Current Optics and Photonics

  • 제7권3호
  • /
  • Pages.263-272
  • /
  • 2023
  • /
  • 2508-7266(pISSN)
  • /
  • 2508-7274(eISSN)
한국광학회 (Optical Society of Korea)
권호 표지
DOI QR코드

DOI QR Code

Novel Telecentric Collimator Design for Mobile Optical Inspection Instruments

  • Hojong Choi (Department of Electronic Engineering, Gachon University) ;
  • Seongil Cho (Department of Optical Engineering, Kumoh National Institute of Technology) ;
  • Jaemyung Ryu (Department of Optical Engineering, Kumoh National Institute of Technology)
  • 투고 : 2023.02.06
  • 심사 : 2023.04.26
  • 발행 : 2023.06.25
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

A collimator refers to an optical system that images a collimated beam at a desired point. A resolution target located at a near distance can be converted into a virtual image located at a long distance. To test the resolution for mobile cameras, a large target is placed at a long distance. If a collimator system is used, the target can be placed at a near distance. The space required for a resolution inspection can thus be drastically reduced. However, to inspect a mobile camera, the exit pupil of the collimator system and the entrance pupil of the mobile camera must match, and the stop of the collimator system must be located on the last surface. Because a collimator system cannot be symmetrical with respect to the stop, the distortion becomes extremely large, which can be corrected by combining the collimator symmetrically with respect to the object plane. A novel system was designed to inspect an optical lens on a mobile phone. After arranging the refractive power, lenses were added using the equivalent lens design method. The distortion was reduced to less than 1%. This optical system satisfies a half-field angle of 45° and an optical performance sufficient for inspection.

키워드

과제정보

The authors thank the American English editing services for scientific papers.

참고문헌

  1. N. Pears, Y. Liu, and P. Bunting, 3D Imaging, Analysis and Applications (Springer, 2012).
  2. C. Song, Y. Jung, S. Bae, J. Song, and Y. Kim, "Auto detect inspection system for single lens product of mobile phone camera," in Proc. Korean Society of Precision Engineering Spring Conference (Ramada hotel, Jeju island, Korea. Jun. 23-24. 2005), pp. 432-435.
  3. D. H. Moon, S. G. Baek, B. L. Zhang, J. Y. Jung, Y. K. Kim, and J. Y. Song, "Application of virtual manufacturing in developing manufacturing system for the lens module of phone-camera," IFAC Proc. 39, 95-100 (2006).
  4. K. W. Ko, D. H. Kim, M. Y. Kim, and J. H. Kim, "An automatic optical inspection system for inspection of CMOS compact camera module assembly," Int. J. Precis. Eng. Manuf. 10, 67-72 (2009). https://doi.org/10.1007/s12541-009-0095-z
  5. Y.-H. Chen, Y.-F. Hsieh, C.-W. Hsu, M. Ou-Yang, L. Cheng-Chung, C.-H. Hwang, and T.-S. Liao, "An image based optical lens eccentric error inspection system," in Proc. 2012 IEEE International Instrumentation and Measurement Technology Conference Proceedings (Graz, Austria, May 13-16. 2012), pp. 1094-1097.
  6. H.-S. Kim, K.-J. Lee, D.-Y. Jung, Y.-H. Lee, J.-H. Park, and G.-S. Kim, "Design for a defective product inspection device for the curved glass used in Smart-phones," J. Inst. Contr. Robot. Syst. 21, 794-800 (2015). https://doi.org/10.5302/J.ICROS.2015.15.0049
  7. J. Torng, K. K. Maung, and K.-C. Fan, "Development of an automated optical inspection system for mobile phone panels," J. Chin. Soc. Mech. Eng. 34, 103-108 (2013).
  8. F. L. Pedrotti, and L. S. Pedrotti, Introduction to Optics, 2nd ed. (Prentice-Hall, 1993).
  9. F. Twyman, Prism and Lens Making: A Textbook for Optical Glassworkers (Routledge, UK, 1988).
  10. P. Mouroulis, and J. Macdonald, Geometrical Optics and Optical Design, 1st ed. (Oxford University Press, USA, 1997).
  11. C. Velzel, A Course in Lens Design (Springer, Netherlands, 2014).
  12. G. H. Smith, Practical Computer-Aided Lens Design (Willmann-Bell, USA, 1998).
  13. W. J. Smith, Modern Lens Design, 2nd ed. (McGraw-Hill, USA, 2004).
  14. A. D. Clark, and W. Wright, Zoom Lenses (Monographs on Applied Optics Series no. 7), (Hilger, UK, 1973).
  15. K. M. Kim, S.-H. Choe, J.-M. Ryu, and H. Choi, "Computation of analytical zoom locus using pade approximation," Mathematics 8, 581 (2020).
  16. S. Thibault, J. Gauvin, M. Doucet, and M. Wang, "Enhanced optical design by distortion control," in Optical Design and Engineering II, L. Mazuray and R. Wartmann, Eds. (SPIE Press, USA, 2005), p. 596211.
  17. R. Fischer, B. Tadic-Galeb, and P. Yoder, Optical System Design, 2nd ed. (McGraw-Hill, USA, 2008).
  18. K.-E. Peiponen, R. Myllyla, and A. V. Priezzhev, Optical Measurement Techniques: Innovations for Industry and the Life Sciences (Springer Series in Optical Sciences), (Springer Berlin, Germany, 2009).
  19. M. Watanabe and S. K. Nayar, "Telecentric optics for focus analysis," IEEE Trans. Pattern Anal. Mach. Intel. 19, 1360-1365 (1997). https://doi.org/10.1109/34.643894
  20. V. N. Mahajan, Optical Imaging and Aberrations: Part I: Ray Geometrical Optics (SPIE Press, USA, 1998).
  21. M. Laikin, Lens Design (CRC Press, USA, 2007).
  22. H. Choi, J.-M. Ryu, and S.-W. Choe, "A novel therapeutic instrument using an ultrasound-light-emitting diode with an adjustable telephoto lens for suppression of tumor cell proliferation," Measurement 147, 106865 (2019).
  23. J. M. Ryu, J. H. Oh, and J. H. Jo, "Unified analytic calculation method for zoom loci of zoom lens systems with a finite object distance," J. Opt. Soc. Korea 18, 134-145 (2014). https://doi.org/10.3807/JOSK.2014.18.2.134
  24. R. Kingslake and R. B. Johnson, Lens Design Fundamentals, 2nd ed. (Academic Press, 2010).
  25. H. Choi, J.-Y. Yeom, and J.-M. Ryu, "Development of a multiwavelength visible-range-supported opto-ultrasound instrument using a light-emitting diode and ultrasound transducer," Sensors 18, 3324 (2018).
  26. H. Zappe, Fundamentals of Micro-optics (Cambridge University Press, UK, 2010).
  27. H. Choi, J.-Y. Jo, and J.-M. Ryu, "A novel focal length measurement method for center-obstructed omni-directional reflective optical systems," Appl. Sci. 9, 2350 (2019).
  28. H. Choi and J. Ryu, "Design of wide angle and large aperture optical system with inner focus for compact system camera applications," Appl. Sci. 10, 179 (2020).
  29. S. Ray, Applied Photographic Optics, 3rd ed. (Routledge, USA, 2002).
  30. K. K. Sharma, Optics: Principles and Applications, 1st ed. (Academic Press, USA, 2006).
  31. B. Prescott and G. McLean, "Line-based correction of radial lens distortion," Grap. Models Image Process. 59, 39-47 (1997). https://doi.org/10.1006/gmip.1996.0407