Journal of the Architectural Institute of Korea (대한건축학회논문집)

Architectural Institute of Korea (대한건축학회)
권호 표지
DOI QR코드

DOI QR Code

Thermal Resistance of Outside Insulated Concrete Wall According to Internal and External Surface Heat Flow

실내·외 표면 열류에 따라 산출된 외단열 콘크리트 외벽체의 열저항 비교 분석

  • Choi, Doo-Sung (Dept. of Building Equipment System and Fire Protection Engineering, Chungwoon University) ;
  • Moon, Ji-Hoon (Dept. of Architectural Design and Engineering, Incheon National University) ;
  • Lee, Ye-Ji (Dept. of Architectural Design and Engineering, Incheon National University) ;
  • Ko, Myeong-Jin (Dept. of Building System Technology, Daelim University College)
  • 최두성 (청운대학교 설비소방학과 ) ;
  • 문지훈 (인천대학교 일반대학원 건축학과) ;
  • 이예지 (인천대학교 일반대학원 건축학과) ;
  • 고명진 (대림대학교 소방안전설비과 )
  • Received : 2022.11.23
  • Accepted : 2023.01.13
  • Published : 2023.02.28
⟨ Previous Next ⟩

Abstract

Many studies have been conducted to accurately diagnose the thermal performance of building opaque exterior walls. Thermal resistance(R-value) is a representative indicator of the thermal performance of opaque exterior walls. Methods of calculating thermal performance are mainly ISO 6946 and ISO 9869-1. Thermal resistances calculated using the two methodologies sometimes show differences. To reduce this difference, many studies are being conducted to perform in-situ measurements more accurately. ISO 9869-1 measures use a heat flowmeter sensor and a temperature sensor. In particular, it is recommended that the heat flowmeter sensor be attached to a surface on a stable temperature environment side. so, that the heat flowmeter sensor is attached to an internal surface that would not be affected by snow, rain, or solar radiation. However, it has been reported that a large deviation from the theoretical value when using the internal surface heat flow in an outside insulated wall. In this study, an internal surface heat flowmeter sensor is attached, and an external surface heat flowmeter sensor is also attached. And the purpose is to compare and analyze the thermal resistance calculated using the two heat flows. As a result, if the internal and external temperature difference is sufficiently large, using external surface heat flow would be closer to the theoretical value in the outdoor insulated wall. However, as the internal and external temperature difference becomes smaller, the accuracy decreases slightly even when using the outdoor surface heat flow.

Keywords

Acknowledgement

이 성과는 정부(과학기술정보통신부)의 재원으로 한국연구재단의 지원을 받아 수행된 연구임. 과제번호:NRF-2021R1F1A1063008

References

  1. Albatici, R., & Tonelli, A. M. (2010). Infrared thermovision technique for the assessment of thermal transmittance value of opaque building elements on site. Energy and Buildings, 42, 2177-2183, https://doi.org/10.1016/j.enbuild.2013.07.004 
  2. Asdrubali, F., D'Alessandro, F., Baldinelli, G., & Bianchi, F. (2014). Evaluating in situ thermal transmittance of green buildings masonries-A Case study, Case Studies in Construction Materials, 1, 53-59, https://doi.org/10.1016/j.cscm.2014.04.004 
  3. Gaspar, K., Casals, M., & Gangolells, M. (2018). In situ measurement of facades with a low U-value: Avoiding deviations. Energy and Buildings, 170, 61-73, https://doi.org/10.1016/j.enbuild.2018.04.012 
  4. International Organization for Standardization (2014). Building Elements - In-Situ Measurement of Thermal Resistance and Thermal Transmittance - Part 1: Heat Flow Meter. (ISO Standard No. 9869-1). Retrieved from https://www.iso.org/standard/59697 
  5. International Organization for Standardization (2017). Building Components and Building Elements - Thermal Resistance and Thermal Transmittance - Calculation Method. (ISO Standard No. 6946). Retrieved from https://www.iso.org/standard/65708 
  6. Kim, S.H., Kim, J.H., Jeong, H.G., & Song, K.D. (2018). Reliability field test of the Air-Surface Temperature Ratio method for In situ measurement of U-values. Energies, 11(4), 803, https://doi.org/10.3390/en11040803 
  7. Rahiminejad, M., & Khovalyg, D. (2021). In-situ measurements of the U-value of a ventilated wall assembly. Journal of Physics: Conference Series, 2069, https://doi.org/10.1088/1742-6596/2069/1/012212 
  8. Rasooli, A., & Itard, L. (2018). In-situ characterization of walls' thermal resistance: An extension to the ISO 9869 standard method. Energies & Buildings, 179, 374-383, https://doi.org/10.1016/j.enbuild.2018.09.004 
  9. Teni, M., Krstic, H., & Kosinski, P. (2019). Review and comparison of current experimental approaches for in-situ measurements of building walls thermal transmittance, Energies & Buildings, 203, 109417, https://doi.org/10.1016/j.enbuild.2019.109417