과제정보
이 연구는 2023년도 광주대학교 대학 연구비의 지원을 받아 수행되었음.
참고문헌
- Martini-Vvedensky,J.E., Suh, N.P. and Waldman, F.A, "Microcellular closed cell foams and their method of manufacture", U. S. Patent No. 4,473,665, 1984.
- Bledzki, A.K., Rohleder, M., Kirschling, H. and Chate, A., "Correlation between morphology and notched impact strength of microcellular foamed polycarbonate",Journal of cellular plastics, Vol. 46, No. 5, pp. 415-440, 2010. https://doi.org/10.1177/0021955X10368332
- Roch, A., Huber, T., Henning, F. and Elsner, P., "LFT foam-lightweight potential for semi-structural components through the use of long-glass-fiber-reinforced thermoplastic foams", In AIP Conference Proceedings, Vol. 1593, No. 1, pp. 471-476, 2014.
- Ding, Y., Hassan, M.H., Bakker, O., Hinduja, S. and Bartolo, P., "A Review on Microcellular Injection Moulding", Materials, Vol. 14(15), 4209, 2021. https://doi.org/10.3390/ma14154209
- Turng, L.S. and Kharbas, H., "Development of a hybrid solid-microcellular co-injection molding process", International polymer processing, Vol. 19, No. 1, pp. 77-86, 2004. https://doi.org/10.3139/217.1806
- Suhartono,E.,Chen,S.C.,Chang, Y.H.,Chang,J.A. and Lee, K.H., "Improvement on the surface quality of microcellular injection molded parts using microcellular co-injection molding with the material combinations of PP and PP-GF", International Journal of Plastics Technology, Vol. 21, No. 2, pp. 239-251, 2017. https://doi.org/10.1007/s12588-017-9182-7
- Ren,J.,Lin,L.,Jiang,J.,Li, Q. and Hwang, S.S., "Effect of Gas Counter Pressure on the Surface Roughness, Morphology, and Tensile Strength between Microcellular and Conventional Injection-Molded PP Parts", Polymers, Vol. 14(6), 1078, 2022. https://doi.org/10.3390/polym14061078
- Lee, J.W., Lee, R.E., Wang, J., Jung, P.U. and Park, C.B., "Study of the foaming mechanisms associated with gas counter pressure and mold opening using the pressure profiles",Chemical Engineering Science, Vol. 167, pp. 105-119, 2017. https://doi.org/10.1016/j.ces.2017.04.005
- Chang, Y.H., Chiu, M.C., Chen, S.C., Chang, C.W. and Tseng, C.Y., "Establishing a rapid cooling complex mold design for the quality improvement of microcellular injection molding", Polymer Engineering & Science, Vol. 60(12), pp. 3072-3085, 2020. https://doi.org/10.1002/pen.25538
- Lee,J. and Turng, L. S., "Improving surface quality of microcellular injection molded parts through mold surface temperature manipulation with thin film insulation", Polymer Engineering & Science, Vol. 50(7), pp. 1281-1289, 2010. https://doi.org/10.1002/pen.21658
- Lee,J., Turng, L.S., Dougherty, E. and Gorton, P., "A novel method for improving the surface quality of microcellular injection molded parts", Polymer, Vol. 52(6), pp. 1436-1446, 2011. https://doi.org/10.1016/j.polymer.2011.01.026
- Wu, H., Wintermantel, E. and Haugen, H.J., "The effects of mold design on the pore morphology of polymers produced with MuCell® Technology",Journal of Cellular Plastics, Vol. 46(6), pp. 519-530, 2010. https://doi.org/10.1177/0021955X10376454
- Ding, Y., Vyas, C., Bakker, O., Hinduja, S. and Bartolo,P., "Modelling and Simulation of MuCell®: The Effect of Key Processing Parameters on Cell Size and Weight Reduction", Polymers, Vol. 14(19), 4215, 2022. https://doi.org/10.3390/polym14194215
- Kim. J., Kwak. J., Kim. J., Lee. J. and Kim. J., "study on the process optimization of microcellular foaming injection molded air-conditioner drain pen", Journal of Korea Society of Die & Mold Engineering, Vol. 11(2), pp. 1-8, 2017.
- Menges, G., Michaeli, W. and Mohren, P., "How to Make Injection Molds", Third Edition, Cal Hanser Verlag, Munich, Germany, pp. 152-160, 2001.
- Wang, G.L., Zhao, G.Q., Wang, J.C. and Zhang, L., "Research on formation mechanisms and control of external and inner bubble morphology in microcellular injection molding", Polymer Engineering & Science, Vol. 55(4), pp. 807-835, 2015. https://doi.org/10.1002/pen.23948
- Cakir. S., Aycicek. M., Altun. E. and Akinci. A., "The effect of foaming agent on mechanical and physical properties of Polypropylene", Materials Science Advanced Composite Materials, Vol. 2(1), pp. 1-7, 2018. https://doi.org/10.18063/msacm.v2i1.693
- Menges, G., Michaeli, W. and Mohren, P., "How to Make Injection Molds", Third Edition, Cal Hanser Verlag, Munich, Germany, pp. 205-207, 2001.
- Li, S., Zhao, G., Dong, G. and Wang, J., "Study on reducing sink mark depth of a microcellular injection molded part with many reinforcing ribs", Journal of Cellular Plastics, Vol. 52(5), pp. 479-502, 2016. https://doi.org/10.1177/0021955X15579244