Wind and Structures

Techno-Press (테크노프레스)
권호 표지
DOI QR코드

DOI QR Code

Research of the impact of material and flow properties on fluid-structure interaction in cage systems

  • Mehmet Emin Ozdemir (Department of Civil Engineering, Cankiri Karatekin University) ;
  • Murat Yaylaci (Department of Civil Engineering, Recep Tayyip Erdogan University)
  • Received : 2022.09.23
  • Accepted : 2022.12.22
  • Published : 2023.01.26
⟨ Previous Next ⟩

Abstract

This paper investigates the mechanical behavior of full-scale offshore fish cages under hydrodynamic loads. To simulate different cases, different materials were used in the fish cage and analyzed under different flow velocities. The cage system is studied in two parts: net cage and floating collar. Analyses were performed with the ANSYS Workbench program, which allows the Finite Element Method (FEM) and Computational Fluid Dynamics (CFD) method to be used together. Firstly, the fish cage was designed, and adjusted for FSI: Fluid (Fluent) analysis. Secondly, mesh structures were created, and hydrodynamic loads acting on the cage elements were calculated. Finally, the hydrodynamic loads were transferred to the mechanical model and applied as a pressure on the geometry. In this study, the equivalent (von Mises) stress, equivalent strain, and total deformation values of cage elements under hydrodynamic loads were investigated. The data obtained from the analyses were presented as figures and tables. As a result, it has been shown that it is appropriate to use all the materials examined for the net cage and the floating collar.

