Advances in nano research

  • 제13권4호
  • /
  • Pages.379-391
  • /
  • 2022
  • /
  • 2287-237X(pISSN)
  • /
  • 2287-2388(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Impact of the geometric properties of intracranial vascular bifurcation and the mechanism of aneurysm occurrence and rupture

  • Liu, Jun (The Second Affiliated Hospital, Wannan Medical College) ;
  • Zhang, Qingyun (Ma An Shan General Hospital of Ranger-Duree Healthcare) ;
  • Chen, Hua (The First Affiliated Hospital, Nanjing Medical University)
  • 투고 : 2021.09.04
  • 심사 : 2022.06.27
  • 발행 : 2022.10.25
⟨ 이전 논문 다음 논문 ⟩

초록

One factor that can heighten the risk of the rapture intracranial aneurysm (IA) is bifurcations, which can cause the IA to evaluate. This study presents the effect of geometric of intracranial vascular on the bifurcation analysis of the aneurysm occurrence. The aneurysm mechanism is mathematically modeled based on the nano pipe structures under the thermal stresses, and the impact of the aneurysm geometric on the stability and bifurcation points is analyzed. Because of the dimension of these structures, the classical theories could not predict their behavior perfectly, so the nonclassical and nonlocal theories are required for the mechanical modeling of the aneurysm. The presented results show that the bifurcation point of the aneurysm mechanism is dependent on the environment temperature, and the temperature change plays an essential role in the stability of these structures.

키워드

과제정보

This work was supported by 2021 key scientific research project of Anhui Provincial Health Commission, research on geometric characteristics of intracranial vascular bifurcation and mechanism of aneurysm occurrence and rupture, AHWJ2021a038; and 2022 Talent Fund of Peak Climbing Program of the Second Affiliated Hospital of Wannan Medical College (DFJH2022006) and the university-level scientific research Fund of Wannan Medical College in 2020 (WK2020ZF24).

참고문헌

  1. Adamian, A., Safari, K.H., Sheikholeslami, M., Habibi, M., AlFurjan, M. and Chen, G. (2020), "Critical temperature and frequency characteristics of GPLs-reinforced composite doubly curved panel", Appl. Sci., 10(9), 3251. https://doi.org/10.3390/app10093251.
  2. Al-Furjan, M., Dehini, R., Khorami, M., Habibi, M. and won Jung, D. (2020a), "On the dynamics of the ultra-fast rotating cantilever orthotropic piezoelectric nanodisk based on nonlocal strain gradient theory", Compos. Struct., 112990. https://doi.org/10.1016/j.compstruct.2020.112990.
  3. Al-Furjan, M., Fereidouni, M., Habibi, M., Abd Ali, R., Ni, J. and Safarpour, M. (2020b), "Influence of in-plane loading on the vibrations of the fully symmetric mechanical systems via dynamic simulation and generalized differential quadrature framework", Eng. Comput., 1-23. https://doi.org/10.1007/s00366-020-01177-7.
  4. Al-Furjan, M., Fereidouni, M., Sedghiyan, D., Habibi, M. and won Jung, D. (2020c), "Three-dimensional frequency response of the CNT-Carbon-Fiber reinforced laminated circular/annular plates under initially stresses", Compos. Struct., 113146. https://doi.org/10.1016/j.compstruct.2020.113146.
  5. Al-Furjan, M., Habibi, M., won Jung, D. and Safarpour, H. (2020d), "Vibrational characteristics of a higher-order laminated composite viscoelastic annular microplate via modified couple stress theory", Compos. Struct., 113152. https://doi.org/10.1016/j.compstruct.2020.113152.
  6. Al-Furjan, M., Oyarhossein, M.A., Habibi, M., Safarpour, H. and Jung, D.W. (2020e), "Frequency and critical angular velocity characteristics of rotary laminated cantilever microdisk via twodimensional analysis", Thin Wall. Struct., 157, 107111. https://doi.org/10.1016/j.tws.2020.107111.
  7. Alipour, M., Torabi, M.A., Sareban, M., Lashini, H., Sadeghi, E., Fazaeli, A., Habibi, M. and Hashemi, R. (2020), "Finite element and experimental method for analyzing the effects of martensite morphologies on the formability of DP steels", Mech. Based Des. Struct., 48(5), 525-541. https://doi.org/10.1080/15397734.2019.1633343.
  8. AminPour, H. and Rizzi, N. (2015), "A one-dimensional continuum with microstructure for single-wall carbon nanotubes bifurcation analysis", Math. Mech. Solids, 21(2), 168-181. https://doi.org/10.1177/1081286515577037.
  9. Azimi, M., Mirjavadi, S.S., Shafiei, N. and Hamouda, A.M.S. (2016), "Thermo-mechanical vibration of rotating axially functionally graded nonlocal Timoshenko beam", Appl. Phys. A, 123(1), 104. https://doi.org/10.1007/s00339-016-0712-5.
  10. Azimi, M., Mirjavadi, S.S., Shafiei, N., Hamouda, A.M.S. and Davari, E. (2018), "Vibration of rotating functionally graded Timoshenko nano-beams with nonlinear thermal distribution", Mech. Adv. Mater. Struct., 25(6), 467-480. https://doi.org/10.1080/15376494.2017.1285455.
  11. Bai, Y., Alzahrani, B., Baharom, S. and Habibi, M. (2020), "Seminumerical simulation for vibrational responses of the viscoelastic imperfect annular system with honeycomb core under residual pressure", Eng. Comput., 1-26. https://doi.org/10.1007/s00366-020-01191-9.
