과제정보
본 과제는 대우조선해양과 정부(과학기술정보통신부)의 재원으로 한국연구재단의 지원을 받아 수행된 연구 (No. 2020R1A5A8018822)이며, 연구비 지원에 감사드립니다.
참고문헌
- Al-Thairy, H., 2017. Single degree of freedom analysis method for steel Beams under blast pressure using nonlinear resistance function with strain rate effects, Journal of Babylon University/Engineering Sciences, 24(3), pp.298-313.
- Amdahl, J., 2003. Revised NORSOK standard N-004 on accidental explosion. [Online] Available at https://www.usfos.com/publications/explosion/documents/2003-DesignOrientedMethodsAccidentalExplosions.pdf [Accessed 1 August 2022].
- Amdahl, J., 2004. Resistance to accidental and very extreme explosion. [Online] Available at https://www.usfos.com/publications/explosion/documents/2004-ResistanceAccidental&ExtremeExplosions.pdf [Accessed 1 August 2022].
- Baker, W.E., Cox, P.A., Kulesz, J.J., Strehlow, R.A. and Westine, P.S., 1983. Explosion hazards and evaluation. Elsevier Scientific Pub: Amsterdam(New York).
- Brefort, D., S. Colin, A.H. Jansen, E. Duchateu, Pawling, R. et al., 2018. An architectural framework for distributed naval ship systems. Ocean Engineering, 147, pp.375-385. https://doi.org/10.1016/j.oceaneng.2017.10.028
- DNVGL, 2019. Structural design against accidental loads, recommended practice, DNVGL-RP-C204.
- Habben Jensen, A.C. Kana, A.A. and Hopman, J.J., 2019. Markov-based vulnerability assessment for the design of on-board distributed systems in the concept phase. Ocean Engineering, 190, pp.106448.
- Idriss, J., Fritz, J. and Schmidt, J., 2016. Dynamic analysis of insulated metal panels for blast effects, Structures Magazines, pp.12-15.
- Kim, S.H., 2015, Development of blast hardened bulkheads with attached aluminum foam, Master. KAIST.
- Kim S.J., Son, J.M., Lee, J.C., Li, C.B., Seong, D.J. and Paik, J.K., 2014. Dynamic structural response characteristics of stiffened blast wall under explosion load, Journal of the Society of Naval Architects of Korea, 51(5), pp.380-387. https://doi.org/10.3744/SNAK.2014.51.5.380
- Kim, U.N. and Ha, S.S., 2020. A review on practical use of simple analysis method based on SDOF model for the stiffened plate structures subjected to blast loads. Journal of the Society of Naval Architects of Korea, 57(2), pp.70-79. https://doi.org/10.3744/SNAK.2020.57.2.070
- Kim, Y.Y., Choi, G.G., Na, Y.S. and Han, S.H., 2015. Development of design and validation technology for blast hardened bulkheads, Proceedings of Advances in Structural Engineering and Mechanics (ASEM15), Incheon, Korea, August 25-29.
- Lee, S.G., Lee, H.S., Lee, J.S., Kim, Y.Y. and Choi, G.G., 2017. Shock response analysis of blast hardened bulkhead in partial chamber model under internal blast, Proceedings of the 11th International Symposium on Plasticity and Impact Mechanics (Procedia Engineering), 173, pp.511-518.
- MSC Nastran, 2020. Nonlinear User's Guide.
- Nho, I.S., Park, M.J. and Cho, Y.S., 2018a. Preliminary structural design of blast hardened bulkhead (The 1st report : formulation of simplified structural analysis/design method). Journal of the Society of Naval Architects of Korea, 55(5), pp.371-378. https://doi.org/10.3744/SNAK.2018.55.5.371
- Nho, I.S., Park, M.J. and Cho, Y.S., 2018b, Preliminary structural design of blast hardened bulkhead (The 2nd report: scantling formula for curtain plate type blast hardened bulkhead), 55(5), pp.379-384. https://doi.org/10.3744/SNAK.2018.55.5.379
- NORSOK Standard, 2004. Design of steel structures, Rev.2, Standard N-004, Norway Lysaker: Standards Norway.
- Republic of Korean Navy, 2019, Guideline for Design of Blast Hardened Bulkhead.
- Shin, H.S., Kim, S., Moon, J., Kim, W. and Hong, W., 2020. Failure behavior analysis of single-leaf blast-resistant door by explosion loads, J. Korean Soc. Hazard Mitig. 20(4), pp.195-206. https://doi.org/10.9798/KOSHAM.2020.20.4.195
- Sohn, J.M. and Kim, S.J. 2017. Numerical investigation of structural response of corrugated blast wall depending on blast load pulse shape. Latin American Journal of Solid and Structures, 14(9), pp.1710-1722. https://doi.org/10.1590/1679-78254060
- Stark, S. and Sajdak, J., 2012. Design and effectiveness criteria for blast hardened bulkhead applications on naval combatants, Proceedings of the 4th International Conference on Design and Analysis of Protective Structures, Jeju, Korea.
- Stark, S.A., 2016. Definition of damage volumes for the rapid prediction of ship vulnerability to AIREX weapon effects. Master, Virginia Tech.
- Stolz, A., Millon, O. and Klomfass, A., 2016. Analysis of the resistance of structural components to explosive loading by shock-tube tests and SDOF models, Chemical Engineering Transactions, 48, pp.151-156.
- U.S. Army corps of engineers, 2008. Structures to resist the effects of accidental explosions.
- Tsai, Y. and Krauthammer, T., 2017. Energy based load-impulse diagrams. Engineering Structures. 149, pp.64-77. https://doi.org/10.1016/j.engstruct.2016.10.042