DOI QR코드

DOI QR Code

Buckling of axially graded columns with varying power-law gradients

  • Li, X.F. (School of Civil Engineering, Central South University) ;
  • Lu, L. (School of Civil Engineering, Central South University) ;
  • Hu, Z.L. (School of Civil Engineering, Central South University) ;
  • Huang, Y. (School of Mathematics and Big Data, Foshan University) ;
  • Xiao, B.J. (School of Civil Engineering, Central South University)
  • 투고 : 2021.11.30
  • 심사 : 2022.11.14
  • 발행 : 2022.11.25

초록

This paper studies the static stability of an axially graded column with the power-law gradient varying along the axial direction. For a nonhomogeneous column with one end linked to a rotational spring and loaded by a compressive force, respectively, an Euler problem is analyzed by solving a boundary value problem of an ordinary differential equation with varying coefficients. Buckling loads through the characteristic equation with the aid of the Bessel functions are exactly given. An alternative way to approximately determine buckling loads through the integral equation method is also presented. By comparing approximate buckling loads with the exact ones, the approximate solution is simple in form and enough accurate for varying power-law gradients. The influences of the gradient index and the rotational spring stiffness on the critical forces are elucidated. The critical force and mode shapes at buckling are presented in graph. The critical force given here may be used as a benchmark to check the accuracy and effectiveness of numerical solutions. The approximate solution provides a feasible approach to calculating the buckling loads and to assessing the loss of stability of columns in engineering.