  12. Bijlenga, P., Ebeling, C., Jaegersberg, M., Summers, P., Rogers, A., Waterworth, A., Iavindrasana, J., Macho, J., Pereira, V.M., Bukovics, P., Vivas, E., Sturkenboom, M.C.J.M., Wright, J., Friedrich, C.M., Frangi, A., Byrne, J., Schaller, K., Rufenacht, D., null, n., Narata, A.P., Clarke, A., Yarnold, J., Kover, F., Schatlo, B., Hudak, S., Teta, P., Blasco, J., Gonzalez, A.M., Lovblad, K.-O., Coley, S., Doczi, T., Risselada, R., Sola, T., Lawford, P., Patel, U., Singh, P., Wickins, J., Elger, B., Beyleveld, D., Wood, S., Hasselmeyer, P., Arbona, A., Meyer, R., Hose, R., Lonsdale, G., Hofmann-Apitius, M., null, n., null, n., Frangi, A., Bijlenga, P., Hofmann-Apitius, M., Hose, R., Lonsdale, G., Arbona, A., Hasselmeyer, P., Rufenacht, D., null, n., Bijlenga, P., Summers, P., Jagersberg, M., Rogers, A., Schaller, K., Byrne, J., null, n., Wright, J., Wilkins, J., Beyleveld, D., Elger, B., null, n., Waterworth, A., Wood, S., Iavindrasana, J., Meyer, R., Friedrich, C., Ebeling, C., null, n., Ebeling, C., Bijlenga, P., Risselada, R., Friedrich, C., Sturkenboom, M.C.J.M., null, n., Bijlenga, P., Jagersberg, M., Rogers, A., Schatlo, B., Teta, P., Schaller, K., Mendes-Pereira, V., Gonzalez, A.M., Narata, A.P., Lovblad, K.O., Rufenacht, D.A., Yarnold, J., Summers, P., Clarke, A., Zilani, G., Byrne, J., Macho, J., Blasco, J., Bukovics, P., Kover, F., Hudak, I., Doczi, T., Risselada, R., Sturkenboom, M.C.J.M., Singh, P., Waterworth, A., Patel, U., Coley, S., Lawford, P., Sola, T. and Vivas, E. (2013), "Risk of rupture of small anterior communicating artery aneurysms is similar to posterior circulation aneurysms", Stroke, 44(11), 3018-3026. https://doi.org/10.1161/STROKEAHA.113.001667.
  13. Brunozzi, D., Theiss, P., Andrews, A., Amin-Hanjani, S., Charbel, F.T. and Alaraj, A. (2019), "Correlation between laminar wall shear stress and growth of unruptured cerebral aneurysms: In vivo assessment", World Neurosurgery, 131, 599-605. https://doi.org/10.1016/j.wneu.2019.08.005.
  14. Cao, Z., Wang, Y., Zheng, W., Yin, L., Tang, Y., Miao, W., Liu, S. and Yang, B. (2022), "The algorithm of stereo vision and shape from shading based on endoscope imaging", Biomed. Signal Pr. Control, 76, 103658. https://doi.org/10.1016/j.bspc.2022.103658.
  15. Chen, F., Chen, J., Duan, R., Habibi, M. and Khadimallah, M.A. (2022), "Investigation on dynamic stability and aeroelastic characteristics of composite curved pipes with any yawed angle", Compos. Struct., 115195. https://doi.org/10.1016/j.compstruct.2022.115195.
  16. Dai, Z., Jiang, Z., Zhang, L. and Habibi, M. (2021a), "Frequency characteristics and sensitivity analysis of a size-dependent laminated nanoshell", Adv. Nano Res., 10(2), 175. https://doi.org/10.12989/anr.2021.10.2.175.
  17. Dai, Z., Zhang, L., Bolandi, S.Y. and Habibi, M. (2021b), "On the vibrations of the non-polynomial viscoelastic composite opentype shell under residual stresses", Compos. Struct., 113599. https://doi.org/10.1016/j.compstruct.2021.113599.
  18. Duan, Z., Li, Y., Guan, S., Ma, C., Han, Y., Ren, X., Wei, L., Li, W., Lou, J. and Yang, Z. (2018), "Morphological parameters and anatomical locations associated with rupture status of small intracranial aneurysms", Sci. Rep., 8(1), 6440. https://doi.org/10.1038/s41598-018-24732-1.
  19. Ebrahimi, F. and Barati, M.R. (2018), "Hygro-thermal vibration analysis of bilayer graphene sheet system via nonlocal strain gradient plate theory", J. Brazil. Soc. Mech. Sci. Eng., 40(9), 428. https://doi.org/10.1007/s40430-018-1350-y.
  20. Ebrahimi, F., Habibi, M. and Safarpour, H. (2019a), "On modeling of wave propagation in a thermally affected GNP-reinforced imperfect nanocomposite shell", Eng. Comput., 35(4), 1375-1389. https://doi.org/10.1007/s00366-018-0669-4.
  21. Ebrahimi, F., Hajilak, Z.E., Habibi, M. and Safarpour, H. (2019b), "Buckling and vibration characteristics of a carbon nanotubereinforced spinning cantilever cylindrical 3D shell conveying viscous fluid flow and carrying spring-mass systems under various temperature distributions", Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 233(13), 4590-4605. https://doi.org/10.1177/0954406219832323.
  22. Ebrahimi, F., Hashemabadi, D., Habibi, M. and Safarpour, H. (2020a), "Thermal buckling and forced vibration characteristics of a porous GNP reinforced nanocomposite cylindrical shell", Microsyst. Technol., 26(2), 461-473. https://doi.org/10.1007/s00542-019-04542-9.
  23. Ebrahimi, F., Mohammadi, K., Barouti, M.M. and Habibi, M. (2019c), "Wave propagation analysis of a spinning porous graphene nanoplatelet-reinforced nanoshell", Wave Random Complex Med., 1-27. https://doi.org/10.1080/17455030.2019.1694729.
  24. Ebrahimi, F. and Salari, E. (2015), "Thermal buckling and free vibration analysis of size dependent Timoshenko FG nanobeams in thermal environments", Compos. Struct., 128, 363-380. https://doi.org/10.1016/j.compstruct.2015.03.023.
  25. Ebrahimi, F. and Shafiei, N. (2016), "Application of Eringen's nonlocal elasticity theory for vibration analysis of rotating functionally graded nanobeams", Smart Struct. Syst., 17(5), 837-857. https://doi.org/10.12989/sss.2016.17.5.837.
  26. Ebrahimi, F. and Shafiei, N. (2017), "Influence of initial shear stress on the vibration behavior of single-layered graphene sheets embedded in an elastic medium based on Reddy's higherorder shear deformation plate theory", Mech. Adv. Mater. Struct., 24(9), 761-772. https://doi.org/10.1080/15376494.2016.1196781.
