한국건설순환자원학회논문집 (Journal of the Korean Recycled Construction Resources Institute)

한국건설순환자원학회 (Korean Recycled Construction Resources Institute)
권호 표지
DOI QR코드

DOI QR Code

나노 입자가 시멘트 모르타르의 파괴인성치에 미치는 영향

Effects of Nanoparticles on the Fracture Toughness of Cement Mortar

  • 최승원 (세종대학교 건설환경공학과) ;
  • 백초원 (세종대학교 건설환경공학과) ;
  • 이선열 (세종대학교 건설환경공학과) ;
  • 뉘엔 반 통 (세종대학교 건설환경공학과) ;
  • 김동주 (세종대학교 건설환경공학과)
  • Seung Won Choi (Department of Civil and Environmental Engineering, Sejong University) ;
  • Cho Won Baek (Department of Civil and Environmental Engineering, Sejong University) ;
  • Seon Yeol Lee (Department of Civil and Environmental Engineering, Sejong University) ;
  • Van Thong Nguyen (Department of Civil and Environmental Engineering, Sejong University) ;
  • Dong Joo Kim (Department of Civil and Environmental Engineering, Sejong University)
  • 투고 : 2023.10.06
  • 심사 : 2023.12.18
  • 발행 : 2023.12.30
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

이 연구는 나노 입자의 혼입이 시멘트 모르타르의 파괴인성치에 미치는 영향을 조사하였다. 탄소나노튜브 (carbon nanotube, CNT), 나노실리카 (nanosilica. NS), 그리고 나노 탄산칼슘 (nano calcium carbonate, NC)가 각각 혼입된 시멘트 모르타르의 3점 재하 휨강도, 압축강도, 슬럼프 실험을 수행하였다. 물시멘트비, 잔골재시멘트비가 각각 0.45, 1.5인 모르타르에 19.5 mm 강섬유가 0, 2 vol.% 혼입된 시멘트 모르타르를 사용하였다. 나노 입자 혼입은 시멘트 모르타르의 파괴인성치와 압축강도를 일부 향상시켰다. 그러나 강섬유가 보강된 시멘트 모르타르의 경우 나노 입자 혼입은 모르타르 유동성을 저하하여 강섬유의 분산도에 부정적 영향을 초래하여 오히려 파괴인성치를 감소시키는 결과를 확인할 수 있었다. 나노 입자의 혼입으로 인한 모르타르의 유동성 저하를 개선할 수 있는 추가적인 연구가 필요하다.

This study investigated the effects of nanoparticles on the fracture toughness of cement mortar. Three-point bending tests, compressive tests, and slump tests were conducted on cement mortars reinforced with carbon nanotubes(CNTs), nanosilica(NS), and nano calcium carbonate(NC), respectively. Cement mortar with a water-to-cement ratio and a sand-to-cement ratio of 0.45 and 1.5, respectively, and reinforced with 0 and 2 vol.% of 19.5 mm steel fibers, respectively, was used. Reinforcement with nanoparticles partially improved the fracture toughness and compressive strength of the cement mortar. However, in the case of cement mortar reinforced with steel fibers, the reinforcement with nanoparticles was found to reduce the flowability of the mortar, adversely affecting the dispersion of steel fibers, and ultimately leading to a decrease in fracture toughness, contrary to the intended enhancement. Additional research is needed to improve the decrease in mortar fluidity caused by the reinforcement with nanoparticles.

키워드

과제정보

본 연구는 국토교통부/국토교통과학기술진흥원의 지원으로 수행되었습니다(과제번호 23NANO-C156177-04).

