Smart Structures and Systems

  • 제31권2호
  • /
  • Pages.101-111
  • /
  • 2023
  • /
  • 1738-1584(pISSN)
  • /
  • 1738-1991(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Accuracy and robustness of hysteresis loop analysis in the identification and monitoring of plastic stiffness for highly nonlinear pinching structures

  • Hamish Tomlinson (Department of Mechanical Engineering, University of Canterbury) ;
  • Geoffrey W. Rodgers (Department of Mechanical Engineering, University of Canterbury) ;
  • Chao Xu (Department of Mechanical Engineering, University of Canterbury) ;
  • Virginie Avot (Department of Mechanical Engineering, University of Canterbury) ;
  • Cong Zhou (Department of Mechanical Engineering, University of Canterbury) ;
  • J. Geoffrey Chase (Department of Mechanical Engineering, University of Canterbury)
  • 투고 : 2020.12.30
  • 심사 : 2022.09.22
  • 발행 : 2023.02.25
⟨ 이전 논문 다음 논문 ⟩

초록

Structural health monitoring (SHM) covers a range of damage detection strategies for buildings. In real-time, SHM provides a basis for rapid decision making to optimise the speed and economic efficiency of post-event response. Previous work introduced an SHM method based on identifying structural nonlinear hysteretic parameters and their evolution from structural force-deformation hysteresis loops in real-time. This research extends and generalises this method to investigate the impact of a wide range of flag-shaped or pinching shape nonlinear hysteretic response and its impact on the SHM accuracy. A particular focus is plastic stiffness (Kp), where accurate identification of this parameter enables accurate identification of net and total plastic deformation and plastic energy dissipated, all of which are directly related to damage and infrequently assessed in SHM. A sensitivity study using a realistic seismic case study with known ground truth values investigates the impact of hysteresis loop shape, as well as added noise, on SHM accuracy using a suite of 20 ground motions from the PEER database. Monte Carlo analysis over 22,000 simulations with different hysteresis loops and added noise resulted in absolute percentage identification error (median, (IQR)) in Kp of 1.88% (0.79, 4.94)%. Errors were larger where five events (Earthquakes #1, 6, 9, 14) have very large errors over 100% for resulted Kp as an almost entirely linear response yielded only negligible plastic response, increasing identification error. The sensitivity analysis shows accuracy is reduces to within 3% when plastic drift is induced. This method shows clear potential to provide accurate, real-time metrics of non-linear stiffness and deformation to assist rapid damage assessment and decision making, utilising algorithms significantly simpler than previous non-linear structural model-based parameter identification SHM methods.

키워드

참고문헌

  1. Adeli, H. and Jiang, X. (2006), "Dynamic fuzzy wavelet neural network model for structural system identification", J. Struct. Eng., 132, 102-111. DOI: 10.1061/(ASCE)0733-9445(2006)132:1(102)
  2. Attanasi, G., Auricchio, F. and Fenves, G.L. (2009), "Feasibility assessment of an innovative isolation bearing system with shape memory alloys", J. Earthq. Eng., 13, 18-39. https://doi.org/10.1080/13632460902813216
  3. Baber, T.T. and Noori, M.N. (1985), "Random vibration of degrading, pinching systems", J. Eng. Mech., 111, 1010-1026. https://doi.org/10.1061/(ASCE)0733-9399(1985)111:8(1010)
  4. Bao, C., Hao, H. and Li, Z. (2013), "Vibration-based health monitoring of offshore pipelines: numerical and experimental study", Struct. Control Health Monitor., 20, 769-788. https://doi.org/10.1002/stc.1494
  5. Bernal, D. and Gunes, B. (2000), "Observer/Kalman and subspace identification of the UBC benchmark structural model", Proceedings of the 14th ASCE Engineering Mechanics Conference, Austin, TX, USA, pp. 21-24.
