과제정보
이 연구는 산업통상자원부(MOTIE) 및 한국산업기술진흥원(KIAT)의 지원을 받아 수행된 연구입니다(P0018010, 2023).
참고문헌
- J. H. Lau, "Recent Advances and Trends in Advanced Packaging," in IEEE Transactions on Components, Packaging and Manufacturing Technology, vol. 12, no. 2, pp. 228-252, Feb (2022). https://doi.org/10.1109/TCPMT.2022.3144461
- Santosh Kumar, Status of Advanced Packaging Industry 2020, Yole Development (2020).
- Tsai, W. S., Huang, C. Y., Chung, C. K., Yu, K. H., & Lin, C. F. Generational changes of flip chip interconnection technology. Proceedings of Technical Papers - International Microsystems, Packaging, Assembly, and Circuits Technology Conference, IMPACT, 2017-Octob(153), 306-310 (2017).
- Nokibul Islam, M-C Hsieh, K. KeonTaek, V. Pandey,"Fine pitch Cu pillar Assembly Challenges for Advanced Flip Chip Package", International Wafer Level Packaged Conference, San Jose, CA, Oct (2017).
- Sk hynix, Competitive Edge of SKH'S HBM, Tech Seminar (2023).
- K. J. Cho, J. H. Kim, "Design and analysis of high bandwidth memory (HBM) interposer considering signal and power integrity (SI/PI) for terabyte/s bandwidth system", KAIST, EE-Theses_Master, p 56, Aug (2016).
- C. Zhiwen, Z. Jiaju, W. Shizhao, C.P. Wong, "Challenges and prospects for advanced packaging", Fundamental Research (2023)
- C. Drechsel, P. Carazzetti, C. Wang, K. Viehweger, J. Weichart and E. Strolz, "Optimum Rc Control and Productivity Boost in Wafer-Level Packaging Enabled by High- Throughput UBM/RDL Technology," 2023 IEEE 73rd Electronic Components and Technology Conference (ECTC), Orlando, FL, USA, pp. 126-131 (2023).
- Heterogenous Integration Roadmap, Wafer-Level Packaging(WLP), Ch23 (2021).
- L.Y Gao, C.F Li, P. Wan, H. Zhang, Z.Q Liu, "The diffusion barrier effect of Fe-Ni UBM as compared to the commercial Cu UBM during high temperature storage," Journal of Alloys and Compounds, Volume 739 (2018).
- K.S Choi, H.S Lee, H.C Bae, Y.S Oem, "Recent Trends of Flip Chip Bonding Technology," 2013 Electronics and Telecommunications Trends, ETRI, Volume 28, no.5 (2013).
- Zainudin, W.Z.Z.W., Yong, T.C., Hui, T.C. et al. Optimization of reflow profile for copper pillar with SAC305 solder cap FCCSP. J Mater Sci: Mater Electron 34, 187 (2023).
- Kung Chuan, K. C., Sutiono, S., Senthil, B., Tim Tiam, K. G., Sig, K. S., Kumar, R. S., Fen, Z. R., & Li -San, C. Voids Reduction in Fine Pitch SiP assembly through optimization of reflow parameters. 2020 IEEE 22nd Electronics Packaging Technology Conference (EPTC), 291-296 (2020).
- S. M. Yeo, H. -K. Yow, K. H. Yeoh and S. H. b. Ishak, "Vacuum Reflow Process Optimization for Solder Void Size Reduction in Semiconductor Packaging Assembly," in IEEE Transactions on Components, Packaging and Manufacturing Technology, vol. 12, no. 8, pp. 1410-1420, Aug (2022). https://doi.org/10.1109/TCPMT.2022.3189995
- I. Kaban, S. Mhiaoui, W. Hoyer, and J.-G. Gasser, "Surface tension and density of binary lead and lead-free SN-based solders," J. Phys. Condens. Matter, vol. 17, no. 50, p. 7867, Dec. (2005).
- K. Sweatman, T. Nishimura, K. Sugimoto, and A. Kita, "Controlling voiding mechanisms in the reflow soldering process," in Proc. IPC APEX Exp., Art. no. 149451126 (2016).
