Acknowledgement
본 연구는 교육부와 한국연구재단의 재원으로 지원을 받아 수행된 3단계 산학연협력 선도대학 육성사업(LINC 3.0)의 연구 결과입니다.
References
- N. J. Kim, C. B. Kim, S. M. Yun, and S. T. Han, "A study on boiling characteristics of direct contact LNG evaporator", 1994 SAREK Winter Annual Conference, 1995, pp. 380-385. Retrieved from https://www.dbpia.co.kr/journal/articleDetail?nodeId=NODE00690703.
- H. Choi and K. Min, "The down-sizing for the better fuel efficiency of HSDI diesel engines", Auto Journal, Vol. 30, No. 6, 2008, pp. 28-33. Retrieved from https://www.dbpia.co.kr/Journal/articleDetail?nodeId=NODE01102171. 102171
- W. S. Ryoo, M. J. Seo, J. K. Yu, and J. H. Jeong, "Numerical analysis of phase-change in PCHE (printed circuit heat exchanger) for LNG carrier", The KSFM Journals of Fluid Machinery, Vol. 26, No. 1, 2023, pp. 23-28, doi: https://doi.org/10.5293/kfma.2023.26.1.023.
- H. Lee, J. Yi, C. Bae, J. Heo, and J. Jeon, "The study of comparison of cooling system for H2 discharge station", Journal of Hydrogen and New Energy, Vol. 30, No. 2, 2019, pp. 163-169, doi: https://doi.org/10.7316/KHNES.2019.30.2.163.
- K. H. Kim, Y. G. Jung, and C. H. Han, "Energy and entransy characteristic analysis of heat exchangers depending on heat exchanger type", Journal of Hydrogen and New Energy, Vol. 31, No. 1, 2020, pp. 112-121, doi: https://doi.org/10.7316/KHNES.2020.31.1.112.
- S. Son and B. I. Choi, "A study on thermal design of printed circuit heat exchanger for supply of cryogenic high pressure liquid hydrogen", Journal of Hydrogen and New Energy, Vol. 32, No. 5, 2021, pp. 347-355, doi: https://doi.org/10.7316/KHNES.2021.32.5.347.
- J. Cha, S. H. Park, C. S. Lee, and S. W. Park, "Study on spray and exhaust emission characteristics of DME-biodiesel blended fuel in compression ignition engine", Transactions of the Korean Society of Mechanical Engineers B, Vol. 35, No. 1, 2011, pp. 67-73, doi: https://doi.org/10.3795/KSME-B.2011.35.1.067.
- D. Jeong, Y. Lee, and G. Moon, "Alternative diesel fuel, GTL (gas-to-liquids)", Auto Journal, Vol. 32, No. 4, 2010, pp. 53-57. Retrieved from https://www.dbpia.co.kr/journal/articleDetail?nodeId=NODE01496806.
- D. Kim and J. Ha, "The technology trend of particulate material reducing system for diesel engine", Papers from the Academic Conference Commemorating the 30th Anniversary of the Foundation of the Korean Society of Automotive Engineers, Vol. 3, 2008, pp. 1428-1435. Retrieved from https://www.dbpia.co.kr/journal/articleDetail?nodeId=NODE01126878.
- T. Jin, J. P. Hong, H. Zheng, K. Tang, and Z. H. Gan, "Measurement of boiling heat transfer coefficient in liquid nitrogen bath by inverse heat conduction method", Journal of Zhejiang University-SCIENCE A, Vol. 10, No. 5, 2009, pp. 691-696, doi: https://doi.org/10.1631/jzus.A0820540.
- M. Hatami, M. Jafaryar, D. D. Ganji, and M. Gorji-Bandpy, "Optimization of finned-tube heat exchangers for diesel exhaust waste heat recovery using CFD and CCD techniques", International Communications in Heat and Mass Transfer, Vol. 57, 2014, pp. 254-263, doi: https://doi.org/10.1016/j.icheatmasstransfer.2014.08.015.
- Y. H. Kim, K. J. Lee, J. E. Moon, and Y. J. Choi, "An experimental study on heat transfer and pressure drop in diffusion bonded micro-channel heat exchangers", Papers at the 2007 Fall Conference of the Korean Society of Mechanical Engineers, 2007, pp. 278-283. Retrieved from https://www.dbpia.co.kr/journal/articleDetail?nodeId=NODE00915787.
- M. H. Kim, "Heat transfer coefficients of concentric annuli for testing heat transfer characteristics of alternative refrigerants in tubes", Journal of Hydrogen and New Energy, Vol. 32, No. 1, 2021, pp. 63-67, doi: https://doi.org/10.7316/KHNES.2021.32.1.63.