  6. Boore, D.M. and Bommer, J.J. (2005), "Processing of strong-motion accelerograms: needs, options and consequences", Soil Dyn. Earthq. Eng., 25, 93-115. https://doi.org/10.1016/j.soildyn.2004.10.007
  7. Brownjohn, J.M. (2007), "Structural health monitoring of civil infrastructure", Philosoph. Transact. Royal Soc. A: Mathe. Phys. Eng. Sci., 365, 589-622. https://doi.org/10.1098/rsta.2006.1925
  8. Brownjohn, J.M.W., Raby, A., Au, S.-K., Zhu, Z., Wang, X., Antonini, A., Pappas, A. and D'ayala, D. (2019), "Bayesian operational modal analysis of offshore rock lighthouses: Close modes, alignment, symmetry and uncertainty", Mech. Syst. Signal Process., 133, 106306. https://doi.org/10.1016/j.ymssp.2019.106306
  9. Carr, A.J. (2005), RUAUMOKO program for inelastic dynamic analysis: user manual, Department of Civil Engineering, University of Canterbury, Christchurch, New Zealand.
  10. Chang, P.C., Flatau, A. and Liu, S. (2003), "Health monitoring of civil infrastructure", Struct. Health Monitor., 2, 257-267. https://doi.org/10.1177/1475921703036169
  11. Chase, J.G., Hwang, K.L., Barroso, L.R. and Mander, J.B. (2005), "A simple LMS-based approach to the structural health monitoring benchmark problem", Earthq. Eng. Struct. Dyn., 34, 575-594. https://doi.org/10.1002/eqe.433
  12. Chen, B., Zhao, S.-L. and Li, P.-Y. (2014), "Application of Hilbert-Huang transform in structural health monitoring: a state-of-the-art review", Mathe. Problems Eng., 2014. https://doi.org/10.1155/2014/317954
  13. Chopra, A.K. (1995), Dynamics of Structures: Theory and Applications to Earthquake Engineering, Prentice Hall, Upper Saddle River, NJ, USA.
  14. Chopra, A.K. (2012), Dynamics of Structures, Pearson Education Upper Saddle River, NJ, USA.
  15. Christopoulos, C., Filiatrault, A. and Folz, B. (2002), "Seismic response of self-centring hysteretic SDOF systems", Earthq. Eng. Struct. Dyn., 31, 1131-1150. https://doi.org/10.1002/eqe.152
  16. Christopoulos, C., Pampanin, S. and Nigel Priestley, M. (2003), "Performance-based seismic response of frame structures including residual deformations part I: single-degree of freedom systems", J. Earthq. Eng., 7, 97-118. https://doi.org/10.1142/S1363246903000894
  17. Christopoulos, C., Tremblay, R., Kim, H.-J. and Lacerte, M. (2008), "Self-centering energy dissipative bracing system for the seismic resistance of structures: development and validation", J. Struct. Eng., 134, 96-107. https://doi.org/10.1061/(ASCE)0733-9445(2008)134:1(96)
  18. De Lautour, O.R. and Omenzetter, P. (2010), "Damage classification and estimation in experimental structures using time series analysis and pattern recognition", Mech. Syst. Signal Process., 24, 1556-1569. https://doi.org/10.1016/j.ymssp.2009.12.008
  19. Doebling, S.W., Farrar, C.R., Prime, M.B. and Shevitz, D.W. (1996), "Damage identification and health monitoring of structural and mechanical systems from changes in their vibration characteristics: a literature review", Los Alamos National Lab., NM, USA.
  20. Doherty, J.E. (1987), "Non-destructive evaluation", In: Kobayashi, A.S. (ed.), Handbook on Experimental Mechanics, (1st ed.) Prentice-Hall, Inc., Englewood Cliffs, NJ, USA.
