과제정보
This research was financially supported by the Korea Institute of Energy Research (KIER) (grant no. C3-2401, 2402, 2403) and the National Research Foundation (grant no. 2022M3J1A1063019) funded by the Ministry of Science and ICT.
참고문헌
- Nakamura, M., et al., "Cd-free Cu(In,Ga)(Se,S)2 thin-film solar cell with record efficiency of 23.35%," IEEE Journal of Photovoltaics, 9(6), 863-1867 (2019). https://doi.org/10.1109/JPHOTOV.2019.2937218
- Empa, "21.4% record efficiency for flexible solar cells," 2021, [cited 2023-03-10]; Available from: https://www.empa.ch/web/s604/cigs-efficiency-record-2021
- MiaSole', "New World Record Efficiency with Flexible CIGS Solar Cell," 2019[cited 2023-02-04]; Available from: https://miasole.com/new-world-record-efficiency-with-flexible-cigs-solar-cell/.
- Gloeckler, M. and J.Sites, "Band-gap grading in Cu(In,Ga)Se2 solar cells," Journal of Physics and Chemistry of Solids, 66(11), 1891-1894 (2005). https://doi.org/10.1016/j.jpcs.2005.09.087
- Aboulfadl, H., et al., "Alkali Dispersion in (Ag,Cu)(In,Ga)Se2 Thin Film Solar Cells-Insight from Theory and Experiment," ACS applied materials & interfaces, 13(6), 7188-7199 (2021). https://doi.org/10.1021/acsami.0c20539
- Muzzillo, C.P., H.M. Tong, and T. Anderson, "Chemistry of K in Cu(In,Ga)Se2 photovoltaic absorbers: effects of temperature on Cu-K-In-Se films," Journal of Alloys and Compounds, 726, 538-546 (2017). https://doi.org/10.1016/j.jallcom.2017.08.019
- Khatri, I., et al., "Effect of potassium fluoride post-deposition treatment on Cu(In,Ga)Se2 thin films and solar cells fabricated onto soda lime glass substrates," Solar Energy Materials and Solar Cells, 155, 280-287 (2016). https://doi.org/10.1016/j.solmat.2016.06.023
- Kim, K., et al., "Ag incorporation in low-temperature grown Cu(In,Ga)Se2 solar cells using Ag precursor layers," Solar Energy Materials and Solar Cells, 146, 114-120 (2016). https://doi.org/10.1016/j.solmat.2015.11.028
- Kim, G., et al., "Thin Ag precursor layer-assisted co-evaporation process for low-temperature growth of Cu(In,Ga)Se2 thin film," ACS applied materials & interfaces, 11(35), 31923-31933 (2019). https://doi.org/10.1021/acsami.9b09253
- Wang, Y., S. Lv, and Z. Li, "Review on incorporation of alkali elements and their effects in Cu(In,Ga)Se2 solar cells," Journal of Materials Science & Technology, 96, 179-189 (2022). https://doi.org/10.1016/j.jmst.2020.07.050
- Simchi, H., et al., "An Investigation of the Surface Properties of (Ag,Cu)(In,Ga)Se2 Thin Films," IEEE Journal of Photovoltaics, 2(4), 519-523 (2012). https://doi.org/10.1109/JPHOTOV.2012.2204391
- Kim, K., et al., "Highly efficient Ag-alloyed Cu(In,Ga)Se2 solar cells with wide bandgaps and their application to chalcopyritebased tandem solar cells," Nano Energy, 48, 345-352 (2018). https://doi.org/10.1016/j.nanoen.2018.03.052
- Heath, J. and P. Zabierowski, "Capacitance spectroscopy of thin-film solar cells," Advanced characterization techniques for thin-film solar cells", 81-105 (2011).
- Yu, H.J., et al., "Light-soaking effects and capacitance profiling in Cu(In,Ga)Se2 thin-film solar cells with chemical-bath-deposited ZnS buffer layers," Physical Chemistry Chemical Physics, 18(48), 33211-33217 (2016). https://doi.org/10.1039/C6CP05306H
- Babbe, F., et al., "Potassium fluoride postdeposition treatment with etching step on both Cu-rich and Cu-poor CuInSe2 thin film solar cells," Physical Review Materials, 2(10), 105405 (2018).