Current Photovoltaic Research

  • 제11권1호
  • /
  • Pages.18-26
  • /
  • 2023
  • /
  • 2288-3274(pISSN)
  • /
  • 2508-125X(eISSN)
한국태양광발전학회 (Korea Photovoltaic Society)
권호 표지
DOI QR코드

DOI QR Code

주석 페로브스카이트 태양전지에 관한 고찰: 재료 및 장치적 특성

Review on Tin Perovskite Solar Cells: Material and Device Properties

  • 최다영 (화학공학과, 포항공과대학교) ;
  • 임세영 (화학공학과, 포항공과대학교) ;
  • 김한결 (화학공학과, 포항공과대학교)
  • Dayeong Choi (Department of Chemical engineering, Pohang University of Science and Techonolgy) ;
  • Seyeong Lim (Department of Chemical engineering, Pohang University of Science and Techonolgy) ;
  • Hangyeol Kim (Department of Chemical engineering, Pohang University of Science and Techonolgy)
  • 투고 : 2023.02.14
  • 심사 : 2023.03.14
  • 발행 : 2023.03.31
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

Tin perovskite solar cells have attracted a lot of attention due to their potential to address the toxicity of lead, which is the biggest barrier to commercialization of perovskite solar cells. Unlike other lead-free perovskite, tin perovskite have a direct bandgap, which is suitable for use as light harvesting, and relatively good stability, which has led to a lot of attention. Since the first tin perovskite solar cell was reported in 2014, it has achieved an impressive power conversion efficiency of 14.81%. However, this efficiency is still low compared to that of lead perovskite solar cells, and the stability of tin perovskite solar cells is also an issue that needs to be addressed. In this review, we will discuss the basic properties of the tin atom in comparison to the lead atom, and then discuss the crystal structure, phase transition, and basic properties of tin perovskite. We will then discuss the advantages, applications, challenges, and strategies of tin perovskite, In particular, we will focus on how to prevent the oxidation of tin, which is arguably the biggest challenge for using tin perovskite solar cells. At the end, we summarize the key factors that need to be addressed for higher efficiency and stability, emphasizing what is needed to commercialize tin perovskite solar cells.