  21. Fan, W. and Qiao, P. (2011), "Vibration-based damage identification methods: a review and comparative study", Struct. Health Monitor., 10, 83-111. https://doi.org/10.1177/1475921710365419
  22. Favvata, M.J. and Karayannis, C.G. (2014), "Influence of pinching effect of exterior joints on the seismic behavior of RC frames", Earthq. Struct., Int. J., 6(1), 89-110. https://doi.org/10.12989/eas.2014.6.1.089
  23. Feng, D. and Feng, M.Q. (2017), "Identification of structural stiffness and excitation forces in time domain using noncontact vision-based displacement measurement", J. Sound Vib., 406, 15-28. https://doi.org/10.1016/j.jsv.2017.06.008
  24. Feng, D. and Feng, M.Q. (2018), "Computer vision for SHM of civil infrastructure: From dynamic response measurement to damage detection-A review", Eng. Struct., 156, 105-117. https://doi.org/10.1016/j.engstruct.2017.11.018
  25. Foliente, G.C. and Noori, M.N. (1996), "Equivalent linearization of generally pinching hysteretic, degrading systems", Earthq. Eng. Struct. Dyn., 25, 611-629. https://doi.org/10.1002/(SICI)1096-9845(199606)25:6<611::AID-EQE572>3.0.CO;2-S
  26. Ginsberg, D., Fritzen, C.-P. and Loffeld, O. (2018), "Sparsity-constrained extended Kalman filter concept for damage localization and identification in mechanical structures", Smart Struct. Syst., Int. J., 21(6), 741-749. https://doi.org/10.12989/sss.2018.21.6.741
  27. Hann, C.E., Singh-Levett, I., Deam, B.L., Mander, J.B. and Chase, J.G. (2009), "Real-time system identification of a nonlinear four-story steel frame structure-application to structural health monitoring", IEEE Sensors J., 9, 1339-1346. https://doi.org/10.1109/JSEN.2009.2022434
  28. Hannan, M.A., Hassan, K. and Jern, K.P. (2018), "A review on sensors and systems in structural health monitoring: current issues and challenges", Smart Struct. Syst., Int. J., 22(5), 509-525. https://doi.org/10.12989/sss.2018.22.5.509
  29. Hou, Z., Noori, M. and Amand, R.S. (2000), "Wavelet-based approach for structural damage detection", J. Eng. Mech., 126, 677-683. https://doi.org/10.1061/(ASCE)0733-9399(2000)126:7(677)
  30. Hou, Z., Hera, A. and Shinde, A. (2006), "Wavelet-based structural health monitoring of earthquake excited structures. Computer-Aided Civil and Infrastructure Engineering, 21, 268-279. https://doi.org/10.1111/j.1467-8667.2006.00434.x
  31. Huang, Q.D., Gardoni, P. and Hurlebaus, S. (2012), "A probabilistic damage detection approach using vibration-based nondestructive testing", Struct. Safety, 38, 11-21. https://doi.org/10.1016/j.strusafe.2012.01.004
  32. Hung, S.L., Huang, C., Wen, C. and Hsu, Y. (2003), "Nonparametric identification of a building structure from experimental data using wavelet neural network", Comput.-Aided Civil Infrastr. Eng., 18, 356-368. https://doi.org/10.1111/1467-8667.t01-1-00313
  33. Iemura, H. and Jennings, P. (1974), "Hysteretic response of a nine-storey reinforced concrete building", Earthq. Eng. Struct. Dyn., 3, 183-201. https://doi.org/10.1002/eqe.4290030207
  34. Iwan, W.D. and Cifuentes, A.O. (1986), "A model for system identification of degrading structures", Earthq. Eng. Struct. Dyn., 14, 877-890. https://doi.org/10.1002/eqe.4290140605
  35. Jeen-Shang, L. and Yigong, Z. (1994), "Nonlinear structural identification using extended Kalman filter", Comput. Struct., 52, 757-764. https://doi.org/10.1016/0045-7949(94)90357-3
  36. Jesus, A., Brommer, P., Westgate, R., Koo, K., Brownjohn, J. and Laory, I. (2019), "Modular Bayesian damage detection for complex civil infrastructure", J. Civil Struct. Health Monitor., 9, 201-215. https://doi.org/10.1007/s13349-018-00321-8
  37. Jiang, X. and Adeli, H. (2005), "Dynamic wavelet neural network for nonlinear identification of highrise buildings", Comput.-Aided Civil Infrastr. Eng., 20, 316-330. https://doi.org/10.1111/j.1467-8667.2005.00399.x
  38. Kao, C.Y. and Loh, C.H. (2013), "Monitoring of long-term static deformation data of Fei-Tsui arch dam using artificial neural network-based approaches", Struct. Control Health Monitor., 20, 282-303. https://doi.org/10.1002/stc.492
  39. Kunnath, S.K., Mander, J.B. and Fang, L. (1997), "Parameter identification for degrading and pinched hysteretic structural concrete systems", Eng. Struct., 19, 224-232. https://doi.org/10.1016/S0141-0296(96)00058-2
