과제정보
이 논문은 2021년 정부(과학기술정보통신부)의 재원으로 한국연구재단의 연구비 지원에 의해 수행되었습니다(No. NRF-2020 R1A2C3012248). 이에 감사드립니다.
참고문헌
- ACI 222R-19. (2019). Guide to Protection of Reinforcing Steel in Concrete against Corrosion, American Concrete Institute, Farmington Hills, MI, USA.
- ACI 365.1R-17. (2017). Report on Service Life Prediction, American Concrete Institute, Farmington Hills, MI, USA.
- Ahmad, S. (2003). Reinforcement corrosion in concrete structures, its monitoring and service life prediction--a review, Cement and Concrete Composites, 25(4-5), 459-471. https://doi.org/10.1016/S0958-9465(02)00086-0
- Andrade, C. (2017). Reliability analysis of corrosion onset: initiation limit state, Journal of Structural Integrity and Maintenance, 2(4), 200-208. https://doi.org/10.1080/24705314.2017.1388693
- Andrade, C., Alonso, C., Molina, F.J. (1993). Cover cracking as a function of bar corrosion: part I-experimental test, Materials and Structures, 26, 453-464. https://doi.org/10.1007/BF02472805
- Ann, K.Y. (2005). Enhancing the Chloride Threshold Level for Steel Corrosion in Concrete, Ph.D Thesis, Imperial College London (University of London).
- Bazant, Z.P. (1979). Physical model for steel corrosion in concrete sea structures-application, Journal of the Structural Division, 105(6), 1155-1166. https://doi.org/10.1061/JSDEAG.0005169
- Buenfeld, N.R., Broomfield, J.P. (2002). Influence of electrochemical chloride extraction on the bond between steel and concrete, Magazine of Concrete Research, 52(2), 79-91. https://doi.org/10.1680/macr.2000.52.2.79
- Concha, N., Oreta, A.W. (2018). A model for time-to-cracking of concrete due to chloride induced corrosion using artificial neural network, IOP Conference Series: Materials Science and Engineering, 431(7), 072009.
- El Maaddawy, T., Soudki, K. (2007). A model for prediction of time from corrosion initiation to corrosion cracking, Cement and Concrete Composites, 29(3), 168-175. https://doi.org/10.1016/j.cemconcomp.2006.11.004
- Hwang, W., Ann, K.Y. (2023). Determination of rust formation to cracking at the steel-concrete interface by corrosion of steel in concrete, Construction and Building Materials, 367, 130215.
- ISO 1920-12:2015. (2015). Testing of Concrete - Part 12: Determination of the Carbonation Resistance of Concrete-Accelerated Carbonation Method, International Organization for Standardization.
- ISO WD. (2022). Assessment, Prevention and Repair for Steel Corrosion in Reinforced Concrete Structures, International Standard Organization. Working Draft NP 18726.
- Kallias, A.N., Rafiq, M.I. (2010). Finite element investigation of the structural response of corroded RC beams, Engineering Structures, 32(9), 2984-2994. https://doi.org/10.1016/j.engstruct.2010.05.017
- Kordtabar, B., Dehestani, M. (2021). Effect of corrosion in reinforced concrete frame components on pushover behavior and ductility of frame, Structural Concrete, 22(5), 2665-2687. https://doi.org/10.1002/suco.202000309
- Lim, S., Akiyama, M., Frangopol, D.M. (2016). Assessment of the structural performance of corrosion-affected RC members based on experimental study and probabilistic modeling, Engineering Structures, 127, 189-205. https://doi.org/10.1016/j.engstruct.2016.08.040
- Liu, Y., Weyers, R.E. (1998). Modeling the time-to-corrosion cracking in chloride contaminated reinforced concrete structures, ACI Materials Journal, 95(6), 675-680. https://doi.org/10.14359/410
- Neves, R., Torrent, R., Imamoto, K. (2018). Residual service life of carbonated structures based on site non-destructive tests, Cement and Concrete Research, 109, 10-18. https://doi.org/10.1016/j.cemconres.2018.04.002
- Paewchompoo, N., Yodsudjai, W., Chindaprasirt, P. (2020). Corrosion-induced cracking time in steel fiber-reinforced concrete: experiment and finite element method, ACI Materials Journal, 117(4), 3-12. https://doi.org/10.14359/51724620
- Reou, J.S., Ann, K.Y. (2010). The distribution of hydration products at the steel-concrete interface for concretes subjected to electrochemical treatment, Corrosion Science, 52(6), 2197-2205. https://doi.org/10.1016/j.corsci.2010.02.037
- Reou, J.S., Ann, K.Y. (2009). Electrochemical assessment on the corrosion risk of steel embedment in OPC concrete depending on the corrosion detection techniques, Materials Chemistry and Physics, 113(1), 78-84. https://doi.org/10.1016/j.matchemphys.2008.07.063
- Sanchez-Deza, A., Bastidas, D.M., Iglesia, A.L., Mora, E.M., Bastidas Rull, J.M. (2018). Service life prediction for 50-year-old buildings in marine environments, Revista de Metalurgia, 54(1) e111.
- Weyers, R.E. (1998). Service life model for concrete structures in chloride laden environments, ACI Materials Journal, 95(4), 445-453. https://doi.org/10.14359/387
- Zhu, X., Zi, G. (2017). A 2D mechano-chemical model for the simulation of reinforcement corrosion and concrete damage, Construction and Building Materials, 137, 330-344. https://doi.org/10.1016/j.conbuildmat.2017.01.103