키워드

참고문헌

  1. Galkowski, Krzysztof, et al., "Determination of the exciton binding energy and effective masses for methylammonium and formamidinium lead tri-halide perovskite semiconductors," Energy & Environmental Science 9(3), 962-970 (2016). https://doi.org/10.1039/C5EE03435C
  2. De Wolf, Stefaan, et al., "Organometallic halide perovskites: sharp optical absorption edge and its relation to photovoltaic performance," The Journal of Physical Chemistry Letters 5(6), 1035-1039 (2014). https://doi.org/10.1021/jz500279b
  3. Herz, Laura M., "Charge-carrier mobilities in metal halide perovskites: fundamental mechanisms and limits," ACS Energy Letters 2(7), 1539-1548 (2017).
  4. Kulkarni, Sneha A., et al., "Band-gap tuning of lead halide perovskites using a sequential deposition process," Journal of Materials Chemistry A 2(24), 9221-9225 (2014). https://doi.org/10.1039/C4TA00435C
  5. Min, Hanul, et al., "Perovskite solar cells with atomically coherent interlayers on SnO2 electrodes," Nature 598(7881), 444-450 (2021). https://doi.org/10.1038/s41586-021-03964-8
  6. Yao, En-Ping, et al., "High-brightness blue and white leds based on inorganic perovskite nanocrystals and their composites," Advanced Materials 29(23), 1606859 (2017).
  7. Xing, Guichuan, et al., "Low-temperature solution-processed wavelength-tunable perovskites for lasing," Nature materials 13(5), 476-480 (2014). https://doi.org/10.1038/nmat3911
  8. Kojima, Akihiro, et al., "Organometal halide perovskites as visible-light sensitizers for photovoltaic cells," Journal of the American Chemical Society 131(17), 6050-6051 (2009). https://doi.org/10.1021/ja809598r
  9. Meng, Lei, Jingbi You, and Yang Yang, "Addressing the stability issue of perovskite solar cells for commercial applications," Nature Communications 9(1), 5265 (2018).
  10. Lee, Sang-Won, et al., "Historical analysis of high-efficiency, large-area solar cells: toward upscaling of perovskite solar cells," Advanced Materials 32(51), 2002202 (2020).
  11. Ara, Anjum, and Jawed Ahmad Usmani, "Lead toxicity: a review," Interdisciplinary Toxicology 8(2), 55-64 (2015). https://doi.org/10.1515/intox-2015-0009
  12. Liang, Lusheng and Peng, Gao, "Lead-free hybrid perovskite absorbers for viable application: can we eat the cake and have it too?" Advanced Science 5(2), 1700331 (2017).
  13. Hasan, Syed Azkar Ul, et al., "Present Status and Research Prospects of Tin-based Perovskite Solar Cells," Solar RRL 4(2), 1900310 (2020).
  14. Hoefler, Sebastian F., Gregor Trimmel, and Thomas Rath, "Progress on lead-free metal halide perovskites for photovoltaic applications: a review," Monatshefte fur Chemie-Chemical Monthly 148, 795-826 (2017). https://doi.org/10.1007/s00706-017-1933-9
  15. Pazoki, Meysam, et al., "Electronic structure of organic-inorganic lanthanide iodide perovskite solar cell materials," Journal of Materials Chemistry A 5(44), 23131-23138 (2017). https://doi.org/10.1039/C7TA07716E
  16. Pazoki, Meysam, et al., "Effect of metal cation replacement on the electronic structure of metalorganic halide perovskites: Replacement of lead with alkaline-earth metals," Physical Review B 93(14), 144105 (2016).
  17. Jacobsson, T. Jesper, et al., "Goldschmidt's rules and strontium replacement in lead halogen perovskite solar cells: theory and preliminary experiments on CH3NH3SrI3," The Journal of Physical Chemistry C 119(46), 25673-25683 (2015). https://doi.org/10.1021/acs.jpcc.5b06436
  18. Jin, Zhixin, et al., "A critical review on bismuth and antimony halide based perovskites and their derivatives for photovoltaic applications: recent advances and challenges," Journal of Materials Chemistry A 8(32), 16166-16188 (2020). https://doi.org/10.1039/D0TA05433J
  19. Shi, Zejiao, et al., "Lead-free organic-inorganic hybrid perovskites for photovoltaic applications: recent advances and perspectives," Advanced Materials 29(16), 1605005 (2017).
