Journal of the Korean Society of Industry Convergence (한국산업융합학회 논문집)

The Korean Society of Industry Convergence (한국산업융합학회)
권호 표지
DOI QR코드

DOI QR Code

Development of Pointcloud Data Integration Technology in Construction Sites via Drone Photogrammetry and MMS LiDAR

드론 및 MMS를 활용한 건설현장 점군 데이터 통합 기술 개발

  • Jae-Woo Park (Construction Policy Institute, Korea Institute of Civil Engineering and Building Technology) ;
  • Dong-Jun Yeom (Construction Policy Institute, Korea Institute of Civil Engineering and Building Technology)
  • 박재우 (한국건설기술연구원, 건설정책연구소) ;
  • 염동준 (한국건설기술연구원, 건설정책연구소)
  • Received : 2023.10.24
  • Accepted : 2023.12.05
  • Published : 2023.12.31
Download PDF
⟨ Previous Next ⟩

Abstract

This study presents the development of pointcloud data integration technology in construction sites via drone photogrammetry and MMS LiDAR. The integration of pointcloud data from drones and MMS technology can provide precise and accurate 3D digital maps of construction sites, which can benefit the development of smart construction and BIM. The advantages of using both drones and MMS technology for pointcloud data acquisition in construction sites are discussed, along with the limitations and challenges of using drone photogrammetry and MMS LiDAR for pointcloud data integration. The results of this study can contribute to the advancement of pointcloud data integration technology in construction sites and improve the efficiency and accuracy of construction projects.

Keywords

Acknowledgement

본 연구는 국토교통부/국토교통과학기술진흥원의 지원으로 수행되었음(스마트 건설기술 개발사업: 23SMIP-A158708-04).

References

  1. J. Xu, L. Ding, P.E. Love, "Digital reproduction of historical building ornamental components: from 3D scanning to 3D printing", Automation in Construction, 76, pp.85-96, (2017). https://doi.org/10.1016/j.autcon.2017.01.010
  2. Y. H. Lee, W. G. Yun, J. W. Park, "A Study on the Development of the Guidelines for Supervision and Inspection of Earthworks Quantity Using 3D Scanning Technology", Journal of The Korean Society of Industry Convergence, 23(5), pp.735-746, (2020).
  3. M.J. Chae, G.W. Lee, J. Y. Kim, J.W. Park, M.Y. Cho, "A 3D Surface Modeling System for Intelligent Excavation System", Automation in Construction, 20(7), pp.808-817, (2011). https://doi.org/10.1016/j.autcon.2011.02.003
  4. S. Kim, J.W. Park, "Analysis of Accuracy and Productivity of Terrestrial Laser Scanner for Earthwork", The Journal of the Korea Contents Association, 15(10), pp.587-596, (2015). https://doi.org/10.5392/JKCA.2015.15.10.587
  5. J.W. Park, D.J. Yeom, "Method for Establishing Ground Control Points to Realize UAV-based Precision Digital Maps of Earthwork Sites", Journal of Asian Architecture and Building Technology, 21(1), pp.110-119, (2022). https://doi.org/10.1080/13467581.2020.1869023
  6. S. El-Omari, O. Moselhi, "Integrating 3D laser scanning and photogrammetry for progress measurement of construction work", Automation in Construction, 18(1), pp.1-9, (2008). https://doi.org/10.1016/j.autcon.2008.05.006
  7. J.W. Park, S. Kim, "MMS Accuracy Analysis for Earthwork Site Application", Journal of the Korean Society of Industry Convergence, 22(2), pp.183-189, (2019).
  8. Yi Lin, Juha Hyyppa, Tomi Rosnell, Anttoni Jaakkola, Eija Honkavaara, Development of a UAV-MMS-Collaborative Aerial-to- Ground Remote Sensing System - A Preparatory Field Validation. IEEE Journal of Selected Topics in Applied Earth Observations and Remote Sensing, 6(4), pp.1893-1898, (2013). https://doi.org/10.1109/JSTARS.2012.2228168
  9. Y. K. Cho and J. Park, "Assessment of Construction Points for Grade Control and Reference in 3D", Georgia DOT Research Project 16-18 Final Report, (2019).
  10. Z. Shen, E. Erdogmus, G. Morcous, C. Cheng, Z. Shang, T. McCabe and A. Kodsy, "Early Detection of Near-Surface Void Defects in Concrete Pavement Using Drone Based Thermography and GPR Methods", Nebraska DOT Reasearch Reports Issue January, (2020).
  11. J. Irizarry and E. N. Johnson, "Field-Test-Based Guideline Development for the Integration of Unmanned Aerial Systems (UASs) in GDOT Operations", Georgia DOT Research Project #16-09 Final Report, (2019).
  12. K. Leonard, "United States Department of Transportation Annual Modal Research Plans", OST-R CRS&SI Technologies Program, (2019).
  13. A. Alhasan, K. Younkin, D. J. White, "Comparison of Roadway Roughness Derived from Lidar and SFM 3D Point Clouds", Iowa State University Digital Repository InTrans Project Reports, (2015).
  14. A. Habib, Y. Lin, R. Ravi, T. Shamseldin and M. Elbahnasawy, "LiDAR-Based Mobile Mapping System for Lane Width Estimation in Work Zones" JOINT TRANSPORTATION RESEARCH PROGRAM, (2018).
  15. Y. Turkan, M. J. Olsen, J. A. Gambatese, "Project Progress Tracking using LiDAR and 4D Design Models", Oregon DOT Tech Report, FHWA-OR-RD-19-12, (2019).
  16. S. F leishman, D. Cohen-Or, C. . Silva, "Robust Moving Least-squares Fitting with Sharp Features", ACM Transactions on Graphics, 24(3), pp.544-552, (2005). https://doi.org/10.1145/1073204.1073227
  17. J. W. Park, W. G. Yun, S. S. Kim, J. H. Song, "A Study on 3D Geospatial Information Model based Influence Factor Management Application in Earthwork Plan", The Korean Society of Industry Convergence, 22(2), pp.125-135, (2019).