  40. Kunwar, A., Jha, R., Whelan, M. and Janoyan, K. (2013), "Damage detection in an experimental bridge model using Hilbert-Huang transform of transient vibrations", Struct. Control Health Monitor., 20, 1-15. https://doi.org/10.1002/stc.466
  41. Lin, S., Yang, J.N. and Zhou, L. (2005), "Damage identification of a benchmark building for structural health monitoring", Smart Mater. Struct., 14, S162. https://doi.org/10.1088/0964-1726/14/3/019
  42. Loh, C.-H., Lin, C.-Y. and Huang, C.-C. (2000), "Time domain identification of frames under earthquake loadings", J. Eng. Mech., 126, 693-703. https://doi.org/10.1061/(ASCE)0733-9399(2000)126:7(693)
  43. Nayyerloo, M., Chase, J., Macrae, G. and Chen, X. (2011), "LMS-based approach to structural health monitoring of nonlinear hysteretic structures", Struct. Health Monitor., 10, 429-444. https://doi.org/10.1177/1475921710379519
  44. Ozbulut, O.E. and Hurlebaus, S. (2010), "Seismic assessment of bridge structures isolated by a shape memory alloy/rubber-based isolation system", Smart Mater. Struct., 20, 015003. https://doi.org/10.1088/0964-1726/20/1/015003
  45. Pampanin, S., Christopoulos, C. and Nigel Priestley, M. (2003), "Performance-based seismic response of frame structures including residual deformations part II: multi-degree of freedom systems", J. Earthq. Eng., 7, 119-147. https://doi.org/10.1142/S1363246903000900
  46. Pan, S., Xiao, D., Xing, S., Law, S., Du, P. and Li, Y. (2016), "A general extended Kalman filter for simultaneous estimation of system and unknown inputs", Eng. Struct., 109, 85-98. https://doi.org/10.1016/j.engstruct.2015.11.014
  47. Park, S., Park, H.S., Kim, J. and Adeli, H. (2015), "3D displacement measurement model for health monitoring of structures using a motion capture system", Measurement, 59, 352-362. https://doi.org/10.1016/j.measurement.2014.09.063
  48. Peer (2005), "Pacific Earthquake Engineering Research Center (PEER) Strong Motion Database [Online], Pacific Earthquake Engineering Research Center, CA, USA. Available: https://peer.berkeley.edu/peer-strong-ground-motion-databases [Accessed January 5 2021]
  49. Pines, D. and Salvino, L. (2006), "Structural health monitoring using empirical mode decomposition and the Hilbert phase", J. Sound Vib., 294, 97-124. https://doi.org/10.1016/j.jsv.2005.10.024
  50. Poskus, E., Rodgers, G.W. and Chase, J.G. (2020), "Output-only modal parameter identification of systems subjected to various types of excitation", J. Eng. Mech., 146, 04020129. https://doi.org/10.1061/(ASCE)EM.1943-7889.0001853
  51. Rabiepour, M., Zhou, C., Rodgers, G.W. and Chase, J.G. (2022), "Real-world application of hysteresis loop analysis for stiffness identification of an instrumented building across multiple seismic events", J. Build. Eng., 45, 103524. https://doi.org/10.1016/j.jobe.2021.103524
  52. Rodgers, G., Solberg, K., Chase, J., Mander, J., Bradley, B., Dhakal, R. and Li, L. (2008), "Performance of a damage-protected beam-column subassembly utilizing external HF2V energy dissipation devices", Earthquake Engineering & Structural Dynamics (EESD), 37, 1549-1564. https://doi.org/10.1002/eqe.830
  53. Rodgers, G.W., Mander, J.B. and Chase, J.G. (2011), "Semi-explicit rate-dependent modeling of damage-avoidance steel connections using HF2V damping devices", Earthq. Eng. Struct. Dyn., 40, 977-992. https://doi.org/10.1002/eqe.1073
  54. Rodgers, G.W., Solberg, K.M., Mander, J.B., Chase, J.G., Bradley, B.A. and Dhakal, R.P. (2012), "High-force-to-volume seismic dissipators embedded in a jointed precast concrete frame", J. Struct. Eng., 138, 375-386. https://doi.org/10.1061/(ASCE)ST.1943-541X.0000329
  55. Sato, T. and Qi, K. (1998), "Adaptive H∞ filter: Its application to structural identification", J. Eng. Mech., 124, 1233-1240. https://doi.org/10.1061/(ASCE)0733-9399(1998)124:11(1233)
  56. Sivaselvan, M.V. and Reinhorn, A.M. (2000), "Hysteretic models for deteriorating inelastic structures", J. Eng. Mech., 126, 633-640. https://doi.org/10.1061/(ASCE)0733-9399(2000)126:6(633)
  57. Skolnik, D.A. and Wallace, J.W. (2010), "Critical assessment of interstory drift measurements", J. Struct. Eng., 136, 1574-1584. https://doi.org/10.1061/(ASCE)ST.1943-541X.0000255
  58. Sohn, H., Farrar, C.R., Hemez, F.M., Shunk, D.D., Stinemates, D.W., Nadler, B.R. and Czarnecki, J.J. (2004), "A Review of Structural Health Monitoring Literature: 1996-2001", Los Alamos National Laboratory.
