Structural Engineering and Mechanics

  • 제86권1호
  • /
  • Pages.29-48
  • /
  • 2023
  • /
  • 1225-4568(pISSN)
  • /
  • 1598-6217(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

An investigation into adequacy of separation gap to preclude earthquake-induced pounding

  • Yazan Jaradat (School of Civil and Environmental Engineering, Faculty of Engineering and Information Technology, University of Technology Sydney (UTS)) ;
  • Pejman Sobhi and Harry Far (School of Civil and Environmental Engineering, Faculty of Engineering and Information Technology, University of Technology Sydney (UTS))
  • 투고 : 2022.08.08
  • 심사 : 2023.03.06
  • 발행 : 2023.04.10
⟨ 이전 논문 다음 논문 ⟩

초록

Pounding happens when contiguous structures with differing heights vibrate out of line caused by a seismic activity. The situation is aggravated due to the insufficient separation gap between the structures which can lead to the crashing of the buildings or total collapse of an edifice. Countries around the world have compiled building standards to address the pounding issue. One of the strategies recommended is the introduction of the separation gap between structures. AS1170.4-2007 is an Australian standard that requires 1% of the building height as a minimum separation gap between buildings to preclude pounding. This article presents experimental and numerical tests to determine the adequacy of this specification to prevent the occurrence of seismic pounding between steel frame structures under near-field and far-field earthquakes. The results indicated that the recommended minimum separation gap based on the Australian Standard is inaccurate if low-rise structure in a coupled case is utilised under both near and far field earthquakes. The standard is adequate if a tall building is involved but only when a far-field earthquake happens. The research likewise presents results derived by using the ABS and SRSS methods.