키워드

참고문헌

  1. Abo-bakr, R.M., Abo-bakr, H.M., Mohamed, S.A. and Eltaher, M.A. (2021), "Optimal weight for buckling of FG beam under variable axial load using Pareto optimality", Compos. Struct., 258, 113193. https://doi.org/10.1016/j.compstruct.2020.113193.
  2. Akgoz, B. (2019), ''Static stability analysis of axially functionally graded tapered micro columns with different boundary conditions", Steel Compos. Struct., 33(1), 133-142. https://doi.org/10.12989/SCS.2019.33.1.133.
  3. Alazwari, M.A., Daikh, A.A., Houari, M.S.A., Tounsi, A. and Etahel, M.A. (2021), "On static buckling of multilayered carbon nanotubes reinforced composite nanobeams supported on nonlinear elastic foundations", Steel Compos. Struct., 40(3), 389- 404. https://doi.org/10.12989/scs.2021.40.3.389.
  4. Antony, F., Schimleck, L. R., Jordan, L., Daniels, R.F. and III, A. C. (2012), ''Modeling the effect of initial planting density on within tree variation of stiffness in loblolly pine", Ann. For. Sci., 69, 641-650. https://doi.org/10.1007/s13595-011-0180-1.
  5. Bruchert, F., Becker, G. and Speck, T. (2000), ''The mechanics of Norway spruce [Picea abies (L.) Karst]: Mechanical properties of standing trees from different thinning regimes", For. Ecol. Manage., 135, 45-62. https://doi.org/10.1016/s0378-1127(00)00297-8.
  6. Chai, Y.H. and Wang, C.M. (2006), ''An application of differential transformation to stability analysis of heavy columns", Int. J. Struct. Stab. Dyn., 6, 317-332. https://doi.org/10.1142/s0219455406001988.
  7. Durmaz, S. and Okay, O. (2001), ''Inhomogeneities in poly(acrylamide) gels: position-dependent elastic modulus measurements", Polym. Bull., 46, 409-418. https://doi.org/10.1007/s002890170050.
  8. Ebrahimi-Mamaghani, A., Sotudeh-Gharebagh, R., Zarghami, R., and Mostou, N. (2020), "Thermo-mechanical stability of axially graded rayleigh pipes", Mech. Based Des. Struct. Mach., 1-30. http://dx.doi.org/10.1080/15397734.2020.1717967.
  9. Elishakoff, I. (2001), ''Inverse buckling problem for inhomogeneous columns", Int. J. Solids Struct., 38(3), 457-464. https://doi.org/10.1016/s0020-7683(00)00049-4.
  10. Elishakoff, I. and Bert, C.W. (1988), ''Comparison of Rayleigh's noninteger-power method with Rayleigh-Ritz method", Comput. Meth. Appl. Mech. Eng., 67(3), 297-309. https://doi.org/10.1016/0045-7825(88)90050-3.
  11. Elishakoff, I. and Endres, J. (2005), ''Extension of Euler's problem to axially graded columns: Two hundred and sixty years later", J. Intell. Mater. Syst. Struct., 16(1), 77-83. https://doi.org/10.1177/1045389x05047598.
  12. Eltaher, M.A. and Mohamed, S.A. (2020), "Buckling and stability analysis of sandwich beams subjected to varying axial loads", Steel Compos. Struct., 34(2), 241-260. https://doi.org/10.12989/scs.2020.34.2.241.
  13. Essien, C., Via, B.K., Cheng, Q., Gallagher, T., McDonald, T. and Eckhardt, L. (2018), ''Determining the predictive accuracy of whole tree modulus of elasticity (MOE) of 14-year-old loblolly pine using density and dynamic MOEs estimated by three different acoustic tools", Eur. J. Wood Wood Prod., 76, 1535-1546. https://doi.org/10.1007/s00107-018-1317-9.
  14. Hamed, M.A. Mohamed, S. and Eltaher, M.A. (2020), "Buckling analysis of sandwich beam rested on elastic foundation and subjected to varying axial in-plane loads", Steel Compos. Struct., 34(1), 75-89. https://doi.org/10.12989/scs.2020.34.1.075.
  15. Huang, Y. and Li, X.F. (2010), ''Buckling of functionally graded circular columns including shear deformation", Mater. Des., 31(7), 3159-3166. https://doi.org/10.1016/j.matdes.2010.02.032.
  16. Huang, Y. and Li, X.F. (2011), ''Buckling analysis of nonuniform and axially graded columns with varying flexural rigidity", J. Eng. Mech. ASCE, 137(1), 73-81. https://doi.org/10.1061/(asce)em.1943-7889.0000206.
  17. Ioakimidis, N.I. (2018), ''The energy method in problems of buckling of bars with quantifier elimination", Structures, 13, 47-65. https://doi.org/10.1016/j.istruc.2017.08.002.
  18. Lee, B.K., Carr, A.J., Lee, T.E. and Kim, I.J. (2006), ''Buckling loads of columns with constant volume", J. Sound Vib., 294(1-2), 381-387. https://doi.org/10.1016/j.jsv.2005.11.004.
  19. Lee, J.K. and Lee, B.K. (2019), "Free vibration and buckling of tapered columns made of axially functionally graded materials", Appl. Math. Modell., 75, 73-87. http://dx.doi.org/10.1016/j.apm.2019.05.010.
  20. Li, X.F., Xi, L.Y. and Huang, Y. (2011), "Stability analysis of composite columns and parameter optimization against buckling", Compos. B. Eng., 42, 1337-1345. http://dx.doi.org/10.1016/j.compositesb.2011.06.012.
  21. Liu, D., Chen, D., Yang, J. and Kitipornchai, S. (2021), "Buckling and free vibration of axially functionally graded graphene reinforced nanocomposite beams", Eng. Struct., 249, 113327. http://dx.doi.org/10.1016/j.engstruct.2021.113327.
  22. Melaibari, A., Khoshaim, A.B., Mohamed, S.A. and Eltaher, M.A. (2020), ''Static stability and of symmetric and sigmoid functionally graded beam under variable axial load", Steel Compos. Struct., 35(5), 671-685. https://doi.org/10.12989/SCS.2020.35.5.671.
  23. Rahmani, O., Refaeinejad, V. and Hosseini, S. (2017), ''Assessment of various nonlocal higher order theories for the bending and buckling behavior of functionally graded nanobeams", Steel Compos. Struct., 23(3), 339-350. https://doi.org/10.12989/SCS.2017.23.3.339.
  24. Raymond Carolyn, A. and Joe, B., Anderson, D.W. and Watt, D.J. (2008), ''Effect of thinning on relationships between three measures of wood stiffness in Pinus radiata : standing trees vs. logs vs. short clear specimens", Can. J. For. Res., 38, 2870- 2879. https://doi.org/10.1139/x08-124.
  25. Storch, J. and Elishakoff, I. (2018), ''Buckling of axially graded columns: A fifth-order polynomial mode shape", AIAA J.. 56(6), 2509-2513. https://doi.org/10.2514/1.j056488.
  26. Storch, J. and Elishakoff, I. (2021), "Buckling of axially graded nonlocal columns: Closed-form solutions", AIAA J., 59(3), 1119-1124. http://dx.doi.org/10.2514/1.J059941.
  27. Sun, D.L., Li, X.F. and Wang, C.Y. (2016), ''Buckling of standing tapered Timoshenko columns with varying flexural rigidity under combined loadings", Int. J. Struct. Stab. Dyn., 16(6), 1550017. https://doi.org/10.1142/s0219455415500170.
  28. Tagrara, S., Benachour, A., Bouiadjra, M.B. and Tounsi, A. (2015), ''On bending, buckling and vibration responses of functionally graded carbon nanotube-reinforced composite beams", Steel Compos. Struct., 19(5), 1259-1277. https://doi.org/10.12989/SCS.2015.19.5.1259.
  29. Wang, C.Y. (2003), ''Effect of base fixity on buckling of heavy column with end load", J. Eng. Mech., 129(1), 117-119. https://doi.org/10.1061/(asce)0733-9399(2003)129:1(117).
  30. Wei, D.J., Yan, S.X., Zhang, Z.P. and Li, X.F. (2010), ''Critical load for buckling of non-prismatic columns under self-weight and tip force", Mech. Res. Commun., 37(6), 554-558. https://doi.org/10.1016/j.mechrescom.2010.07.024.
  31. Xiao, B.J. and Li, X.F. (2019), ''Exact solution of buckling load of axially exponentially graded columns and its approximation", Mech. Res. Commun., 101, 103414. https://doi.org/10.1016/j.mechrescom.2019.103414.