References
- J. H. Kim, G. S. Son, S. Chang, S. H. Park, C. H. Won, D. J. Min, C. O. Hong, H. D. Lee, and J. L. Kwon, "Development of a fuel processing system for fuel cell vehicle", KSAE 2012 Annual Spring Conference, Vol. 2012, No. 5, 2012, pp. 1631-1634. Retrieved from https://www.dbpia.co.kr/journal/articleDetail?nodeId=NODE01976553.
- D. W. Jung, J. Choi, and H. K. Suh, "Analysis of thermal flow characteristics according to the opening ratio of high-pressure valve for hydrogen storage tank", Journal of Hydrogen and New Energy, Vol. 33, No. 5, 2022, pp. 525-533, doi: https://doi.org/10.7316/KHNES.2022.33.5.525.
- S. J. Oh, J. H. Yoon, S. P. Kim, and J. Choi, "A numerical study on the flame arrestor for safety valve of hydrogen", Journal of Hydrogen and New Energy, Vol. 33, No. 4, 2022, pp. 391-399, doi: https://doi.org/10.7316/KHNES.2022.33.4.391.
- H. L. Kang, H. J. Park, and S. H. Han, "Investigation of the flow characteristics for cylinder-in-ball valve due to a change in the opening rate", Applied Sciences, Vol. 12, No. 18, 2022, pp. 8930, doi: https://doi.org/10.3390/app12188930.
- D. Wu, S. Li, and P. Wu, "CFD simulation of flow-pressure characteristics of a pressure control valve for automotive fuel supply system", Energy Conversion and Management, Vol. 101, 2015, pp. 658-665, doi: https://doi.org/10.1016/j.enconman.2015.06.025.
- T. Pusztai and Z. Simenfalvi, "CFD analysis on a direct spring-loaded safety valve to determine flow forces", Pollack Periodica, Vol. 16, No. 1, 2021, pp. 109-113, doi: https://doi.org/10.1556/606.2020.00122.
- H. D. Kim, J. H. Lee, K. A. Park, T. Setoguchi, and S. Matsuo, "A study of the gas flow through a LNG safety valve", Journal of Thermal Science, Vol. 15, 2006, pp. 355-360, doi: https://doi.org/10.1007/s11630-006-0355-5.
- L. Yang, Z. Wang, W. Dempster, X. Yu, and S. T. Tu, "Experiments and transient simulation on spring-loaded pressure relief valve under high temperature and high pressure steam conditions", Journal of Loss Prevention in the Process Industries, Vol. 45, 2017, pp. 133-146, doi: https://doi.org/10.1016/j.jlp.2016.11.019.
- X. Song, L. Cui, M. Cao, W. Cao, Y. Park, and W. M. Dempster, "A CFD analysis of the dynamics of a direct-operated safety relief valve mounted on a pressure vessel", Energy Conversion and Management, Vol. 81, 2014, pp. 407-419, doi: https://doi.org/10.1016/j.enconman.2014.02.021.
- X. G. Song, L. T. Wang, Y. C. Park, and W. Sun, "A fluid-structure interaction analysis of the spring-loaded pressure safety valve during popping off", Procedia Engineering, Vol. 130, 2015, pp. 87-94, doi: https://doi.org/10.1016/j.proeng.2015.12.178.
- B. Liu, J. Wang, J. Qian, F. Chen, and Z. Jin, "Dynamic response analysis of pilot control globe valve focusing on opening and closing time of pilot valve", Journal of Physics: Conference Series, Vol. 745, No. 3, 2016, pp. 032046, doi: https://doi.org/10.1088/1742-6596/745/3/032046.
- J. Ye, Z. Zhao, J. Zheng, S. Salem, J. Yu, J. Cui, and X. Jiao, "Transient flow characteristic of high-pressure hydrogen gas in check valve during the opening process", Energies, Vol. 13, No. 16, 2020, pp. 4222, doi: https://doi.org/10.3390/en13164222.
- Ansys Inc., "Ansys fluent theory guide", Ansys Inc., 2022, pp. 38.
- B. H. Park, "Simulation of temperature behavior in hydrogen tank during refueling using cubic equations of state", Journal of Hydrogen and New Energy, Vol. 30, No. 5, 2019, pp. 385-394, doi: https://doi.org/10.7316/KHNES.2019.30.5.385.
- B. H. Park, "Calculation and comparison of thermodynamic properties of hydrogen using equations of state for compressed hydrogen storage", Journal of Hydrogen and New Energy, Vol. 31, No. 2, 2020, pp. 184-193, doi: https://doi.org/10.7316/KHNES.2020.31.2.184.