DOI QR코드

DOI QR Code

High Thermoluminescence Properties of Dy+Ce, and Dy+Na Co-Doped MgB4O7 for a Light Tracer Application

비화공식 예광탄 응용을 위한 Dy+Ce 및 Dy+Na 이중 도핑된 MgB4O7의 높은 열발광 특성

  • Jinu Park (Department of Materials Science and Engineering, Korea Advanced Institute of Science and Technology (KAIST)) ;
  • Nakyung Kim (Department of Materials Science and Engineering, Korea Advanced Institute of Science and Technology (KAIST)) ;
  • Jiwoon Choi (Department of Materials Science and Engineering, Korea Advanced Institute of Science and Technology (KAIST)) ;
  • Youngseung Choi (Department of Materials Science and Engineering, Korea Advanced Institute of Science and Technology (KAIST)) ;
  • Sanghyuk Ryu (Department of Materials Science and Engineering, Korea Advanced Institute of Science and Technology (KAIST)) ;
  • Sung-Jin Yang (Poongsan Defense R&D Institute) ;
  • Duck Hyeong Jung (Poongsan Defense R&D Institute) ;
  • Byungha Shin (Department of Materials Science and Engineering, Korea Advanced Institute of Science and Technology (KAIST))
  • 박진우 (한국과학기술원 신소재공학과) ;
  • 김나경 (한국과학기술원 신소재공학과) ;
  • 최지운 (한국과학기술원 신소재공학과) ;
  • 최영승 (한국과학기술원 신소재공학과) ;
  • 류상혁 (한국과학기술원 신소재공학과) ;
  • 양성진 ((주)풍산방산기술연구원) ;
  • 정덕형 ((주)풍산방산기술연구원) ;
  • 신병하 (한국과학기술원 신소재공학과)
  • Received : 2022.11.18
  • Accepted : 2023.01.09
  • Published : 2023.01.27

Abstract

'Tracers' are bullets that emit light at the backside so that the shooter can see the trajectory of their flight. These light-emitting bullets allow snipers to hit targets faster and more accurately. Conventional tracers are all combustion type which use the heat generated upon ignition. However, the conventional tracer has a fire risk at the impact site due to the residual flame and has a by-product that can contaminate the inside of the gun and lead to firearm failure. To resolve these problems, it is necessary to develop non-combustion-type tracers that can convert heat to luminance, so-called 'thermoluminescence (TL)'. Here, we highly improve the thermoluminescence properties of MgB4O7 through co-doping of Dy3++Ce3+ and Dy3++Na+. The presence of doping materials (Dy3+, Ce3+, Na+) was confirmed by XPS (X-ray photoelectron spectroscopy). The as-synthesized co-doped MgB4O7 was irradiated with a specific radiation dose and heated to 500 ℃under dark conditions. Different thermoluminescence characteristics were exhibited depending on the type or amounts of doping elements, and the highest luminance of 370 cd/m2 was obtained when Dy 10 % and Na 5 % were co-doped.

Keywords

Acknowledgement

We would like to thank Poongsan R&D Institute for their financial support for this research project in 2022.

References

  1. D. Bae, Natl. Def. Res. Ser., 8, 71 (2003).
  2. T. Kwon, Q. J. Def. Policy Stud., 7, 65 (2004).
  3. J.-U. Lee and W.-S. Kim, Def. Technol., 8, 46 (2001).
  4. J. Park, N. Kim, J. Choi, J. Koh, H. S. Chin, D. H. Jung and B. Shin, Korean J. Mater. Res., 32, 9 (2022).
  5. N. Kucuk, A. H. Gozel, M. Yuksel, T. Dogan and M. Topaksu, Appl. Radiat. Isot., 104, 186 (2015).
  6. Y. S. Kawashima, C. F. Gugliotti, M. Yee, S. H. Tatumi and J. C. R. Mittani, Radiat. Phys. Chem., 95, 91 (2014).
  7. L. F. Souza, R. M. Vidal, S. O. Souza and D. N. Souza, Radiat. Phys. Chem., 104, 100 (2014).
  8. T. D. Gustafson, Ph. D. Thesis, p. 1-208, Oklahoma State University, Oklahoma (2018).
  9. A. Ozdemir, V. Altunal, V. Guckan, K. Kurt and Z. Yegingil, J. Alloys Compd., 865, 158498 (2021).
  10. T. K. G. Rao, B. C. Bhatt, J. K. Srivastava and K. S. V. Nambi, J. Phys.: Condens. Matter, 5, 1791 (1993).
  11. C. Furetta, G. Kitis, P. S. Weng and T. C. Chu, Nucl. Instrum. Methods Phys. Res., Sect. A, 420, 441 (1999). https://doi.org/10.1016/S0168-9002(98)01198-X