  27. Ebrahimi, F., Shafiei, N., Kazemi, M. and Mousavi Abdollahi, S.M. (2017), "Thermo-mechanical vibration analysis of rotating nonlocal nanoplates applying generalized differential quadrature method", Mech. Adv. Mater. Struct., 24(15), 1257-1273. https://doi.org/10.1080/15376494.2016.1227499.
  28. Ebrahimi, F., Supeni, E.E.B., Habibi, M. and Safarpour, H. (2020b), "Frequency characteristics of a GPL-reinforced composite microdisk coupled with a piezoelectric layer", Eur. Phys. J. Plus, 135(2), 144. https://doi.org/10.1140/epjp/s13360-020-00217-x.
  29. Ehyaei, J., Akbarshahi, A. and Shafiei, N. (2017), "Influence of porosity and axial preload on vibration behavior of rotating FG nanobeam", Adv. Nano Res., 5(2), 141-169. https://doi.org/10.12989/anr.2017.5.2.141.
  30. Esmailpoor Hajilak, Z., Pourghader, J., Hashemabadi, D., Sharifi Bagh, F., Habibi, M. and Safarpour, H. (2019), "Multilayer GPLRC composite cylindrical nanoshell using modified strain gradient theory", Mech. Based Des. Struct., 47(5), 521-545. https://doi.org/10.1080/15397734.2019.1566743.
  31. Fakher, M., Behdad, S., Naderi, A. and Hosseini-Hashemi, S. (2020), "Thermal vibration and buckling analysis of two-phase nanobeams embedded in size dependent elastic medium", Int. J. Mech. Sci., 171, 105381. https://doi.org/10.1016/j.ijmecsci.2019.105381.
  32. Ghadiri, M., Hosseini, S.H.S. and Shafiei, N. (2016a), "A power series for vibration of a rotating nanobeam with considering thermal effect", Mech. Adv. Mater. Struct., 23(12), 1414-1420. https://doi.org/10.1080/15376494.2015.1091527.
  33. Ghadiri, M., Mahinzare, M., Shafiei, N. and Ghorbani, K. (2017a), "On size-dependent thermal buckling and free vibration of circular FG Microplates in thermal environments", Microsyst. Technol., 23(10), 4989-5001. https://doi.org/10.1007/s00542-017-3308-x.
  34. Ghadiri, M. and Shafiei, N. (2016a), "Nonlinear bending vibration of a rotating nanobeam based on nonlocal Eringen's theory using differential quadrature method", Microsyst. Technol., 22(12), 2853-2867. https://doi.org/10.1007/s00542-015-2662-9.
  35. Ghadiri, M. and Shafiei, N. (2016b), "Vibration analysis of a nano-turbine blade based on Eringen nonlocal elasticity applying the differential quadrature method", J. Vib. Control, 23(19), 3247-3265. https://doi.org/10.1177/1077546315627723.
  36. Ghadiri, M. and Shafiei, N. (2016c), "Vibration analysis of rotating functionally graded Timoshenko microbeam based on modified couple stress theory under different temperature distributions", Acta Astronaut., 121, 221-240. https://doi.org/10.1016/j.actaastro.2016.01.003.
  37. Ghadiri, M., Shafiei, N. and Akbarshahi, A. (2016b), "Influence of thermal and surface effects on vibration behavior of nonlocal rotating Timoshenko nanobeam", Appl. Phys. A, 122(7), 673. https://doi.org/10.1007/s00339-016-0196-3.
  38. Ghadiri, M., Shafiei, N. and Alavi, H. (2017b), "Thermomechanical vibration of orthotropic cantilever and propped cantilever nanoplate using generalized differential quadrature method", Mech. Adv. Mater. Struct., 24(8), 636-646. https://doi.org/10.1080/15376494.2016.1196770.
  39. Ghadiri, M., Shafiei, N. and Alavi, H. (2017c), "Vibration analysis of a rotating nanoplate using nonlocal elasticity theory", J. Solid Mech., 9(2), 319-337.
  40. Ghadiri, M., Shafiei, N. and Alireza Mousavi, S. (2016c), "Vibration analysis of a rotating functionally graded tapered microbeam based on the modified couple stress theory by DQEM", Appl. Phys. A, 122(9), 837. https://doi.org/10.1007/s00339-016-0364-5.
  41. Ghadiri, M., Shafiei, N. and Babaei, R. (2017d), "Vibration of a rotary FG plate with consideration of thermal and Coriolis effects", Steel Compos. Struct., 25(2), 197-207. https://doi.org/10.12989/SCS.2017.25.2.197.
  42. Ghadiri, M., Shafiei, N. and Safarpour, H. (2017e), "Influence of surface effects on vibration behavior of a rotary functionally graded nanobeam based on Eringen's nonlocal elasticity", Microsyst. Technol., 23(4), 1045-1065. https://doi.org/10.1007/s00542-016-2822-6.
  43. Ghadiri, M., Shafiei, N., Salekdeh, S.H., Mottaghi, P. and Mirzaie, T. (2016d), "Investigation of the dental implant geometry effect on stress distribution at dental implant-bone interface", J. Brazil. Soc. Mech. Sci. Eng., 38(2), 335-343. https://doi.org/10.1007/s40430-015-0472-8.
  44. Ghazanfari, A., Soleimani, S.S., Keshavarzzadeh, M., Habibi, M., Assempuor, A. and Hashemi, R. (2020), "Prediction of FLD for sheet metal by considering through-thickness shear stresses", Mech. Based Des. Struct., 48(6), 755-772. https://doi.org/10.1080/15397734.2019.1662310.
  45. Gholampour, S. and Mehrjoo, S. (2021), "Effect of bifurcation in the hemodynamic changes and rupture risk of small intracranial aneurysm", Neurosurg. Rev., 44(3), 1703-1712. https://doi.org/10.1007/s10143-020-01367-3.
  46. Goncalves, R. and Camotim, D. (2007), "Thin-walled member plastic bifurcation analysis using generalised beam theory", Adv. Eng. Softw., 38(8), 637-646. https://doi.org/10.1016/j.advengsoft.2006.08.027.
