DOI QR코드

DOI QR Code

콘크리트 투수블록의 특성평가를 위한 모사 협잡물의 제안

Proposal of Simulated Road Scattering Dust on the Properties of Concrete Permeable Blocks

  • Park, Jun-Seo (Dept. of Architectural Engineering, Kyonggi University) ;
  • Yang, Keun-Hyeok (Dept. of Architectural Engineering, Kyonggi University)
  • 투고 : 2022.10.12
  • 심사 : 2023.01.03
  • 발행 : 2023.02.28

초록

This study proposes simulated road scattering dust that factor particle distribution and air-dried density of actual road scattering dust sampled from roads in the Seoul Metropolitan City. The simulated road scattering dust was combined in weight ratios of 22% ISO standard sand, 40% blow sand, and 38% arizona dust. The particle distribution and air-dried density of actual road scattering dust was closely similar to those of the sampled ones. The permeable coefficient and porosity of concrete permeable blocks after covering with the simulated road scattering dust were 0.5 mm/s and 15.2%, which was 18% and 8% lower than those of the concrete permeable blocks before covering. These trends were similar to those obtained from the concrete permeable blocks covered with the dust specified in the Seoul Metropolitan City. The permeable coefficient of concrete permeable blocks covered by dust specified in the Seoul Metropolitan City was 0.31 mm/s, which was 38% lower than that of the blocks covered with the simulated road scattering dust. Consequently, the simulated road scattering dust can be used to reasonably investigate properties relevant to the permeability coefficient of concrete permeable block because it reflects particle distribution of actual road scattering dust.

키워드

과제정보

이 연구는 2023년도 중소벤처기업부 "구매조건부신제품개발사업" 지원에 의하여 수행된 연구사업임. 과제번호: No. S3302880

참고문헌

  1. Hong, C. (2007). Understanding the affect of preliminary disaster inspection and consultation system, Journal of Korean Society of Civil Engineering, 54(5), 21-27.
  2. ISO 12103-1 (2016). Defines particle size distribution and chemical content limits involving four grades of test dust made from Arizona desert sand, International Standard.
  3. ISO 679 (2009). Specifies a method of determining the compressive and, optionally, the flexural strength of cement mortar containing one part by mass of cement, three parts by mass of ISO standard sand and one half part of water, International Standard.
  4. KS F 2308 (2022). Test method for density of soil particle, Korean Standards Association.
  5. KS F 2502 (2019). Standard test method for sieve analysis of fine and coarse aggregates, Korean Standards Association, Korean Standards Association.
  6. KS F 2505 (2022). Standard test method for bulk density and solid contents in aggregates, Korean Standards Association.
  7. KS F 4419 (2022). Concrete interlocking block for sidewalk and road, Korean Standards Association.
  8. KS F 4561 (2021). Braille blocks for the visually impaired, Korean Standards Association.
  9. Lucke. T. (2011). Field investigation of clogging in a permeable pavement system, Building Research & Information, 39(6), 603-615. https://doi.org/10.1080/09613218.2011.602182
  10. Mahsa, A. (2010). Clogging of Permeable Pavements in Semi-Areas, Master of Science Thesis, Delft University of Technology.
  11. MIL-STD-810 (2014). Procedure II-blowing sand, Military Standard Environment Engineering Considerations and Laboratory Tests.
  12. Park, D. K. (2014). Development of a Test Method to Evaluate the Permeability on Permeable Block Pavement, Ph.D, Dissertation, Chung Ang University.
  13. Park, J. S., & Yang, K. H. (2021). A proposal on imitated impurity assessment for interlocking block to reduce fine dust, Journal of the Korean Recycled Construction Resources Institute, 16(2), 39-40.
  14. Seoul Metropolitan City (2013). Standard for Design, Construction, and Maintenance of Pavement Using Permeable Block. Metropolitan Government, Seoul, Korea.