode I Interlaminar Fracture Toughness of Unidirectional Fiber Reinforced Polymer Matrix Composites", ASTM International, 2022.
- M. M. Shokrieh and A. Zeinedini "A Novel Method for Calculation of Strain Energy Release Rate of Asymmetric Double Cantilever Laminated Composite Beams", Applied Composite Materials, Vol. 21, pp. 399-415, 2014. https://doi.org/10.1007/s10443-013-9328-5