  47. Guo, J., Baharvand, A., Tazeddinova, D., Habibi, M., Safarpour, H., Roco-Videla, A. and Selmi, A. (2021a), "An intelligent computer method for vibration responses of the spinning multilayer symmetric nanosystem using multi-physics modeling", Eng. Comput., 1-22. https://doi.org/10.1007/s00366-021-01433-4.
  48. Guo, X., Liu, Y. and Wang, G. (2021b), "Computer modeling for frequency performance of viscoelastic magneto-electro-elastic annular micro/nanosystem via adaptive tuned deep learning neural network optimization", Adv. Nano Res., 11(2), 203-218. https://doi.org/10.12989/anr.2021.11.2.203.
  49. Guo, Y., Mi, H. and Habibi, M. (2021c), "Electromechanical energy absorption, resonance frequency, and low-velocity impact analysis of the piezoelectric doubly curved system", Mech. Syst. Signal Pr., 157, 107723. https://doi.org/10.1016/j.ymssp.2021.107723.
  50. Habibi, M., Darabi, R., Sa, J.C.d. and Reis, A. (2021), "An innovation in finite element simulation via crystal plasticity assessment of grain morphology effect on sheet metal formability", Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications. 235(8), 1937-1951. https://doi.org/10.1177/14644207211024686.
  51. Habibi, M., Ghazanfari, A., Assempour, A., Naghdabadi, R. and Hashemi, R. (2017), "Determination of forming limit diagram using two modified finite element models", Mech. Eng., 48(4), 141-144. https://doi.org/10.22060/MEJ.2016.664.
  52. Habibi, M., Hashemabadi, D. and Safarpour, H. (2019a), "Vibration analysis of a high-speed rotating GPLRC nanostructure coupled with a piezoelectric actuator", Eur. Phys. J. Plus, 134(6), 307. https://doi.org/10.1140/epjp/i2019-12742-7.
  53. Habibi, M., Hashemi, R., Ghazanfari, A., Naghdabadi, R. and Assempour, A. (2018a), "Forming limit diagrams by including the M-K model in finite element simulation considering the effect of bending", Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications. 232(8), 625-636. https://doi.org/10.1177/1464420716642258.
  54. Habibi, M., Hashemi, R., Sadeghi, E., Fazaeli, A., Ghazanfari, A. and Lashini, H. (2016), "Enhancing the mechanical properties and formability of low carbon steel with dual-phase microstructures", J. Mater. Eng. Perform., 25(2), 382-389. https://doi.org/10.1007/s11665-016-1882-1.
  55. Habibi, M., Hashemi, R., Tafti, M.F. and Assempour, A. (2018b), "Experimental investigation of mechanical properties, formability and forming limit diagrams for tailor-welded blanks produced by friction stir welding", J. Manuf. Pr., 31, 310-323. https://doi.org/10.1016/j.jmapro.2017.11.009.
  56. Habibi, M., Mohammadgholiha, M. and Safarpour, H. (2019b), "Wave propagation characteristics of the electrically GNPreinforced nanocomposite cylindrical shell", J. Brazil. Soc. Mech. Sci. Eng., 41(5), 221. https://doi.org/10.1007/s40430-019-1715-x.
  57. Habibi, M., Mohammadi, A., Safarpour, H. and Ghadiri, M. (2019c), "Effect of porosity on buckling and vibrational characteristics of the imperfect GPLRC composite nanoshell", Mech. Based Des. Struct., 1-30. https://doi.org/10.1080/15397734.2019.1701490.
  58. Habibi, M., Mohammadi, A., Safarpour, H., Shavalipour, A. and Ghadiri, M. (2019d), "Wave propagation analysis of the laminated cylindrical nanoshell coupled with a piezoelectric actuator", Mech. Based Des. Struct., 1-19. https://doi.org/10.1080/15397734.2019.1697932.
  59. Habibi, M., Safarpour, M. and Safarpour, H. (2020), "Vibrational characteristics of a FG-GPLRC viscoelastic thick annular plate using fourth-order Runge-Kutta and GDQ methods", Mech. Based Des. Struct., 1-22. https://doi.org/10.1080/15397734.2020.1779086.
  60. Habibi, M., Taghdir, A. and Safarpour, H. (2019e), "Stability analysis of an electrically cylindrical nanoshell reinforced with graphene nanoplatelets", Compos. Part B Eng., 175, 107125. https://doi.org/10.1016/j.compositesb.2019.107125.
  61. Hajirayat, K., Gholampour, S., Sharifi, I. and Bizari, D. (2017), "Biomechanical simulation to compare the blood hemodynamics and cerebral aneurysm rupture risk in patients with different aneurysm necks", J. Appl. Mech. Tech. Phys., 58(6), 968-974. https://doi.org/10.1134/S0021894417060025.
  62. Haughton, D.M. and Ogden, R.W. (1979), "Bifurcation of inflated circular cylinders of elastic material under axial loading-I. Membrane theory for thin-walled tubes", J. Mech. Phys. Solids, 27(3), 179-212. https://doi.org/10.1016/0022-5096(79)90001-2.
  63. He, X., Ding, J., Habibi, M., Safarpour, H. and Safarpour, M. (2021), "Non-polynomial framework for bending responses of the multi-scale hybrid laminated nanocomposite reinforced circular/annular plate", Thin Wall. Struct., 166, 108019. https://doi.org/10.1016/j.tws.2021.108019.
  64. Hou, F., Wu, S., Moradi, Z. and Shafiei, N. (2021), "The computational modeling for the static analysis of axially functionally graded micro-cylindrical imperfect beam applying the computer simulation", Eng. Comput., 1-19. https://doi.org/10.1007/s00366-021-01456-x.
  65. Huang, X., Hao, H., Oslub, K., Habibi, M. and Tounsi, A. (2021a), "Dynamic stability/instability simulation of the rotary sizedependent functionally graded microsystem", Eng. Comput., 1-17. https://doi.org/10.1007/s00366-021-01399-3.
  66. Huang, X., Zhang, Y., Moradi, Z. and Shafiei, N. (2021b), "Computer simulation via a couple of homotopy perturbation methods and the generalized differential quadrature method for nonlinear vibration of functionally graded non-uniform microtube", Eng. Comput., 1-18. https://doi.org/10.1007/s00366-021-01395-7.
