Acknowledgement
본 연구는 해외자원개발협회 주요사업인 스마트 마이닝 전문 인력 양성(2021-0316-03)의 지원을 받아 수행되었습니다.
References
- Abolfazli, M. and Fahimifar, A., 2020, An investigation on the correlation between the joint roughness coefficient (JRC) and joint roughness parameters, Construction and Building Materials, 259, 120415.
- Aubertin, J.D. and Hutchinson, D.J., 2022, Scale-dependent rock surface characterization using LiDAR surveys, Engineering Geology, 301, 106614.
- Ban, L., Zhu, C., Qi, C., and Tao, Z., 2019, New roughness parameters for 3D roughness of rock joints. Bulletin of Engineering Geology and the Environment, 78, 4505-4517. https://doi.org/10.1007/s10064-018-1394-3
- Bandis, S.C., Lumsden, A.C., and Barton, N. R., 1983, Fundamentals of rock joint deformation, In International Journal of Rock Mechanics and Mining Sciences & Geomechanics Abstracts, 20(6), 249-268. https://doi.org/10.1016/0148-9062(83)90595-8
- Bao, H., Zhang, G., Lan, H., Yan, C., Xu, J., and Xu, W., 2020, Geometrical heterogeneity of the joint roughness coefficient revealed by 3D laser scanning, Engineering Geology, 265, 105415.
- Barton, N. and Choubey, V., 1977, The shear strength of rock joints in theory and practice, Rock mechanics, 10, 1-54. https://doi.org/10.1007/BF01261801
- Besl, P.J. and McKay, N.D., 1992, Method for registration of 3-D shapes, In Sensor fusion IV: control paradigms and data structures, 1611, 586-606. https://doi.org/10.1117/12.57955
- Diaz, M., Kim, K.Y., Yeom, S., Zhuang, L., Park, S., and Min, K.B., 2017, Surface roughness characterization of open and closed rock joints in deep cores using X-ray computed tomography, International Journal of Rock Mechanics and Mining Sciences, 98, 10-19. https://doi.org/10.1016/j.ijrmms.2017.07.001
- Garcia-Luna, R., Senent, S., and Jimenez, R., 2020, Characterization of joint roughness using long-range terrestrial photogrammetry, In ISRM EUROCK (pp. ISRM-EUROCK). ISRM.
- Grasselli, G. and Egger, P., 2003, Constitutive law for the shear strength of rock joints based on three-dimensional surface parameters, International Journal of Rock Mechanics and Mining Sciences, 40(1), 25-40. https://doi.org/10.1016/S1365-1609(02)00101-6
- Huan, J., 2021, Research of macro and micro mechanism of shear strength and quantitative description of 3D roughness for rock joints, Xi'an University of Technology.
- Liu, X.G., Zhu, W.C., Yu, Q.L., Chen, S.J., and Li, R.F., 2017, Estimation of the joint roughness coefficient of rock joints by consideration of two-order asperity and its application in double-joint shear tests, Engineering Geology, 220, 243-255. https://doi.org/10.1016/j.enggeo.2017.02.012
- Mallat, S., 1999, A wavelet tour of signal processing, Elsevier.
- Mandelbrot, B.B., 1983, On the quadratic mapping z→ z2-μ for complex μ and z: the fractal structure of its M set, and scaling, Physica D: Nonlinear Phenomena, 7(1-3), 224-239. https://doi.org/10.1016/0167-2789(83)90128-8
- Mo, P. and Li, Y., 2019, Estimating the three-dimensional joint roughness coefficient value of rock fractures, Bulletin of Engineering Geology and the Environment, 78, 857-866. https://doi.org/10.1007/s10064-017-1150-0
- Momeni, A., Torkan, M., Azhari, A., Uotinen, L., and Baghbanan, A., 2023, Evaluation of surface roughness of rock-like joints using close range photogrammetry method, In IOP Conference Series: Earth and Environmental Science, 1124(1), 012062.
- Myers, N.O., 1962, Characterization of surface roughness, Wear, 5(3), 182-189. https://doi.org/10.1016/0043-1648(62)90002-9
- Tatone, B.S. and Grasselli, G., 2010, A new 2D discontinuity roughness parameter and its correlation with JRC, International Journal of Rock Mechanics and Mining Sciences, 47(8), 1391-1400. https://doi.org/10.1016/j.ijrmms.2010.06.006
- Tse, R. and Cruden, D.M., 1979, Estimating joint roughness coefficients, In International Journal of Rock Mechanics and Mining Sciences & Geomechanics, 16(5), 303-307. https://doi.org/10.1016/0148-9062(79)90241-9
- Wang, C., Yong, R., Luo, Z., Du, S., Karakus, M., and Huang, C., 2023, A novel method for determining the three-dimensional roughness of rock joints based on profile slices, Rock Mechanics and Rock Engineering, 1-25.
- Yang, Z.Y., Lo, S.C., and Di, C.C., 2001, Reassessing the joint roughness coefficient (JRC) estimation using Z2, Rock Mechanics and Rock Engineering, 34, 243-251. https://doi.org/10.1007/s006030170012
- Yu, X. and Vayssade, B., 1991, Joint profiles and their roughness parameters, In International Journal of Rock Mechanics and Mining Sciences & Geomechanics, 28(4), 333-336. https://doi.org/10.1016/0148-9062(91)90598-G
- Zhang, G., Karakus, M., Tang, H., Ge, Y., and Jiang, Q., 2017, Estimation of joint roughness coefficient from three-dimensional discontinuity surface, Rock Mechanics and Rock Engineering, 50, 2535-2546. https://doi.org/10.1007/s00603-017-1264-5