키워드

참고문헌

  1. Abdel Raheem, S.E. (2006), "Seismic pounding between adjacent building structures", Elec. J. Struct. Eng., 6, 66-74. https://doi.org/10.56748/ejse.659.
  2. Abdel Raheem, S.E. (2014), "Mitigation measures for earthquake induced pounding effects on seismic performance of adjacent buildings", Bull. Earthq. Eng., 12(4), 1705-1724. https://doi.org/10.1007/s10518-014-9592-2.
  3. Anagnostopoulos, S. and Karamaneas, C. (2008), "Use of collision shear walls to minimize seismic separation and to protect adjacent buildings from collapse due to earthquake-induced pounding", Earthq. Eng. Struct. Dyn., 37(12), 1371-1388. https://doi.org/10.1002/eqe.817.
  4. Anagnostopoulos, S.A. (1988), "Pounding of buildings in series during earthquakes", Earthq. Eng. Struct. Dyn., 16(3), 443-456. https://doi.org/10.1002/eqe.4290160311.
  5. Anagnostopoulos, S.A. and Spiliopoulos, K.V. (1992), "An investigation of earthquake induced pounding between adjacent buildings", Earthq. Eng. Struct. Dyn., 21(4), 289-302. https://doi.org/10.1002/eqe.4290210402.
  6. AS/NZS3678 (2011), Structural Steel-Hot-Rolled Plates, Floorplates and Slabs, Australian Standards, Sydney.
  7. AS1170.4 (2007), Structural Design Actions Part 4: Earthquake Actions in Australia, Australian Standards, Sydney.
  8. ASCE (2013), Minimum Design Loads for Buildings and other Structures (asce/sei 7-10), American Society of Civil Engineers, USA.
  9. Barros, R.C. and Khatami, S.M. (2012), "Seismic response effect of shear walls in reducing pounding risk of reinforced concrete buildings subjected to near-fault ground motions", Proceedings of the 5th World Conference on Earthquake Engineering. Lisbon, Portugal.
  10. Chopra, A. (2007), Dynamics of Structures, 3rd Edition, New Jersey, Prentice Hall.
  11. Cole, G., Chouw, N. and Dhakal, R. (2011), "Building and bridge pounding damage observed in 2011 Christchurch earthquake", Bull. NZ Soc. Earthq. Eng., 44(4), 334-341. https://doi.org/10.5459/bnzsee.44.4.334-341
  12. Cole, G., Dhakal, R., Carr, A. and Bull, D. (2010), "Building pounding state of the art: Identifying structures vulnerable to pounding damage", Proceedings of the 2010 NZSEE Conference, Christchurch, New Zealand.
  13. Eurocode-8 (2005), Design of Structures for Earthquake Resistance-Part 1: General Rules, Seismic Actions and Rules for Buildings, European Committee for Standardization, Brussels, Belgium.
  14. Favvata, M.J. (2017), "Minimum required separation gap for adjacent rc frames with potential inter-story seismic pounding", Eng. Struct., 152, 643-659. https://doi.org/10.1016/j.engstruct.2017.09.025.
  15. Flenga, M.G. and Favvata, M.J. (2020), "Global and local performance levels on the probabilistic evaluation of the structural pounding effect between adjacent RC structures, Proceedings of the 11th International Conference on Structural Dynamics, EURODYN, Athens, Greece.
  16. Flenga, M.G. and Favvata, M.J. (2021a), "Fragility curves and probabilistic seismic demand models on the seismic assessment of rc frames subjected to structural pounding", Appl. Sci., 11(17), 8253. https://doi.org/10.3390/app11178253.
  17. Flenga, M.G. and Favvata, M.J. (2021b), "Probabilistic seismic assessment of the pounding risk based on the local demands of a multistory rc frame structure", Eng. Struct., 245, 112789. https://doi.org/10.1016/j.engstruct.2021.112789.
  18. GB50011 (2001), Code for Seismic Design of Buildings (2001 Edition), China Building Industry Publisher, Beijing.
  19. Hao, H. (2015), "Analysis of seismic pounding between adjacent buildings", Austr. J. Struct. Eng., 16(3), 208-225. https://doi.org/10.1080/13287982.2015.1092684.
  20. Hao, H. and Liu, X. (1998), "Estimation of required separations between adjacent structures under spatial ground motions", J. Earthq. Eng., 2(02), 197-215. https://doi.org/10.1080/13632469809350319
  21. Hatzigeorgiou, G.D. (2010), "Damping modification factors for sdof systems subjected to near-fault, far-fault and artificial earthquakes", Earthq. Eng. Struct. Dyn., 39(11), 1239-1258. https://doi.org/10.1002/eqe.991.
  22. IBC (2009), International Building Code, International Code Council, Country Club Hills, Illinois. USA.
  23. ISC (2005), Iranian Code of Practice for Seismic Resistant Design of Buildings, Standard, 30, 31.
  24. Jankowski, R. (2008a), "Comparison of numerical models of impact force for simulation of earthquake-induced structural pounding", Proceedings of the International Conference on Computational Science, Krakow, Poland.