  67. Huang, X., Zhang, Y., Moradi, Z. and Shafiei, N. (2021c), "Computer simulation via a couple of homotopy perturbation methods and the generalized differential quadrature method for nonlinear vibration of functionally graded non-uniform microtube", Eng. Comput., 1-18. https://doi.org/10.1007/s00366-021-01395-7.
  68. Huang, X., Zhu, Y., Vafaei, P., Moradi, Z. and Davoudi, M. (2021d), "An iterative simulation algorithm for large oscillation of the applicable 2D-electrical system on a complex nonlinear substrate", Eng. Comput., 1-13. https://doi.org/10.1007/s00366-021-01320-y.
  69. Hussein, A.E., Shownkeen, M., Thomas, A., Stapleton, C., Brunozzi, D., Nelson, J., Naumgart, J., Linninger, A., Atwal, G. and Alaraj, A. (2020), "2D parametric contrast time-density analysis for the prediction of complete aneurysm occlusion at six months' post-flow diversion stent", Interv. Neuroradiol., 26(4), 468-475. https://doi.org/10.1177/1591019920908205.
  70. Ishibashi, T., Murayama, Y., Urashima, M., Saguchi, T., Ebara, M., Arakawa, H., Irie, K., Takao, H. and Abe, T. (2009), "Unruptured intracranial aneurysms", Stroke, 40(1), 313-316. https://doi.org/10.1161/STROKEAHA.108.521674.
  71. Jiao, J., Ghoreishi, S.M., Moradi, Z. and Oslub, K. (2021), "Coupled particle swarm optimization method with genetic algorithm for the static-dynamic performance of the magnetoelectro-elastic nanosystem", Eng. Comput., 1-15. https://doi.org/10.1007/s00366-021-01391-x.
  72. Kazemi, A. and Vatankhah, R. (2021), "Thermal vibration and nonlinear buckling of micro-plates under partial excitation", Eur. J. Mech. A Solids, 86, 104185. https://doi.org/10.1016/j.euromechsol.2020.104185.
  73. Kim, J.H., Suh, S.H., Chung, J., Oh, Y.J., Ahn, S.J. and Lee, K.Y. (2016), "Prevalence and characteristics of unruptured cerebral aneurysms in ischemic stroke patients", J. Stroke, 18(3), 321-327. https://doi.org/10.5853/jos.2016.00164.
  74. Kugo, H., Tanaka, H., Moriyama, T. and Zaima, N. (2018), "Pathological implication of adipocytes in AAA development and the rupture", Ann. Vasc. Diseases, ra-17. https://doi.org/10.3400/avd.ra.17-00130.
  75. Kumaravel, A., Ganesan, N. and Sethuraman, R. (2007), "Buckling and vibration analysis of layered and multiphase magneto-electro-elastic beam under thermal environment", Multidiscip. Model. Mater. Struct., 3(4), 461-476. https://doi.org/10.1163/157361107782106401.
  76. Lai, W.F., Gui, D., Wong, M., Doring, A., Rogach, A.L., He, T. and Wong, W.-T. (2021), "A self-indicating cellulose-based gel with tunable performance for bioactive agent delivery", J. Drug Deliv. Sci. Technol., 63, 102428. https://doi.org/10.1016/j.jddst.2021.102428.
  77. Lai, W.F., Tang, R. and Wong, W.T. (2020), "Ionically crosslinked complex gels loaded with oleic acid-containing vesicles for transdermal drug delivery", Pharmaceutics, 12(8). https://doi.org/10.3390/pharmaceutics12080725.
  78. Li, J., Tang, F. and Habibi, M. (2020a), "Bi-directional thermal buckling and resonance frequency characteristics of a GNPreinforced composite nanostructure", Eng. Comput., 1-22. https://doi.org/10.1007/s00366-020-01110-y.
  79. Li, X., Wang, T., Liu, F. and Zhu, Z. (2021), "Computer simulation of the nonlinear static behavior of axially functionally graded microtube with porosity", Adv. Nano Res., 11(4), 437-451. https://doi.org/10.12989/anr.2021.11.4.437.
  80. Li, Y., Li, S., Guo, K., Fang, X. and Habibi, M. (2020b), "On the modeling of bending responses of graphene-reinforced higher order annular plate via two-dimensional continuum mechanics approach", Eng. Comput., 1-22. https://doi.org/10.1007/s00366-020-01166-w.
  81. Liu, F., Zhu, Z., Li, X. and Xu, J. (2019), "Study on thermal stability and bifurcation analysis of FCC carbon nanotube-based nanolattice as hydrogen storage materials", Int. J. Hydrogen Energy, 44(56), 29597-29603. https://doi.org/10.1016/j.ijhydene.2019.03.065.
  82. Liu, H., Shen, S., Oslub, K., Habibi, M. and Safarpour, H. (2021a), "Amplitude motion and frequency simulation of a composite viscoelastic microsystem within modified couple stress elasticity", Eng. Comput., 1-15. https://doi.org/10.1007/s00366-021-01316-8.
  83. Liu, H., Zhao, Y., Pishbin, M., Habibi, M., Bashir, M. and Issakhov, A. (2021b), "A comprehensive mathematical simulation of the composite size-dependent rotary 3D microsystem via two-dimensional generalized differential quadrature method", Eng. Comput., 1-16. https://doi.org/10.1007/s00366-021-01419-2.
  84. Liu, Y., Tian, J., Hu, R., Yang, B., Liu, S., Yin, L. and Zheng, W. (2022), "Improved feature point pair purification algorithm based on sift during endoscope image stitching", Front. Neurorobot., 16, 840594-840594. https://doi.org/10.3389/fnbot.2022.840594.
  85. Liu, Y., Wang, W., He, T., Moradi, Z. and Larco Benitez, M.A. (2021c), "On the modelling of the vibration behaviors via discrete singular convolution method for a high-order sector annular system", Eng. Comput., 1-23. https://doi.org/10.1007/s00366-021-01454-z.
  86. Liu, Z., Su, S., Xi, D. and Habibi, M. (2020a), "Vibrational responses of a MHC viscoelastic thick annular plate in thermal environment using GDQ method", Mech. Based Des. Struct., 1-26. https://doi.org/10.1080/15397734.2020.1784201.