Keywords

References

  1. Al-Furjan, M.S.H., Farrokhian, A., Keshtegar, B., Kolahchi, R. and Trung, B.T. (2020), "Higher order nonlocal viscoelastic strain gradient theory for dynamic buckling analysis of carbon nanocones", Aerosp. Sci. Technol., 107, 106259. https://doi.org/10.1016/j.ast.2020.106259.
  2. Al-Furjan, M.S.H., Farrokhian, A., Mahmoud, S.R. and Kolahchi, R. (2021a), "Dynamic deflection and contact force histories of graphene platelets reinforced conical shell integrated with magnetostrictive layers subjected to low-velocity impact", ThinWall. Struct., 163, 107706. https://doi.org/10.1016/j.tws.2021.107706.
  3. Al-Furjan, M.S.H., Hajmohammad, M.H., Shen, X., Rajak, D.K. and Kolahchi, R. (2021b), "Evaluation of tensile strength and elastic modulus of 7075-T6 aluminum alloy by adding SiC reinforcing particles using vortex casting method", J. Alloys. Compd., 886, 161261. https://doi.org/10.1016/j.jallcom.2021.161261.
  4. ANSYS Mechanical APDL (2013) ANSYS Contact Technology Guide, Ansys, Inc., Canonsburg, Pennsylvania. U.S.A.
  5. Bi, C.W., Balashc, C., Matsubarab, S., Zhaoa, Y.P. and Donga, G.H. (2017), "Effects of cylindrical cruciform patterns on fluid flow and drag as determined by CFD models", Ocean Eng., 135, 28-38. http://dx.doi.org/10.1016/j.oceaneng.2017.02.032.
  6. Bi, C.W., Zhao, Y.P., Dong, G.H., Cui, Y. and Gui, F.K. (2015), "Experimental and numerical investigation on the damping effect of net cages in waves", J. Fluids Struct., 55, 122-138. https://doi.org/10.1016/j.jfluidstructs.2015.02.010.
  7. Bui, C.M., Ho, T.X. and Khieu, L.H. (2020), "Numerical study of a flow over and through offshore fish cages", Ocean Eng., 201, 107140.
  8. Choi, C.K. and Yu. W.J. (1998), "Adaptive finite element wind analysis with mesh refinement and recovery", Wind Struct., 1(1), 111-125. https://doi.org/10.12989/WAS.1998.1.1.111.
  9. Cui, Y., Guan, C.T., Wan, R., Huang, B. and Li, J. (2013), "Numerical simulation of a flatfish cage system in waves and currents", Aquac. Eng., 56, 26-33. https://doi.org/10.1016/j.aquaeng.2013.04.001.
  10. DarAssi, M. and Hadji, L. (2014), "Analysis of the interplay between sedimentation and thermophoresis in the presence of convection in colloidal suspensions", Proceedings of the ASME 2014 4th Joint US-European Fluids Engineering Division Summer Meeting. https://doi.org/10.1115/FEDSM2014-21078.
  11. Dikel, S. (2005), Cage Aquaculture, Cukurova University Faculty of Fisheries Publications. Adana, Turkey.
  12. Faramoushjan, S.G., Jalalifar, H. and Kolahchi, R. (2021), "Mathematical modelling and numerical study for buckling study in concrete beams containing carbon nanotubes", Adv. Concr. Constr., 11(6), 521-529. https://doi.org/10.12989/acc.2021.11.6.521.
  13. Farghaly, A.A. and Kontoni, D.P.N. (2018), "Nonlinear analysis of a riverine platform under earthquake and environmental loads", Wind Struct., 26(6), 343-354. https://doi.org/10.12989/WAS.2018.26.6.343.
  14. Fitridge, I., Dempster, T., Guenther, J. and de Nys, R. (2012), "The impact and control of biofouling in marine aquaculture: A review", Biofouling, 28, 649-669. https://doi.org/10.1080/08927014.2012.700478.
  15. Fredriksson, D.W., Decew, J., Lader, P., Volent, Z., Jensen, Q. and Willumsen, F.V. (2014), "A finite element modeling technique for an aquaculture net with laboratory measurement comparisons", Ocean Eng., 83, 99-110. https://doi.org/10.1016/j.oceaneng.2014.03.005.
  16. Ghosh, A. and Chakravorty, D. (2018), "Nonlinear first ply failure analysis of composite skewed hypar shells using FEM", Struct. Eng. Mech., 68(1), 81-94. https://doi.org/10.12989/sem.2018.68.1.081.
  17. Guvercin, Y., Abdioglu, A.A., Dizdar, A., Uzun Yaylaci, E. and Yaylaci, M. (2022a), "Suture button fixation method used in the treatment of syndesmosis injury: A biomechanical analysis of the effect of the placement of the button on the distal tibiofibular joint in the mid-stance phase with finite elements method", Injury. https://doi.org/10.1016/j.injury.2022.05.037.
  18. Guvercin, Y., Yaylaci, M., Dizdar, A., Kanat, A., Uzun Yaylaci, E., Ay, S., Abdioglu, A.A. and Sen, A. (2022b), "Biomechanical analysis of odontoid and transverse atlantal ligament in humans with ponticulus posticus variation under different loading conditions: finite element study", Injury. https://doi.org/10.1016/j.injury.2022.10.003.
  19. Guvercin, Y., Yaylaci, M., Olmez, H., Uzun Yaylaci, E., Ozdemir, M.E. and Dizdar, A. (2022c). "Finite element analysis of the mechanical behavior of the different angle hip femoral stem", BME., 6(1), 29-46. https://doi.org/10.12989/bme.2022.6.1.029.