  59. Stephens, J.E. and Yao, J.T. (1987), "Damage assessment using response measurements", J. Struct. Eng., 113, 787-801. https://doi.org/10.1061/(ASCE)0733-9445(1987)113:4(787)
  60. Sun, K., Zhang, W., Ding, H., Kim, R.E. and Spencer, B.F. (2017), "Autonomous evaluation of ambient vibration of underground spaces induced by adjacent subway trains using high-sensitivity wireless smart sensors", Smart Struct. Syst., Int. J., 19(1), 1-10. https://doi.org/10.12989/sss.2017.19.1.001
  61. Taha, M.R., Noureldin, A., Lucero, J. and Baca, T. (2006), "Wavelet transform for structural health monitoring: a compendium of uses and features", Struct. Health Monitor., 5, 267-295. https://doi.org/10.1177/1475921706067741
  62. Toussi, S. and Yao, J.T. (1983), "Hysteresis identification of existing structures", J. Eng. Mech., 109, 1189-1202. https://doi.org/10.1061/(ASCE)0733-9399(1983)109:5(1189)
  63. Tremblay, R., Lacerte, M. and Christopoulos, C. (2008), "Seismic response of multistory buildings with self-centering energy dissipative steel braces", J. Struct. Eng., 134, 108-120. https://doi.org/10.1061/(ASCE)0733-9445(2008)134:1(108)
  64. Vamvatsikos, D. and Cornell, C.A. (2002), "Incremental dynamic analysis", Earthq. Eng. Struct. Dyn., 31, 491-514. https://doi.org/10.1002/eqe.141
  65. Wen, Y.-K. (1976), "Method for random vibration of hysteretic systems", J. Eng. Mech. Div., 102, 249-263. https://doi.org/10.1061/JMCEA3.0002106
  66. Wrzesniak, D., Rodgers, G.W., Fragiacomo, M. and Chase, J.G. (2016), "Experimental testing of damage-resistant rocking glulam walls with lead extrusion dampers", Constr. Build. Mater., 102, 1145-1153. https://doi.org/10.1016/j.conbuildmat.2015.09.011
  67. Wu, M. and Smyth, A. (2008), "Real-time parameter estimation for degrading and pinching hysteretic models", Int. J. Non-Linear Mech., 43, 822-833. https://doi.org/10.1016/j.ijnonlinmec.2008.05.010
  68. Wu, Z., Xu, B. and Yokoyama, K. (2002), "Decentralized parametric damage detection based on neural networks", Comput.-Aided Civil Infrastr. Eng., 17, 175-184. https://doi.org/10.1111/1467-8667.00265
  69. Xiong, H.-B., Cao, J.-X., Zhang, F.-L., Ou, X. and Chen, C.-J. (2019), "Investigation of the SHM-oriented model and dynamic characteristics of a super-tall building", Smart Struct. Syst., Int. J., 23(3), 295-306. https://doi.org/10.12989/sss.2019.23.3.295
  70. Xu, Y. and Brownjohn, J.M. (2018), "Review of machine-vision based methodologies for displacement measurement in civil structures", J. Civil Struct. Health Monitor., 8, 91-110. https://doi.org/10.1007/s13349-017-0261-4
  71. Xu, C., Chase, J.G. and Rodgers, G.W. (2014), "Physical parameter identification of nonlinear base-isolated buildings using seismic response data", Comput. Struct., 145, 47-57. https://doi.org/10.1016/j.compstruc.2014.08.006
  72. Yang, J.N., Lei, Y., Lin, S. and Huang, N. (2004), "Hilbert-Huang based approach for structural damage detection", J. Eng. Mech., 130, 85-95. https://doi.org/10.1061/(ASCE)0733-9399(2004)130:1(85)
  73. Yang, J.N., Lin, S., Huang, H. and Zhou, L. (2006), "An adaptive extended Kalman filter for structural damage identification", Struct. Control Health Monitor., 13, 849-867. https://doi.org/10.1002/stc.84