  87. Liu, Z., Wu, X., Yu, M. and Habibi, M. (2020b), "Large-amplitude dynamical behavior of multilayer graphene platelets reinforced nanocomposite annular plate under thermo-mechanical loadings", Mech. Based Des. Struct., 1-25. https://doi.org/10.1080/15397734.2020.1815544.
  88. Ma, L., Liu, X. and Moradi, Z. (2021), "On the chaotic behavior of graphene-reinforced annular systems under harmonic excitation", Eng. Comput., 1-25. https://doi.org/10.1007/s00366-020-01210-9.
  89. Ma, W.L., Li, X.F. and Lee, K.Y. (2020), "Third-order shear deformation beam model for flexural waves and free vibration of pipes", J. Acoust. Soc. Am., 147(3), 1634-1647. https://doi.org/10.1121/10.0000855.
  90. Mirjavadi, S.S., Afshari, B.M., Shafiei, N., Hamouda, A., Kazemi, M. and Structures, C. (2017a), "Thermal vibration of twodimensional functionally graded (2D-FG) porous Timoshenko nanobeams", Steel Compos. Struct., 25(4), 415-426. https://doi.org/10.12989/scs.2017.25.4.415.
  91. Mirjavadi, S.S., Matin, A., Shafiei, N., Rabby, S. and Mohasel Afshari, B. (2017b), "Thermal buckling behavior of twodimensional imperfect functionally graded microscale-tapered porous beam", J. Therm. Stress., 40(10), 1201-1214. https://doi.org/10.1080/01495739.2017.1332962.
  92. Mirjavadi, S.S., Mohasel Afshari, B., Shafiei, N., Rabby, S. and Kazemi, M. (2017c), "Effect of temperature and porosity on the vibration behavior of two-dimensional functionally graded micro-scale Timoshenko beam", J. Vib. Control, 24(18), 4211-4225. https://doi.org/10.1177/1077546317721871.
  93. Mirjavadi, S.S., Rabby, S., Shafiei, N., Afshari, B.M. and Kazemi, M. (2017d), "On size-dependent free vibration and thermal buckling of axially functionally graded nanobeams in thermal environment", Appl. Phys. A, 123(5), 315. https://doi.org/10.1007/s00339-017-0918-1.
  94. Mohammadgholiha, M., Shokrgozar, A., Habibi, M. and Safarpour, H. (2019), "Buckling and frequency analysis of the nonlocal strain-stress gradient shell reinforced with graphene nanoplatelets", J. Vib. Control, 25(19-20), 2627-2640. https://doi.org/10.1177/1077546319863251.
  95. Mohammadi, A., Lashini, H., Habibi, M. and Safarpour, H. (2019), "Influence of viscoelastic foundation on dynamic behaviour of the double walled cylindrical inhomogeneous micro shell using MCST and with the aid of GDQM", J. Solid Mech., 11(2), 440-453. https://doi.org/10.22034/JSM.2019.665264.
  96. Moradi, Z., Davoudi, M., Ebrahimi, F. and Ehyaei, A.F. (2021), "Intelligent wave dispersion control of an inhomogeneous micro-shell using a proportional-derivative smart controller", Wave Random Complex Med., 1-24. https://doi.org/10.1080/17455030.2021.1926572.
  97. Nair, P., Chong, B.W., Indahlastari, A., Ryan, J., Workman, C., Haithem Babiker, M., Yadollahi Farsani, H., Baccin, C.E. and Frakes, D. (2016), "Hemodynamic characterization of geometric cerebral aneurysm templates treated with embolic coils", J. Biomech. Eng., 138(2). https://doi.org/10.1115/1.4032046.
  98. Nieuwkamp, D.J., Setz, L.E., Algra, A., Linn, F.H.H., de Rooij, N.K. and Rinkel, G.J.E. (2009), "Changes in case fatality of aneurysmal subarachnoid haemorrhage over time, according to age, sex, and region: A meta-analysis", Lancet Neurol., 8(7), 635-642. https://doi.org/10.1016/S1474-4422(09)70126-7.
  99. Park, J.S. and Kim, J.H. (2006), "Thermal postbuckling and vibration analyses of functionally graded plates", J. Sound Vib., 289(1), 77-93. https://doi.org/10.1016/j.jsv.2005.01.031.
  100. Pourjabari, A., Hajilak, Z.E., Mohammadi, A., Habibi, M. and Safarpour, H. (2019), "Effect of porosity on free and forced vibration characteristics of the GPL reinforcement composite nanostructures", Comput. Math. Appl., 77(10), 2608-2626. https://doi.org/10.1016/j.camwa.2018.12.041.
  101. Raghavan, M.L., Ma, B. and Harbaugh, R.E. (2005), "Quantified aneurysm shape and rupture risk", J. Neurosurg., 102(2), 355-362. https://doi.org/10.3171/jns.2005.102.2.0355.
  102. Sadasivan, C., Fiorella, D.J., Woo, H.H. and Lieber, B.B. (2013), "Physical factors effecting cerebral aneurysm pathophysiology", Ann. Biomed. Eng., 41(7), 1347-1365. https://doi.org/10.1007/s10439-013-0800-z.
  103. Safarpour, H., Ghanizadeh, S.A. and Habibi, M. (2018), "Wave propagation characteristics of a cylindrical laminated composite nanoshell in thermal environment based on the nonlocal strain gradient theory", Eur. Phys. J. Plus, 133(12), 532. https://doi.org/10.1140/epjp/i2018-12385-2.
  104. Safarpour, H., Hajilak, Z.E. and Habibi, M. (2019a), "A sizedependent exact theory for thermal buckling, free and forced vibration analysis of temperature dependent FG multilayer GPLRC composite nanostructures restring on elastic foundation", Int. J. Mech. Mater. Des., 15(3), 569-583. https://doi.org/10.1007/s10999-018-9431-8.
  105. Safarpour, H., Pourghader, J. and Habibi, M. (2019b), "Influence of spring-mass systems on frequency behavior and critical voltage of a high-speed rotating cantilever cylindrical threedimensional shell coupled with piezoelectric actuator", J. Vib. Control, 25(9), 1543-1557. https://doi.org/10.1177/1077546319828465.