  25. Jankowski, R. (2008b), "Earthquake-induced pounding between equal height buildings with substantially different dynamic properties", Eng. Struct., 30(10), 2818-2829. https://doi.org/10.1016/j.engstruct.2008.03.006.
  26. Jankowski, R. (2010), "Experimental study on earthquake-induced pounding between structural elements made of different building materials", Earthq. Eng. Struct. Dyn., 39(3), 343-354. https://doi.org/10.1002/eqe.941.
  27. Jankowski, R. and Mahmoud, S. (2016), "Linking of adjacent three-storey buildings for mitigation of structural pounding during earthquakes", Bull. Earthq. Eng., 14(11), 3075-3097. https://doi.org/10.1080/10.1007/s10518-016-9946-z.
  28. Jaradat, Y. and Far, H. (2020), "Optimum stiffness values for impact element models to determine pounding forces between adjacent buildings", Struct. Eng. Mech., 77(2), 293-304. https://doi.org/10.12989/sem.2021.77.2.293.
  29. Jaradat, Y. and Far, H. (2021). Project title: Seismic behaviour of high-rise and mid-rise buildings. Retrieved from https://www.youtube.com/channel/UCchETciW6Dmzzpxys7mg4Ew.
  30. Jeng, V., Kasai, K. and Jagiasi, A. (1992), "The separation to avoid seismic pounding", Proceeding of the 10th World Conf. on Earthquake Engineering, Madrid, July.
  31. Kamal, M. and Inel, M. (2022), "Simplified approaches for estimation of required seismic separation distance between adjacent reinforced concrete buildings", Eng. Struct., 252, 113610. https://doi.org/10.1016/j.engstruct.2021.113610.
  32. Karayannis, C.G. and Favvata, M. J. (2008), "Non-linear static versus dynamic analyses for the interaction of structures", Proceeding of the 7th European Conference on Structural Dynamics, EURODYN.
  33. Karayannis, C.G. and Favvata, M.J. (2005a), "Earthquake-induced interaction between adjacent reinforced concrete structures with non-equal heights", Earthq. Eng. Struct. Dyn., 34(1), 1-20. https://doi.org/10.1002/eqe.398.
  34. Karayannis, C.G. and Favvata, M.J. (2005b), "Inter-story pounding between multistory reinforced concrete structures", Struct. Eng. Mech., 20(5), 505-526. https://doi.org/10.12989/sem.2005.20.5.505.
  35. Karayannis, C.G. and Naoum, M.C. (2017a), "Inter-story pounding and torsional effect due to interaction between adjacent multistory RC buildings", Proceeding of the COMPDYN, 6th ECCOMAS Thematic Conference on Computational Methods in Structural Dynamics and Earthquake Engineering, Greece.
  36. Karayannis, C.G. and Naoum, M.C. (2017b), "Torsion effect due to asymmetric pounding between multistory RC buildings", Proceeding of the COMPDYN 2017, 6th ECCOMAS Thematic Conference on Computational Mechanics in Structural Dynamics and Earthquake Engineering, Rhodes Island, Greece, June.
  37. Karayannis, C.G. and Naoum, M.C. (2018), "Torsional behavior of multistory RC frame structures due to asymmetric seismic interaction", Eng. Struct., 163, 93-111. https://doi.org/10.1016/j.engstruct.2018.02.038.
  38. Kasai, K. and Maison, B.F. (1997), "Building pounding damage during the 1989 loma prieta earthquake", Eng. Struct., 19(3), 195-207. https://doi.org/10.1016/S0141-0296(96)00082-X.
  39. Kasai, K., Jagiasi, A.R. and Jeng, V. (1996), "Inelastic vibration phase theory for seismic pounding mitigation", J. Struct. Eng., 122(10), 1136-1146. https://doi.org/10.1061/(ASCE)0733-9445(1996)122:10(1136).
  40. Kazemi, F., Miari, M. and Jankowski, R. (2021), "Investigating the effects of structural pounding on the seismic performance of adjacent rc and steel mrfs", Bull. Earthq. Eng., 19(1), 317-343. https://doi.org/10.1007/s10518-020-00985-y
  41. Kazemi, F., Mohebi, B. and Yakhchalian, M. (2020), "Predicting the seismic collapse capacity of adjacent structures prone to pounding", Can. J. Civil Eng., 47(6), 663-677. https://doi.org/10.1139/cjce-2018-072.
  42. Khatami, S.M., Naderpour, H., Razavi, S.M.N., Barros, R.C., Soltysik, B. and Jankowski, R. (2020), "An ann-based approach for prediction of sufficient seismic gap between adjacent buildings prone to earthquake-induced pounding", Appl. Sci., 10(10), 3591. https://doi.org/10.3390/app10103591.
  43. K-Karamodin, A. and H-Kazemi, H. (2010), "Semi-active control of structures using neuro-predictive algorithm for MR dampers", Struct. Control Hlth. Monit.: Offic. J. Int. Assoc. Struct. Control Monit. Eur. Assoc. Control Struct., 17(3), 237-253. https://doi.org/10.1002/stc.278.
  44. Leibovich, E., Rutenberg, A. and Yankelevsky, D. (1996), "On eccentric seismic pounding of symmetric buildings", Earthq. Eng. Struct. Dyn., 25(3), 219-233. https://doi.org/10.1002/(SICI)1096-9845(199603)25:3<219::AID-EQE537>3.0.CO,2-H.
  45. Lin, J.H. and Weng, C.C. (2001), "Spectral analysis on pounding probability of adjacent buildings", Eng. Struct., 23(7), 768-778. https://doi.org/10.1016/S0141-0296(00)00098-5.