  20. Stoumpos, Constantinos C., et al., "Hybrid germanium iodide perovskite semiconductors: active lone pairs, structural distortions, direct and indirect energy gaps, and strong nonlinear optical properties," Journal of the American Chemical Society 137(21), 6804-6819 (2015). https://doi.org/10.1021/jacs.5b01025
  21. Macdonald, Thomas J., et al., "Engineering Stable Lead-free Tin Halide Perovskite Solar Cells: Lessons from Materials Chemistry," Advanced Materials 2206684 (2022).
  22. Yu, Bin-Bin, et al., "Heterogeneous 2D/3D tin-halides perovskite solar cells with certified conversion efficiency breaking 14%," Advanced Materials 33(36), 2102055 (2021).
  23. Jiang, Xianyuan, et al., "One-step synthesis of SnI2.(DMSO) x adducts for high-performance tin perovskite solar cells," Journal of the American Chemical Society 143(29), 10970-10976 (2021). https://doi.org/10.1021/jacs.1c03032
  24. Kieslich, Gregor, Shijing Sun, and Anthony K. Cheetham, "An extended tolerance factor approach for organic-inorganic perovskites," Chemical science 6(6), 3430-3433 (2015). https://doi.org/10.1039/C5SC00961H
  25. Stoumpos, Constantinos C., Christos D. Malliakas, and Mercouri G. Kanatzidis, "Semiconducting tin and lead iodide perovskites with organic cations: phase transitions, high mobilities, and near-infrared photoluminescent properties," Inorganic Chemistry 52(15), 9019-9038 (2013). https://doi.org/10.1021/ic401215x
  26. Hao, Feng, et al., "Anomalous band gap behavior in mixed Sn and Pb perovskites enables broadening of absorption spectrum in solar cells," Journal of the American Chemical Society 136(22), 8094-8099 (2014). https://doi.org/10.1021/ja5033259
  27. Gu, Feidan, et al., "Lead-free tin-based perovskite solar cells: strategies toward high performance," Solar RRL 3(9), 1900213 (2019).
  28. Leijtens, Tomas, et al., "Mechanism of tin oxidation and stabilization by lead substitution in tin halide perovskites," ACS Energy Letters 2(9), 2159-2165 (2017). https://doi.org/10.1021/acsenergylett.7b00636
  29. Huheey, James E., and Caroline L. Huheey, "Anomalous properties of elements that follow "long periods" of elements," Journal of Chemical Education 49(4), 227 (1972).
  30. Drago, Russell S., "Thermodynamic evaluation of the inert pair effect," The Journal of Physical Chemistry 62(3), 353-357 (1958). https://doi.org/10.1021/j150561a027
  31. Sanderson, R. T., "The inert-pair effect on electronegativity," Inorganic Chemistry 25(11), 1856-1858 (1986). https://doi.org/10.1021/ic00231a028
  32. Goldschmidt, V. M., "The laws of crystal chemistry," Naturwissenschaften 14(21), 477-485 (1926). https://doi.org/10.1007/BF01507527
  33. Li, Chonghea, et al., "Formability of ABX3 (X= F, Cl, Br, I) halide perovskites," Acta Crystallographica Section B: Structural Science 64(6), 702-707 (2008). https://doi.org/10.1107/S0108768108032734
  34. Pitaro, Matteo, et al., "Tin halide perovskites: from fundamental properties to solar cells," Advanced Materials 34(1), 2105844 (2022).
  35. Chowdhury, Towhid H., et al., "Sn-Based Perovskite Halides for Electronic Devices," Advanced Science 9(33), 2203749 (2022).
  36. Tai, Qidong, et al., "Recent advances toward efficient and stable tin-based perovskite solar cells," EcoMat. 1(1), e12004 (2019).
  37. Chung, In, et al., "CsSnI3: semiconductor or metal? High electrical conductivity and strong near-infrared photoluminescence from a single material. High hole mobility and phase-transitions," Journal of the American Chemical Society 134(20), 8579-8587 (2012). https://doi.org/10.1021/ja301539s
  38. Mei, Luyao, et al. "Hybrid Halide Perovskite-Based Near-Infrared Photodetectors and Imaging Arrays," Advanced Optical Materials 10(9), 2102656
  39. Kim, Bumseop, Jeongwoo Kim, and Noejung Park, "First-principles identification of the charge-shifting mechanism and ferroelectricity in hybrid halide perovskites," Scientific Reports 10(1), 19635 (2020).
  40. Bernal, Camille, and Kesong Yang, "First-principles hybrid functional study of the organic-inorganic perovskites CH3NH3SnBr3 and CH3NH3SnI3," The Journal of Physical Chemistry C 118(42), 24383-24388 (2014). https://doi.org/10.1021/jp509358f