참고문헌

  1. Adhikary, S.K., Rudzionis, Z., Rajapriya, R. (2020). The effect of carbon nanotubes on the flowability, mechanical, microstructural and durability properties of cementitious composite: an overview, Sustainability, 12(20), 8362.
  2. Adhikary, S.K., Rudzionis, Z., Tuckute, S., Ashish, D.K. (2021). Effects of carbon nanotubes on expanded glass and silica aerogel based lightweight concrete, Scientific Reports, 11(1), 2104.
  3. Al Ghabban, A., Al Zubaidi, A.B., Jafar, M., Fakhri, Z. (2018). Effect of nano SiO2 and nano CaCO3 on the mechanical properties, durability and flowability of concrete, IOP Conference Series: Materials Science and Engineering, 454, 0-10. https://doi.org/10.1088/1757-899X/454/1/012016
  4. Assi, L., Alsalman, A., Bianco, D., Ziehl, P., El-Khatib, J., Bayat, M., Hussein, F.H. (2021). Multiwall carbon nanotubes(MWCNTs) dispersion & mechanical effects in OPC mortar & paste: a review, Journal of Building Engineering, 43, 102512.
  5. Cosentino, I., Liendo, F., Arduino, M., Restuccia, L., Bensaid, S., Deorsola, F., Ferro, G.A. (2020). Nano CaCO3 particles in cement mortars towards developing a circular economy in the cement industry, Procedia Structural Integrity, 26, 155-165. https://doi.org/10.1016/j.prostr.2020.06.019
  6. Dang, V.P., Kim, D.J. (2023). Effects of nanoparticles on the tensile behavior of ultra-high-performance fiber-reinforced concrete at high strain rates, Journal of Building Engineering, 63, 105513.
  7. Isfahani, F.T., Li, W., Redaelli, E. (2016). Dispersion of multi-walled carbon nanotubes and its effects on the properties of cement composites, Cement and Concrete Composites, 74, 154-163. https://doi.org/10.1016/j.cemconcomp.2016.09.007
  8. Jalal, M., Mansouri, E., Sharifipour, M., Pouladkhan, A.R. (2012). Mechanical, rheological, durability and microstructural properties of high performance self-compacting concrete containing SiO2 micro and nanoparticles, Materials and Design, 34, 389-400. https://doi.org/10.1016/j.matdes.2011.08.037
  9. Jo, B.W., Kim, C.H., Tae, G.H., Park, J.B. (2007). Characteristics of cement mortar with nano-SiO2 particles, Construction and Building Materials, 21(6), 1351-1355. https://doi.org/10.1016/j.conbuildmat.2005.12.020
  10. Kim, M.K., Kim, D.J. (2018). Electromechanical response of high-performance fiber-reinforced cementitious composites containing milled glass fibers under tension, Materials, 11(7), 1115.
  11. Lee, I.W., Hwang, R.H., Kim, D.J., Pyo, S.H. (2020). Interfacial fracture toughness between aggregates and injected quick-hardening mortar, Cement and Concrete Composites, 106, 103485.
  12. Lee, S.Y., Le, H.V., Kim, D.J. (2019). Self-stress sensing smart concrete containing fine steel slag aggregates and steel fibers under high compressive stress, Construction and Building Materials, 220, 149-160. https://doi.org/10.1016/j.conbuildmat.2019.05.197
  13. Makar, J.M., Chan, G.W. (2009). Growth of cement hydration products on single-walled carbon nanotubes, Journal of the American Ceramic Society, 92(6), 1303-1310. https://doi.org/10.1111/j.1551-2916.2009.03055.x
  14. Park, J.K., Kim, M.O., Kim, D.J. (2020). Pullout behavior of recycled waste fishing net fibers embedded in cement mortar, Materials, 13(18), 4195.
  15. Shakhmenko, G., Juhnevica, I., Korjakins, A. (2013). Influence of sol-gel nanosilica on hardening processes and physically-mechanical properties of cement paste, Procedia Engineering, 57, 1013-1021. https://doi.org/10.1016/j.proeng.2013.04.128
  16. Supit, S.W., Shaikh, F.U. (2014). Effect of nano-CaCO3 on compressive strength development of high volume fly ash mortars and concretes, Journal of Advanced Concrete Technology, 12(6), 178-186. https://doi.org/10.3151/jact.12.178
  17. Wang, Y.F., Hu, H., Rong, C.Q. (2017). The effect of the diameter of carbon nanotube on the mechanical and electrical properties of cement mortar, Key Engineering Materials, 730, 479-485. https://doi.org/10.4028/www.scientific.net/KEM.730.479
  18. Yoo, D.Y., Oh, T., Banthia, N. (2022). Nanomaterials in ultra-high-performance concrete(UHPC) - a review, Cement and Concrete Composites, 134, 104730.