  20. Hadji, L. and DarAssi, M. (2014), "Influence of sedimentation on the threshold for Soret-driven convection in colloidal suspensions", Phys. Rev. E. Stat. Nonlin. Soft Matter. Phys., 89(1). https://10.1103/PhysRevE.89.013014.
  21. Hajmohammad, M.H., Farrokhian, A. and Kolahchi, R. (2021), "Dynamic analysis in beam element of wave-piercing Catamarans undergoing slamming load based on mathematical modelling", Ocean Eng., 234, 109269. https://doi.org/10.1016/j.oceaneng.2021.109269.
  22. Keshtegar, B., Nehdi, M.L., Trung, N.T. and Kolahchi, R. (2021), "Predicting load capacity of shear walls using SVR-RSM model", Appl. Soft Comput., 112, 107739. https://doi.org/10.1016/j.asoc.2021.107739.
  23. Keshtegar, B., Xiao, M., Kolahchi, R. and Trung, N-T. (2020), "Reliability analysis of stiffened aircraft panels using adjusting mean value method", AIAA J., 58(12), 5448-5458. https://doi.org/10.2514/1.J059636.
  24. Kim, T., Lee, J., Fredriksson, D.W., DeCew, J., Drach, A. and Yim, S.C. (2018), "Design approach of an aquaculture cage system for deployment in the constructed channel flow environments of a power plant", PLoS ONE, 13(6), e0198826. https://doi.org/10.1371/journal.pone.0198826.
  25. Klebert, P., Volent, Z. and Rosten, T. (2018), "Measurement and simulation of the three-dimensional flow pattern and particle removal efficiencies in a large floating closed sea cage with multiple inlets and drains", Aquac. Eng., 80, 11-21. https://doi.org/10.1016/j.aquaeng.2017.11.001.
  26. Kolahchi, R. and Kolahdouzan, F. (2021), "A numerical method for magneto-hygro-thermal dynamic stability analysis of defective quadrilateral graphene sheets using higher order nonlocal strain gradient theory with different movable boundary conditions", Appl. Math. Model., 91, 458-475. https://doi.org/10.1016/j.apm.2020.09.060.
  27. Kolahchi, R., Keshtegar, B. and Trung, N.T. (2021), "Optimization of dynamic properties for laminated multiphase nanocomposite sandwich conical shell in thermal and magnetic conditions", J. Sandw. Struct. Mater., 24(1), 643-662. https://doi.org/10.1177/10996362211020388.
  28. Kunche, M.C., Mishra, P.K., Nallala, H.B., Hirwani, C.K., Katariya, P.V., Panda, S. and Panda, S.K. (2019), "Theoretical and experimental modal responses of adhesive bonded Tjoints", Wind Struct., 29(5), 361-369. https://doi.org/10.12989/was.2019.29.5.361.
  29. Lei, W., Liu, C., Qin, X. and Chen, R. (2018), "Iterative coupling of precise integration FEM and TD-BEM for elastodynamic analysis", Struct. Eng. Mech., 67(4), 317-326. https://doi.org/10.12989/sem.2018.67.4.317.
  30. Myrli, O. and Khawaja, H. (2019), "Fluid-structure interaction (FSI) modelling of aquaculture net cage", Int. J. Multiphysics, 13(1), 97-111. https://doi.org/10.21152/1750-9548.13.1.97.
  31. Nisanci, G.N., Guvercin, Y, Ates S.M., Olmez, H., Uzun Yaylaci, E. and Yaylaci, M. (2020), "Investigation of the effect of different prosthesis designs and numbers on stress, strain and deformation distribution", Int. J. of Eng. and Appl. Sci., 12(4), 138-152. https://doi.org/10.24107/ijeas.816227.
  32. Ogut, H. and Uzun, E. (2014), "Incidence and prevalence of Diplectanum aequans and its influence on the fitness of juvenile sea bass (Dicentrarchus labrax) in the Black Sea", Aquac. Res., 45(4), 742-748. https://doi.org/10.1111/are.12015.
  33. Oner, E., Sengul Sabano, B., Uzun Yaylaci, E., Adiyaman, G., Yaylaci, M. and Birinci, A. (2022) "On the plane receding contact between two functionally graded layers using computational, finite element and artificial neural network methods", J. Appl. Math. Mech., https://doi.org/10.1002/zamm.202100287.
  34. Patursson, O., Swift, M.R., Tsukrov, I., Simonsen, K., Baldwin, K., Fredriksson, D.W. and Celikkol, B. (2010), "Development of a porous media model with application to flow through and around a net panel", Ocean Eng., 37(2-3), 314-324. https://doi.org/10.1016/j.oceaneng.2009.10.001.
  35. Saberi, S., Memarzadeh, P. and Zirakian, T. (2019), "Study of buckling stability of cracked plates under uniaxial compression using singular FEM", Struct. Eng. Mech., 69(4), 417-426. https://doi.org/10.12989/sem.2019.69.4.417.
  36. Sarfarazi, V. and Haeri, H. (2016), "A review of experimental and numerical investigations about crack propagation", Comput. Concr., 18(2), 235-266. https://doi.org/10.12989/cac.2016.18.2.235.
