과제정보
본 연구는 한국생산기술연구원의 기업수요기반생산기술실용화사업(JA-23-0014)의 지원으로 수행되었습니다.
참고문헌
- T.M. Pollock, A.J. Clarke and S.S. Babu, "Design and tailoring of alloys for additive manufacturing", Metall. Mater. Trans. A 51 (2020) 6000.
- J.J. Beaman, D.L. Bourell, C.C. Seepersad and D. Kovar, "Additive manufacturing review: Early past to current practice", J. Manuf. Sci. Eng. 142 (2020) 110812.
- J.P. Oliveira, A.D. LaLonde and J. Ma, "Processing parameters in laser powder bed fusion metal additive manufacturing", Mater. Des. 193 (2020) 108762.
- L.E. Murr, S.A. Quinones, S.M. Gaytan, M.I. Lopez, A. Rodela, E.Y. Martinez, D.H. Hernandez, E. Martinez, F. Medina and R.B. Wicker, "Microstructure and mechanical behavior of Ti-6Al-4V produced by rapid-layer manufacturing for biomedical applications", J. Mech. Behav. Biomed. Mater. 2 (2009) 20.
- Y. Li, C. Yang, H. Zhao, S. Qu, X. Li and Y. Li, "New developments of Ti-based alloys for biomedical applications", Materials (Basel) 7 (2014) 1709.
- M.J. Donachie, "Titanium: A technical guide", 2nd ed., (ASM International, 2000).
- T. Nagase, T. Hori, M. Todai, S.H. Sung and T. Nakano, "Additive manufacturing of dense components in beta-titanium alloys with crystallographic texture from a mixture of pure metallic element powders", Mater. Des. 173 (2019) 107771.
- Z.C. Fang, Z.L. Wu, C.G. Huang and C.W. Wu, "Review on residual stress in selective laser melting additive manufacturing of alloy parts", Opt. Laser Technol. 129 (2020) 106283.
- M. Megahed, H.W. Mindt, N. N'Dri, H. Duan and O. Desmaison, "Metal additive-manufacturing process and residual stress modeling", Integr. Mater. Manuf. Innov. 5 (2016) 61.
- S.G. Chen, H.J. Gao, Y.D. Zhang, Q. Wu, Z.H. Gao and X. Zhou, "Review on residual stresses in metal additive manufacturing: formation mechanisms, parameter dependencies, prediction and control approaches", J. Mater. Res. Technol. 17 (2022) 2950.
- S.Q. Wu, Y.J. Lu, Y.L. Ga, T.T. Huang, C.Q. Zhao, J.J. Lin, S. Guo and J.X. Lin, "Microstructural evolution and microhardness of a selective-laser-melted Ti-6A-4V alloy after post heat treatment", J. Alloys Compd. 672 (2016) 643.
- G.B. Bang, J.H. Park, W.R. Kim, S.K. Hyun, H.K. Park, T.W. Lee and H.G. Kim, "Study on the effect of preheating temperature of SLM process on characteristics of CoCrMo alloy", Mater. Sci. Eng. A 841 (2022) 143020.
- J.H. Park, G.B. Bang, K.A. Lee, Y. Son, W.R. Kim and H.G. Kim, "Effect on microstructural and mechanical properties of Inconel 718 superalloy fabricated by selective laser melting with rescanning by low energy density", J. Mater. Res. Technol. 10 (2021) 785.
- Y. Liu, J. Shi and Y. Wang, "Evolution, control, and mitigation of residual stresses in additively manufactured metallic materials: A review", Adv. Eng. Mater. 25 (2023) 2300489.
- Z. Xiao, C. Chen, H. Zhu, Z. Hu, B. Nagarajan, L. Guo and X. Zeng, "Study of residual stress in selective laser melting of Ti6Al4V", Mater. Des. 193 (2020) 108846.