  46. Lin, J.H. and Weng, C.C. (2002), "A study on seismic pounding probability of buildings in taipei metropolitan area", J. Chin. Inst. Eng., 25(2), 123-135. https://doi.org/10.1080/02533839.2002.9670687.
  47. Lopez-Garcia, D. and Soong, T.T. (2009), "Assessment of the separation necessary to prevent seismic pounding between linear structural systems", Prob. Eng. Mech., 24(2), 210-223. https://doi.org/10.1016/j.probengmech.2008.06.002.
  48. Maison, B.F. and Kasai, K. (1992), "Dynamics of pounding when two buildings collide", Earthq. Eng. Struct. Dyn., 21(9), 771-786. https://doi.org/10.1002/eqe.4290210903.
  49. NBCC (2010), National Building Code of Canada, National Research Council, Ottawa.
  50. Noman, M., Alam, B., Fahad, M., Shahzada, K. and Kamal, M. (2016), "Effects of pounding on adjacent buildings of varying heights during earthquake in pakistan", Cogent Eng., 3(1), 1225878. https://doi.org/10.1080/23311916.2016.1225878.
  51. Papagiannopoulos, G.A. and Hatzigeorgiou, G.D. (2011), "On the use of the half-power bandwidth method to estimate damping in building structures", Soil Dyn. Earthq. Eng., 31(7), 1075-1079. https://doi.org/10.1016/j.soildyn.2011.02.007.
  52. Polycarpou, P.C., Papaloizou, L. and Komodromos, P. (2014), "An efficient methodology for simulating earthquake-induced 3d pounding of buildings", Earthq. Eng. Struct. Dyn., 43(7), 985-1003. https://doi.org/10.1002/eqe.2383.
  53. Raheem, S.E.A. (2013), "Mitigation measures for seismic pounding effects on adjacent buildings responses", Proceeding of the 4th ECCOMAS Thematic Conference, Kos Island, Greece.
  54. Raheem, S.E.A., Fooly, M.Y., Omar, M. and Zaher, A.K.A. (2019), "Seismic pounding effects on the adjacent symmetric buildings with eccentric alignment", Earthq. Struct., 16(6), 715-726. https://doi.org/10.12989/eas.2019.16.6.715.
  55. Raheem, S.E.A., Fooly, M.Y., Shafy, A.G., Abbas, Y.A., Omar, M., Latif, M. and Mahmoud, S. (2018), "Seismic pounding effects on adjacent buildings in series with different alignment configurations", Steel Compos. Struct., 28(3), 289-308. https://doi.org/10.12989/scs.2018.28.3.289.
  56. Richardson, A., Walsh, K. and Abdullah, M. (2013), "Closed-form design equations for controlling vibrations in connected structures", J. Earthq. Eng., 17(5), 699-719. https://doi.org/10.1080/13632469.2013.771590.
  57. Rosenblueth, E. and Meli, R. (1986), "The 1985 earthquake: Causes and effects in mexico city", Concrete Int., 8(5), 23-34.
  58. SAP, C. (2000), Integrated Software for Structural Analysis and Design, Analysis Reference Manual.
  59. Shrestha, B. (2013), "Effects of separation distance and nonlinearity on pounding response of adjacent structures", Int. J. Civil Struct. Eng., 3(3), 603. https://doi.org/10.6088/ijcser.201203013055.
  60. Shrestha, B. and Hao, H. (2018), "Building pounding damages observed during the 2015 gorkha earthquake", J. Perform. Constr. Facil., 32(2), 04018006. https://doi.org/10.1061/(ASCE)CF.1943-5509.0001134.
  61. Skrekas, P., Sextos, A. and Giaralis, A. (2014), "Influence of bidirectional seismic pounding on the inelastic demand distribution of three adjacent multi-storey R/C buildings", Earthq. Struct., 6(1), 71-87. https://doi.org/10.12989/eas.2014.6.1.071.
  62. Soltysik, B., Falborski, T. and Jankowski, R. (2017), "Preventing of earthquake-induced pounding between steel structures by using polymer elements-experimental study", X International Conference on Structural Dynamics, EURODYN.
  63. Tabatabaiefar, H.R. and Mansoury, B. (2016), "Detail design, building and commissioning of tall building structural models for experimental shaking table tests", Struct. Des. Tall Spec. Build., 25(8), 357-374. https://doi.org/10.1002/tal.1262.
  64. Tabatabaiefar, S.H.R., Fatahi, B. and Samali, B. (2014), "Numerical and experimental investigations on seismic response of building frames under influence of soil-structure interaction", Adv. Struct. Eng., 17(1), 109-130. https://doi.org/10.1260/1369-4332.17.1.109
  65. TBC (1997), Construction and Planning Administration, Ministry of Interior, Seismic Provisions, Taiwan Building Code.
  66. Yaghmaei-Sabegh, S. and Jalali-Milani, N. (2012), "Pounding force response spectrum for near-field and far-field earthquakes", Scientia Iranica, 19(5), 1236-1250. https://doi.org/10.1016/j.scient.2012.07.012.
  67. Yaghmaei-Sabegh, S. and Tsang, H. (2011), "An updated study on near-fault ground motions of the 1978 tabas, iran, earthquake (mw=7.4)", Scientia Iranica, 18(4), 895-905. https://doi.org/10.1016/j.scient.2011.07.018.