  37. Sarfarazi, V. and Haeri, H. (2018), "Three-dimensional numerical modeling of effect of bedding layer on the tensile failure behavior in hollow disc models using Particle Flow Code (PFC3D)", Struct. Eng. Mech., 68(5), 537-547. https://doi.org/10.12989/sem.2018.68.5.537.
  38. Selvam, R.P., Govindaswamy, S. and Bosch, H. (2002), "Aeroelastic analysis of bridges using FEM and moving grids", Wind Struct., 5(2), 257-266. https://doi.org/10.12989/WAS.2002.5.2_3_4.257.
  39. Terzi, M., Guvercin, Y., Ates, S.M, Sekban, D.M. and Yaylaci, M. (2020), "Effect of different abutment materials on stress distribution in peripheral bone and dental implant system", Sigma J. Eng. Nat. Sci., 38(3), 1515-1527.
  40. Tsukrov, I., Eroshkin, O., Fredriksson, D., Swift, M.R. and Celikkol, B. (2003) "Finite element modeling of net panels using a consistent net element", Ocean Eng., 30(2), 251-270. https://doi.org/10.1016/S0029-8018(02)00021-5.
  41. Uzun Yaylaci, E. (2022a), "Characterization of Pseudoalteromonas sp. from Aquaculture Environment and Optimization of Fermentation Culture Parameters by RSM-Based Modeling", Turkish J. Fish. Aquat. Sci., 22(11), https://doi.org/10.4194/TRJFAS21726.
  42. Uzun Yaylaci, E. (2022b), "Isolation and Characterization of Bacillus spp. from Aquaculture Cage Water and Its Inhibitory Effect Against Selected Vibrio spp", Arch. Microbiol., 204, 26. https://doi.org/10.1007/s00203-021-02657-0.
  43. Uzun Yaylaci, E., Oner, E., Yaylaci, M., Ozdemir, M.E., Abushattal, A. and Birinci, A. (2022). "Application of artificial neural networks in the analysis of the continuous contact problem", Struct. Eng. Mech., 84(1), 35-48. https://doi.org/10.12989/sem.2022.84.1.035.
  44. Winthereig-Rasmussen, H., Simonsen, K. and Patursson, O. (2016), "Flow through fish farming sea cages: Comparing computational fluid dynamics simulations with scaled and fullscale experimental data", Ocean Eng., 124, 21-31. https://doi.org/10.1016/j.oceaneng.2016.07.027.
  45. Xu, T.J., Hou, H.M., Dong, G.H., Zhao, Y.P. and Guo, W.J. (2017), "Structural analysis of float collar for metal fish cage in waves", Turkish J. Fish. Aquat. Sci., 17(2), 257-268. https://doi.org/10.4194/1303-2712-v17_2_04.
  46. Yaylaci, M. (2016), "The investigation crack problem through numerical analysis", Struct. Eng. Mech., 57(6), 1143-1156. https://doi.org 10.12989/sem.2016.57.6.1143.
  47. Yaylaci, M. (2022), "Simulate of edge and an internal crack problem and estimation of stress intensity factor through finite element method", Adv. Nano Res., 12(4), 405-414. https://doi.org/10.12989/anr.2022.12.4.405.
  48. Yaylaci, M., Abanoz, M., Uzun Yaylaci, E., Olmez, H., Sekban, M.D. and Birinci, A. (2022). "The contact problem of the functionally graded layer resting on rigid foundation pressed via rigid punch", Steel Comp. Struct., 43(5), 661-672. https://doi.org/10.12989/scs.2022.43.5.661.
  49. Yaylaci, M., Adiyaman, E., Oner, E. and Birinci, A. (2020), "Examination of analytical and finite element solutions regarding contact of a functionally graded layer", Struct. Eng. Mech., 76(3), 325-336. https://doi.org/10.12989/sem.2020.76.3.325.
  50. Yaylaci, M., Adiyaman, E., Oner, E. and Birinci, A. (2021a), "Investigation of continuous and discontinuous contact cases in the contact mechanics of graded materials using analytical method and FEM", Comput. Concrete, 27, 99-210. https://doi.org/10.12989/cac.2021.27.3.199.
  51. Yaylaci, M., Sengul Sabano, B., Ozdemir, M.E. and Birinci, A. (2022a), "Solving the contact problem of functionally graded layers resting on a homogeneous half-plane and pressed with a uniformly distributed load by analytical and numerical methods", Struct. Eng. Mech., 82(3), 401-416. https://doi.org/10.12989/sem.2022.82.3.401.
  52. Yaylaci, M., Uzun Yaylaci, E., Ozdemir, M.E., Ay, S., Ozturk, S. (2022b). "Implementation of finite element and artificial neural network methods to analyze the contact problem of a functionally graded layer containing crack", Steel Comp. Struct., 45(4), 501-511. https://doi.org/10.12989/scs.2022.45.4.501.
  53. Yaylaci, M., Yayli, M., Uzun Yaylaci, E., Olmez, H. and Birinci, A. (2021b), "Analyzing the contact problem of a functionally graded layer resting on an elastic half plane with theory of elasticity, finite element method and multilayer perceptron", Struct. Eng. Mech., 78, 585-597. https://doi.org/10.12989/sem.2021.78.5.585.
  54. Zhao, Y.P., Bi, C.W., Dong, G.H., Bai, X.D. and Xu, T.J. (2016), "A numerical study on wave propagating through in-line net cages", Proceedings of the International Conference on Offshore Mechanics and Arctic Engineering - OMAE. 7. https://doi.org/10.1115/OMAE2016-54510.