  74. Yang, J., Pan, S. and Huang, H. (2007), "An adaptive extended Kalman filter for structural damage identifications II: unknown inputs", Struct. Control Health Monitor., 14, 497-521. https://doi.org/10.1002/stc.171
  75. Yang, J.N., Xia, Y. and Loh, C.-H. (2014), "Damage detection of hysteretic structures with a pinching effect", J. Eng. Mech., 140, 462-472. https://doi.org/10.1061/(ASCE)EM.1943-7889.0000581
  76. Ye, X., Su, Y. and Han, J. (2014), "Structural health monitoring of civil infrastructure using optical fiber sensing technology: A comprehensive review", Scient. World J., 2014. https://doi.org/10.1155/2014/652329
  77. Ye, X., Yi, T.-H., Dong, C., Liu, T. and Bai, H. (2015), "Multi-point displacement monitoring of bridges using a vision-based approach", Wind Struct., Int. J., 20(2), 315-326. https://doi.org/10.12989/was.2015.20.2.315
  78. Ye, X., Yi, T.-H., Su, Y., Liu, T. and Chen, B. (2017), "Strain-based structural condition assessment of an instrumented arch bridge using FBG monitoring data", Smart Struct. Syst., Int. J., 20(2), 139-150. https://doi.org/10.12989/sss.2017.20.2.139
  79. Ye, X., Jin, T. and Yun, C. (2019), "A review on deep learningbased structural health monitoring of civil infrastructures", Smart Struct. Syst., Int. J., 24(5), 567-585. https://doi.org/10.12989/sss.2019.24.5.567
  80. Yu, J., Yu, K., Shang, X. and Lu, Z. (2016), "New Extended Finite Element Method for Pinching Effect in Reinforced Concrete Columns", ACI Struct. J., 113(4), 689-699. https://doi.org/10.14359/51688747
  81. Zhou, C., Chase, J.G., Rodgers, G.W., Kuang, A., Gutschmidt, S. and Xu, C. (2015a), "Performance evaluation of CWH base isolated building during two major earthquakes in Christchurch", Bull. New Zealand Soc. Earthq. Eng., 48, 264-273. https://doi.org/10.5459/bnzsee.48.4.264-273
  82. Zhou, C., Chase, J.G., Rodgers, G.W., Tomlinson, H. and Xu, C. (2015b), "Physical parameter identification of structural systems with hysteretic pinching", Comput.-Aided Civil Infrastr. Eng., 30, 247-262. https://doi.org/10.1111/mice.12108
  83. Zhou, C., Chase, J.G., Rodgers, G.W., Xu, C. and Tomlinson, H. (2015c), "Overall damage identification of flag-shaped hysteresis systems under seismic excitation", Smart Struct. Syst., Int. J., 16(1), 163-181. https://doi.org/10.12989/sss.2015.16.1.163
  84. Zhou, C., Chase, J.G. and Rodgers, G.W. (2017a), "Efficient hysteresis loop analysis-based damage identification of a reinforced concrete frame structure over multiple events", J. Civil Struct. Health Monitor., 7, 541-556. https://doi.org/10.1007/s13349-017-0241-8
  85. Zhou, C., Chase, J.G., Rodgers, G.W. and Iihoshi, C. (2017b), "Damage assessment by stiffness identification for a full-scale three-story steel moment resisting frame building subjected to a sequence of earthquake excitations", Bull. Earthq. Eng., 15, 5393-5412. https://doi.org/10.1007/s10518-017-0190-y
  86. Zhou, C., Chase, J.G., Rodgers, G.W. and Xu, C. (2017c), "Comparing model-based adaptive LMS filters and a modelfree hysteresis loop analysis method for structural health monitoring", Mech. Syst. Signal Process., 84, 384-398. https://doi.org/10.1016/j.ymssp.2016.07.030