- Kumar, S., Mallik, S., Ekere, N. et al. Stencil printing behavior of lead-free Sn-3Ag-0.5Cu solder paste for wafer level bumping for Sub-100 ㎛ size solder bumps. Met. Mater. Int. 19, 1083-1090 (2013). https://doi.org/10.1007/s12540-013-5025-z
- C. -Y. Huang et al., "Analysis of Warpage and Stress Behavior in a Fine Pitch Multi-Chip Interconnection with Ultrafine-Line Organic Substrate (2.1D)," 2018 IEEE 68th Electronic Components and Technology Conference (ECTC), San Diego, CA, USA, pp. 631-637 (2018).
- A. Mackie, H. Jo, S.P Lim, "Flip-Chip Flux Evolution," IMAPS 2019, Boston, USA (2019).
- P. R. Chowdhury et al., "Assembly Process and Application Studies of Pre-Applied Underfill Non-Conductive Film (NCF) and Non-Conductive Paste (NCP) for Advanced Packages," 2021 IEEE 71st Electronic Components and Technology Conference (ECTC), San Diego, CA, USA, pp. 1971-1977 (2021).
- P. Sun, Y. Yan and L. CAO, "Thermal Compression Bonding Process Development for C2W Stacking in 3D Package," 2020 21st International Conference on Electronic Packaging Technology (ICEPT), Guangzhou, China, pp. 1-4 (2020).
- Samsung Electronis, Samsung Memory Tech Day 2023, Oct 20, Sab Jose, California, USA (2023).
- T. Nonaka et al., "High throughput thermal compression NCF bonding," 2014 IEEE 64th Electronic Components and Technology Conference (ECTC), Orlando, FL, USA, 2014, pp. 913-918 (2014).
- J. -W. Shin, Y. S. Kim, H. G. Lee, U. B. Kang, S. K. Seo and K. -W. Paik, "Effects of thermo-compression bonding parameters on joint formation of micro-bumps in non-conductive film (NCF)," 2015 IEEE 65th Electronic Components and Technology Conference (ECTC), San Diego, CA, USA (2015).
- S. Na et al., "Next Gen Laser Assisted Bonding (LAB) Technology," 2022 IEEE 72nd Electronic Components and Technology Conference (ECTC), San Diego, CA, USA, pp. 1991-1995 (2022).
- P. R. Chowdhury et al., "Thermo-mechanical Analysis of Thermal Compression Bonding Chip-Join Process," 2022 IEEE 72nd Electronic Components and Technology Conference (ECTC), San Diego, CA, USA, pp. 579-585 (2022).
- Alves Braganca, Wagno&Kyungoe, Kim & Youngcheol, Kim. Development of a laser-assisted bonding process for a flip-chip die with backside metallization (2020).
- I. Hsu, C. -Y. Chen, S. Lin, T. -J. Yu, N. Cho and M. -C. Hsieh, "7nm Chip-Package Interaction Study on a Fine Pitch Flip Chip Package with Laser Assisted Bonding and Mass Reflow Technology," 2019 IEEE 69th Electronic Components and Technology Conference (ECTC), Las Vegas, NV, USA, pp. 289-293 (2019).
- A. Kolbasow, T. Kubsch, M. Fettke, G. Friedrich and T. Teutsch, "Vertical Laser Assisted Bonding for Advanced "3.5D" Chip Packaging," 2019 IEEE 69th Electronic Components and Technology Conference (ECTC), Las Vegas, NV, USA, pp. 210-217 (2019).
- K. -S. Choi et al., "Enhanced Performance of Laser-Assisted Bonding with Compression (LABC) Compared with Thermal Compression Bonding (TCB) Technology," 2019 IEEE 69th Electronic Components and Technology Conference (ECTC), Las Vegas, NV, USA, pp. 197-203 (2019).
- J. Wuu et al., "3D V-Cache: the Implementation of a Hybrid-Bonded 64MB Stacked Cache for a 7nm x86-64 CPU," 2022 IEEE International Solid- State Circuits Conference (ISSCC), San Francisco, CA, USA, pp. 428-429 (2022).
- Lee, YG., McInerney, M., Joo, YC. et al. Copper Bonding Technology in Heterogeneous Integration. Electron. Mater. Lett. (2023).
- Min-Hsun Yu, Jia-Juen Ong, Dinh-Phuc Tran, WeiLan Chiu, Wei-You Hsu, Huai-En Lin, Yu-An Chen, Hsiang-Hou Tseng, Guan-You Shen, Shih-Chi Yang, Chih Chen, Low temperature Cu/SiO2 hybrid bonding via <111>-oriented nanotwinned Cu with Ar plasma surface modification, Applied Surface Science, Volume 636, 157854 (2023).