  106. Safarpour, M., Ebrahimi, F., Habibi, M. and Safarpour, H. (2020), "On the nonlinear dynamics of a multi-scale hybrid nanocomposite disk", Eng. Comput., 1-20. https://doi.org/10.1007/s00366-020-00949-5.
  107. Shafiei, N., Ghadiri, M. and Mahinzare, M. (2019), "Flapwise bending vibration analysis of rotary tapered functionally graded nanobeam in thermal environment", Mech. Adv. Mater. Struct., 26(2), 139-155. https://doi.org/10.1080/15376494.2017.1365982.
  108. Shafiei, N., Ghadiri, M., Makvandi, H. and Hosseini, S.A. (2017a), "Vibration analysis of Nano-Rotor's Blade applying Eringen nonlocal elasticity and generalized differential quadrature method", Appl. Math. Modell., 43, 191-206. https://doi.org/10.1016/j.apm.2016.10.061.
  109. Shafiei, N., Hamisi, M. and Ghadiri, M. (2020), "Vibration analysis of rotary tapered axially functionally graded Timoshenko nanobeam in thermal environment", J. Solid Mech., 12(1), 16-32.
  110. Shafiei, N. and Kazemi, M. (2017a), "Buckling analysis on the bidimensional functionally graded porous tapered nano-/microscale beams", Aerosp. Sci. Technol., 66, 1-11. https://doi.org/10.1016/j.ast.2017.02.019.
  111. Shafiei, N. and Kazemi, M. (2017b), "Nonlinear buckling of functionally graded nano-/micro-scaled porous beams", Compos. Struct., 178 483-492. https://doi.org/10.1016/j.compstruct.2017.07.045.
  112. Shafiei, N., Kazemi, M. and Fatahi, L. (2017b), "Transverse vibration of rotary tapered microbeam based on modified couple stress theory and generalized differential quadrature element method", Mech. Adv. Mater. Struct., 24(3), 240-252. https://doi.org/10.1080/15376494.2015.1128025.
  113. Shafiei, N., Kazemi, M. and Ghadiri, M. (2016a), "Comparison of modeling of the rotating tapered axially functionally graded Timoshenko and Euler-Bernoulli microbeams", Physica E, 83, 74-87. https://doi.org/10.1016/j.physe.2016.04.011.
  114. Shafiei, N., Kazemi, M. and Ghadiri, M. (2016b), "Nonlinear vibration behavior of a rotating nanobeam under thermal stress using Eringen's nonlocal elasticity and DQM", Appl. Phys. A, 122(8), 728. https://doi.org/10.1007/s00339-016-0245-y.
  115. Shafiei, N., Kazemi, M. and Ghadiri, M. (2016c), "Nonlinear vibration of axially functionally graded tapered microbeams", Int. J. Eng. Sci., 102, 12-26. https://doi.org/10.1016/j.ijengsci.2016.02.007.
  116. Shafiei, N., Kazemi, M. and Ghadiri, M. (2016d), "On sizedependent vibration of rotary axially functionally graded microbeam", Int. J. Eng. Sci., 101, 29-44. https://doi.org/10.1016/j.ijengsci.2015.12.008.
  117. Shafiei, N., Kazemi, M., Safi, M. and Ghadiri, M. (2016e), "Nonlinear vibration of axially functionally graded non-uniform nanobeams", Int. J. Eng. Sci., 106, 77-94. https://doi.org/10.1016/j.ijengsci.2016.05.009.
  118. Shafiei, N., Mirjavadi, S.S., Afshari, B.M., Rabby, S. and Hamouda, A.M.S. (2017c), "Nonlinear thermal buckling of axially functionally graded micro and nanobeams", Compos. Struct., 168, 428-439. https://doi.org/10.1016/j.compstruct.2017.02.048.
  119. Shafiei, N., Mirjavadi, S.S., MohaselAfshari, B., Rabby, S. and Kazemi, M. (2017d), "Vibration of two-dimensional imperfect functionally graded (2D-FG) porous nano-/micro-beams", Comput. Meth. Appl. Mech. Eng., 322, 615-632. https://doi.org/10.1016/j.cma.2017.05.007.
  120. Shafiei, N., Mousavi, A. and Ghadiri, M. (2016f), "On sizedependent nonlinear vibration of porous and imperfect functionally graded tapered microbeams", Int. J. Eng. Sci., 106, 42-56. https://doi.org/10.1016/j.ijengsci.2016.05.007.
  121. Shafiei, N., Mousavi, A. and Ghadiri, M. (2016g), "Vibration behavior of a rotating non-uniform FG microbeam based on the modified couple stress theory and GDQEM", Compos. Struct., 149, 157-169. https://doi.org/10.1016/j.compstruct.2016.04.024.
  122. Shafiei, N. and She, G.-L. (2018), "On vibration of functionally graded nano-tubes in the thermal environment", Int. J. Eng. Sci., 133 84-98. https://doi.org/10.1016/j.ijengsci.2018.08.004.
  123. Shan, X. and Huang, A. (2022), "Intelligent simulation of the thermal buckling characteristics of a tapered functionally graded porosity-dependent rectangular small-scale beam", Adv. Nano Res., 12(3), 281-290. https://doi.org/10.12989/anr.2022.12.3.281.
  124. Shao, Y., Zhao, Y., Gao, J. and Habibi, M. (2021), "Energy absorption of the strengthened viscoelastic multi-curved composite panel under friction force", Arch. Civil Mech. Eng., 21(4), 1-29. https://doi.org/10.1007/s43452-021-00279-3.
  125. Shariati, A., Habibi, M., Tounsi, A., Safarpour, H. and Safa, M. (2020), "Application of exact continuum size-dependent theory for stability and frequency analysis of a curved cantilevered microtubule by considering viscoelastic properties", Eng. Comput., 1-20. https://doi.org/10.1007/s00366-020-01024-9.
  126. Shivanian, E., Ghadiri, M. and Shafiei, N. (2017), "Influence of size effect on flapwise vibration behavior of rotary microbeam and its analysis through spectral meshless radial point interpolation", Appl. Phys. A, 123(5), 329. https://doi.org/10.1007/s00339-017-0955-9.
