Acknowledgement
본 연구는 전라북도 뿌리·농기계기술 고도화를 위한 인프라활용 기술개발 지원사업(UR220025)의 지원을 받아 수행한 연구결과입니다.
References
- Q. Wu, W. Li, C. Liu, Y. Xu, G. Li, H. Zhang, J. Huang, and J. Miao, "Carbon fiber reinforced elastomeric thermal interface materials for spacecraft", Carbon, 187, 432-438 (2022) https://doi.org/10.1016/j.carbon.2021.11.039
- J. Li, C. Zhu, Z. Zhao, P. Khalili, M. Clement, J. Tong, X. Liu, X. Yi, "Fire Properties of carbon fiber reinforced polymer improved by coating nonwoven flame retardant mat for aerospace application", J. Appl. Polym. Sci., 136(30), 47801 (2019)
- J. Li, Z. Ye, P. Mo, Y. Pang, E. Gao, C. Zhang, G. Du, R. Sun, and X. Zeng, "Compliance-tunable thermal interface materials based on vertically oriented carbon fiber arrays for high-performance thermal management", Compos. Sci. Technol., 234, 109948 (2023)
- N. L. Rock and P. N. Kumta, "Synthesis and characterization of electrochemically active graphite-silicon-tin composite anodes for Li-ion applications", J. Power Sources, 164(2), 829-838 (2007) https://doi.org/10.1016/j.jpowsour.2006.10.068
- Z. Wu, J. Dong, X. Li, X. Zhao, W. Tan, C. Ji, and Q. Zhang, "Tough Polyimide composites synergistically reinforced by carbon nanofiber-grafted carbon fiber and rGO for improved heat dissipation and electromagnetic interference shielding", J. Mater. Sci. Technol., 149, 225-236 (2023) https://doi.org/10.1016/j.jmst.2022.11.039
- A. Tugirumubano, H. Jeong, J. D. Kim, L. K. Kwac, and H. G. Kim, "Reliability evaluation of the performance of nonwoven carbon fabric for heating element applications", J. Mater. Res. Technol., 14, 2140-2149 (2021) https://doi.org/10.1016/j.jmrt.2021.07.111
- N. Athanasopoulos, G. Koutsoukis, D. Vlachos, and V. Kostopoulos, "Temperature uniformity analysis and development of open lightweight composite molds using carbon fibers as heating elements", Compos. Pt. B-Eng., 50, 279-289 (2013) https://doi.org/10.1016/j.compositesb.2013.02.038
- J. S. Jang, Y. W. Lim, D. H. Kim, D. Lee, W. T. Koo, H. Lee, B. S. Bae, and I. D. Kim, "Glass-fabric reinforced Ag nanowire/siloxane composite heater substrate: sub-10nm metal oxide nanosheet for sensitive flexible sensing platform", Small, 14(44), 1802260 (2018)
- H. Kim, S. Yarlagadda, J. W. Gillespie, N. B. Shevchenko, and B. K. Fink, "A study on the introduction heating of carbon fiber reinforced thermoplastic composites", Adv. Compos. Mater., 11(1), 71-80 (2002) https://doi.org/10.1163/156855102753613309
- A. Fosbury, S. Wang, Y. F. Pin, and D. D. L. Chung, "The interlaminar interface of a carbon fober Polymer-matrix composite as a resistance heating element", Compos. Pt. A-Appl. Sci. Manuf. 34(10), 993-940 (2003)
- S. Lee, D. Jang, Y. S. Chung, and S. Lee, "Cost-effective and highly efficient surface heating elements using high thermal conductive carbon fibers", Compos. Pt. A-Appl. Sci. Manuf., 137, 105992 (2020)
- B. Coto, P. Hallander, L. Mendizzabal, F. Pagano, H. Kling, R. Ortiz, J. Barriga, and L. Selegard, "Particle and rain erosion mechanisms on Ti/TiN multilayer PVD coatings for carbon fibre reinforced polymer substrates protection", Wear, 466-467, 203575 (2021)
- H. Hatta, T. Aoki, Y. Kogo, and T. Yarii, "High-temperature oxidation behavior of SiC-coated carbon fiber-reinforced carbon matrix composites", Compos. Pt. A-Appl. Sci. Manuf., 30(4), 515-520 (1999) https://doi.org/10.1016/S1359-835X(98)00143-2
- A. K. Roy, S. Schulze, M. Hietschold, and W. A. Goedel, "Oxidation protection of carbon fibers by coating with alumina and/or titania using atomic layer deposition", Carbon, 50(3), 761-770 (2012) https://doi.org/10.1016/j.carbon.2011.09.023
- A. R. Boccaccini, J. Cho, J. A. Roether, B. J. C. Thomas, E. J. Minay, and M. S. P. Shaffer, "Electrophoretic deposition of carbon nanotubes", Carbon, 44(15), 3149-3160 (2006) https://doi.org/10.1016/j.carbon.2006.06.021
- S. CandraKishore and A. Pandurangan, "Electroporetic deposition of cobalt catalyst layer over stainless steel for the high yield synthesis of carbon nanotubes", Appl. Surf. Sci., 258(20), 7936-7942 (2012) https://doi.org/10.1016/j.apsusc.2012.04.138
- J. Tang, W. Li, and Z. Wang, "Facile synthesis of soluble, self-crosslinkable and crystalline polyimides with ultrahigh thermal/chemical resistance", Polymer, 268, 125717 (2023)
- J. Chen, S. Yang, Z. Tao, A. Hu, and L. Fan, "Processing and Properties of Carbon Fiber-reinforced PMR Type Polyimide Composites", High Perform. Polym., 18(3), 377-396 (2006) https://doi.org/10.1177/0954008306063395
- O. van der Biest, S. Put, G. Anne, J. Vleugels,"Electrophoretic deposition for coatings and free standing objects", J. Mater. Sci., 39, 779-785 (2004) https://doi.org/10.1023/B:JMSC.0000012905.62256.39
- S. Hu, W. Li, H. Finklea, and X. Liu, "A review of electrophoretic deposition of metal oxides and its application in solid oxide fuel cells", Adv. Colloid and Interface Sci., 276, 102102 (2020)