- Y. Kagawa et al., "Development of face-to-face and face-to-back ultra-fine pitch Cu-Cu hybrid bonding," 2022 IEEE 72nd Electronic Components and Technology Conference (ECTC), San Diego, CA, USA, pp. 306-311 (2022).
- M.-H. Roh, A. Sharma, J.-H. Lee, and J. P. Jung, "Extrusion Suppression of TSV Filling Metal by Cu-W Electroplating for Three-Dimensional Microelectronic Packaging", Metallurgical and Materials Transactions A, 46, 2051-2062 (2015). https://doi.org/10.1007/s11661-015-2801-z
- H. K. Seo, S. Eunkyung Kim, G. Kim, H. S. Park and Y. -B. Park, "Effects of two-step plasma treatment on Cu and SiO2 surfaces for 3D bonding applications," 2020 IEEE 70th Electronic Components and Technology Conference (ECTC), Orlando, FL, USA, pp. 1677-1683 (2020).
- W. -L. Chiu, O. -H. Lee, C. -W. Chiang and H. -H. Chang, "Low-Temperature Wafer-to-Wafer Hybrid Bonding by Nanocrystalline Copper," 2022 IEEE 72nd Electronic Components and Technology Conference (ECTC), San Diego, CA, USA, pp. 679-684 (2022).
- Cheng-Ta Ko, Kuan-Neng Chen, Low temperature bonding technology for 3D integration, Microelectronics Reliability, Volume 52, Issue 2, 2012, Pages 302-311 (2012). https://doi.org/10.1016/j.microrel.2011.03.038
- Chien-Min Liu, Han-wen Lin, Yi-Cheng Chu, Chih Chen, Dian-Rong Lyu, Kuan-Neng Chen, K.N. Tu, Low-temperature direct copper-to-copper bonding enabled by creep on highly (111)-oriented Cu surfaces, Scripta Materialia, Volumes 78-79, Pages 65-68 (2014). https://doi.org/10.1016/j.scriptamat.2014.01.040
- Tanaka, K.; Wang, W.-S.; Baum, M.; Froemel, J.; Hirano, H.; Tanaka, S.; Wiemer, M.; Otto, T. Investigation of Surface Pre-Treatment Methods for Wafer-Level Cu-Cu Thermo-Compression Bonding, Micromachines, 7, 234 (2016).
- J Fan, D F Lim, C S Tan, Effects of surface treatment on the bonding quality of wafer-level Cu-to-Cu thermo-compression bonding for 3D integration, Journal of Micromechanics and Microengineering, Volume 23, Number 4, 045025 (2013)
- Nabil G. Mistkawi, Makarem A. Hussein, Malgorzata Ziomek-Moroz, Shankar B. Rananavare, Corrosion Behavior of Copper Thin Films in Organic HF-Containing Cleaning Solution for Semiconductor Applications, Journal of Electrochemical Society, Volume 157, Number 1 (2010).
- Qiushi Kang, Ge Li, Zhengda Li, Yanhong Tian, Chenxi Wang, Surface co-hydrophilization via ammonia inorganic strategy for low-temperature Cu/SiO2 hybrid bonding, Journal of Materials Science & Technology, Volume 149, Pages 161-166 (2023). https://doi.org/10.1016/j.jmst.2022.12.012
- Jia-Juen Ong, Dinh-Phuc Tran, Wei-Lan Chiu, Shih-Chi Yang, Min-Hsun Yu, Fang-Chun Shen, Hsiang-Hung Chang, Ou-Hsiang Lee, Chia-Wen Chiang, Chin-Hung Wang, Wen-Wei Wu, Chih Chen, Potassium hydroxide surface modification for low temperature Cu/SiO2 hybrid bonding, Surfaces and Interfaces, Volume 40, 103076 (2023).
- Lee, Jae Hak & Ha, Tae & Lee, Chang & Song, Jun-Yeob & Yoo, Choong. Low temperature hybrid bonding using self-alignment (2010).
- J. P. Mudrick, J. A. Sierra-Suarez, M. B. Jordan, T. A. Friedmann, R. Jarecki and M. D. Henry, "Sub-10㎛ Pitch Hybrid Direct Bond Interconnect Development for Die-to-Die Hybridization," 2019 IEEE 69th Electronic Components and Technology Conference (ECTC), Las Vegas, NV, USA, pp. 648-654 (2019).