  41. Tao, Shuxia, et al., "Absolute energy level positions in tin-and lead-based halide perovskites," Nature Communications 10(1), 2560 (2019).
  42. Diau, Eric Wei-Guang, Efat Jokar, and Mohammad Rameez, "Strategies to improve performance and stability for tin-based perovskite solar cells," ACS Energy Letters 4(8), 1930-1937. (2019) https://doi.org/10.1021/acsenergylett.9b01179
  43. Jokar, Efat, et al., "Robust tin-based perovskite solar cells with hybrid organic cations to attain efficiency approaching 10%," Advanced Materials 31(2), 1804835 (2019).
  44. Kubicki, Dominik J., et al., "Local structure and dynamics in methylammonium, formamidinium, and cesium tin (II) mixed-halide perovskites from 119Sn solid-state NMR," Journal of the American Chemical Society 142(17), 7813-7826 (2020). https://doi.org/10.1021/jacs.0c00647
  45. Babayigit, Aslihan, et al., "Assessing the toxicity of Pb-and Sn-based perovskite solar cells in model organism Danio rerio," Scientific Reports 6(1), 18721 (2016).
  46. Jeon, Il, et al., "Environmentally compatible lead-free perovskite solar cells and their potential as light harvesters in energy storage systems," Nanomaterials 11(8), 2066 (2021).
  47. Zhang, Tao, et al., "Minimizing energy loss in two-dimensional tin halide perovskite solar cells-A perspective," APL Materials 9(2), 020906 (2021). https://doi.org/10.34161/JOHTA.2021.9.2.005
  48. Lanzetta, Luis, et al., "Degradation mechanism of hybrid tin-based perovskite solar cells and the critical role of tin (IV) iodide," Nature Communications 12(1), 2853 (2021).
  49. Xiangrong, et al., "Stability improvement of tin-based halide perovskite by precursor-solution regulation with dual-functional reagents," Advanced functional materials 31(40), 2104344 (2021).
  50. Kumar, Mulmudi Hermant et al., "Lead-Free Halide Perovskite Solar Cells with High Photocurrents Realized Through Vacancy Modulation," Advanced Materials 26, 7122-7127 (2014). https://doi.org/10.1002/adma.201401991
  51. Lin, Renxing, et al., "Monolithic all-perovskite tandem solar cells with 24.8% efficiency exploiting comproportionation to suppress Sn (ii) oxidation in precursor ink," Nature Energy 4(10), 864-873 (2019). https://doi.org/10.1038/s41560-019-0466-3
  52. Johnston, Michael B., and Laura M. Herz, "Hybrid perovskites for photovoltaics: charge-carrier recombination, diffusion, and radiative efficiencies," Accounts of Chemical Research 49(1), 146-154 (2016). https://doi.org/10.1021/acs.accounts.5b00411
  53. Nakamura, Tomoya, et al., "Sn (IV)-free tin perovskite films realized by in situ Sn (0) nanoparticle treatment of the precursor solution," Nature Communications 11(1), 3008 (2020).
  54. Otero-Martinez, Clara, et al., "Fast A-Site Cation Cross-Exchange at Room Temperature: Single-to Double-and Triple-Cation Halide Perovskite Nanocrystals," Angewandte Chemie 134(34), e202205617
  55. Nakamura, Tomoya, et al., "Sn (IV)-free tin perovskite films realized by in situ Sn (0) nanoparticle treatment of the precursor solution," Nature Communications 11(1), 3008 (2020).
  56. Ke, Weijun, et al., "Enhanced photovoltaic performance and stability with a new type of hollow 3D perovskite {en} FASnI3," Science Advances 3(8), e1701293 (2017).
  57. Kayesh, Md. Emrul, et al., "Enhanced photovoltaic performance of FASnI3-based perovskite solar cells with hydrazinium chloride coadditive," ACS Energy Letters 3(7), 1584-1589 (2018). https://doi.org/10.1021/acsenergylett.8b00645
  58. Wang, Chengbo, et al., "Self-repairing tin-based perovskite solar cells with a breakthrough efficiency over 11%," Advanced Materials 32(31), 1907623 (2020).
  59. Song, Tze-Bin, et al., "Importance of reducing vapor atmosphere in the fabrication of tin-based perovskite solar cells," Journal of the American Chemical Society 139(2), 836-842 (2017). https://doi.org/10.1021/jacs.6b10734
  60. Dong, He, et al., "Crystallization Dynamics of Sn-Based Perovskite Thin Films: Toward Efficient and Stable Photovoltaic Devices," Advanced Energy Materials 12(1), 2102213 (2022).