  127. Shojima, M., Oshima, M., Takagi, K., Torii, R., Hayakawa, M., Katada, K., Morita, A. and Kirino, T. (2004), "Magnitude and role of wall shear stress on cerebral aneurysm", Stroke, 35(11), 2500-2505. https://doi.org/10.1161/01.STR.0000144648.89172.0f.
  128. Shokrgozar, A., Safarpour, H. and Habibi, M. (2020), "Influence of system parameters on buckling and frequency analysis of a spinning cantilever cylindrical 3D shell coupled with piezoelectric actuator", Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science. 234(2), 512-529. https://doi.org/10.1177/0954406219883312.
  129. Sun, Y., Li, S.-R. and Batra, R.C. (2016), "Thermal buckling and post-buckling of FGM Timoshenko beams on nonlinear elastic foundation", J. Therm. Stresses, 39(1), 11-26. https://doi.org/10.1080/01495739.2015.1120627.
  130. Tang, Y., Liu, S., Deng, Y., Zhang, Y., Yin, L. and Zheng, W. (2021), "An improved method for soft tissue modeling", Biomed. Signal Pr. Control, 65, 102367. https://doi.org/10.1016/j.bspc.2020.102367.
  131. Tominari, S., Morita, A., Ishibashi, T., Yamazaki, T., Takao, H., Murayama, Y., Sonobe, M., Yonekura, M., Saito, N., Shiokawa, Y., Date, I., Tominaga, T., Nozaki, K., Houkin, K., Miyamoto, S., Kirino, T., Hashi, K. and Nakayama, T. (2015), "Prediction model for 3-year rupture risk of unruptured cerebral aneurysms in Japanese patients", Ann. Neurol., 77, 1050-1059. https://doi.org/10.1002/ana.24400.
  132. Valen-Sendstad, K., Mardal, K.-A. and Steinman, D.A. (2013), "High-resolution CFD detects high-frequency velocity fluctuations in bifurcation, but not sidewall, aneurysms", J. Biomech., 46(2), 402-407. https://doi.org/10.1016/j.jbiomech.2012.10.042.
  133. Valencia, A., Burdiles, P., Ignat, M., Mura, J., Bravo, E., Rivera, R. and Sordo, J. (2013), "Fluid structural analysis of human cerebral aneurysm using their own wall mechanical properties", Comput. Math. Meth. Med., 2013, 293128. https://doi.org/10.1155/2013/293128.
  134. Vlak, M.H.M., Algra, A., Brandenburg, R. and Rinkel, G.J.E. (2011), "Prevalence of unruptured intracranial aneurysms, with emphasis on sex, age, comorbidity, country, and time period: A systematic review and meta-analysis", Lancet Neur., 10(7), 626-636. https://doi.org/10.1016/S1474-4422(11)70109-0.
  135. Wang, H., Zandi, Y., Gholizadeh, M. and Issakhov, A. (2021a), "Buckling of porosity-dependent bi-directional FG nanotube using numerical method", Adv. Nano Res., 10(5), 493-507. https://doi.org/10.12989/anr.2021.10.5.493.
  136. Wang, J.F., Cao, S.H. and Zhang, W. (2021b), "Thermal vibration and buckling analysis of functionally graded carbon nanotube reinforced composite quadrilateral plate", Eur. J. Mech. A Solids, 85, 104105. https://doi.org/10.1016/j.euromechsol.2020.104105.
  137. Wang, L., Ni, Q., Li, M. and Qian, Q. (2008), "The thermal effect on vibration and instability of carbon nanotubes conveying fluid", Physica E, 40(10), 3179-3182. https://doi.org/10.1016/j.physe.2008.05.009.
  138. Wang, Y., Zeng, R. and Safarpour, M. (2022), "Vibration analysis of FG-GPLRC annular plate in a thermal environment", Mech. Based Des. Struct., 50(1), 352-370. https://doi.org/10.1080/15397734.2020.1719508.
  139. Wang, Z., Yu, S., Xiao, Z. and Habibi, M. (2020), "Frequency and buckling responses of a high-speed rotating fiber metal laminated cantilevered microdisk", Mech. Adv. Mater. Struct., 1-14. https://doi.org/10.1080/15376494.2020.1824284.
  140. Wattanasakulpong, N., Gangadhara Prusty, B. and Kelly, D.W. (2011), "Thermal buckling and elastic vibration of third-order shear deformable functionally graded beams", Int. J. Mech. Sci., 53(9), 734-743. https://doi.org/10.1016/j.ijmecsci.2011.06.005.
  141. Weir, B. (2002), "Unruptured intracranial aneurysms: A review", J. Neurosurg., 96(1), 3-42. https://doi.org/10.3171/jns.2002.96.1.0003.
  142. Weir, B., Amidei, C., Kongable, G., Findlay, J.M., Kassell, N.F., Kelly, J., Dai, L. and Karrison, T.G. (2003), "The aspect ratio (dome/neck) of ruptured and unruptured aneurysms", J. Neurosurg., 99(3), 447-451. https://doi.org/10.3171/jns.2003.99.3.0447.
  143. Wermer, M.J.H., van der Schaaf, I.C., Algra, A. and Rinkel, G.J.E. (2007), "Risk of rupture of unruptured intracranial aneurysms in relation to patient and aneurysm characteristics", Stroke, 38(4), 1404-1410. https://doi.org/10.1161/01.STR.0000260955.51401.cd.
  144. Wiebers, D.O. (2003), "International Study of Unruptured Intracranial Aneurysms Investigators : Unruptured intracranial aneurysms : Natural history, clinical outcome, and risks of surgical and endovascular treatment", Lancet, 362, 103-110. https://doi.org/10.2335/scs.36.187.
  145. Wu, J. and Habibi, M. (2021), "Dynamic simulation of the ultrafast-rotating sandwich cantilever disk via finite element and semi-numerical methods", Eng. Comput., 1-17. https://doi.org/10.1007/s00366-021-01396-6.
  146. Xiang, J., Natarajan, S.K., Tremmel, M., Ma, D., Mocco, J., Hopkins, L.N., Siddiqui, A.H., Levy, E.I. and Meng, H. (2011), "Hemodynamic-morphologic discriminants for intracranial aneurysm rupture", Stroke, 42(1), 144-152. https://doi.org/10.1161/STROKEAHA.110.592923.
  147. Xu, W., Pan, G., Moradi, Z. and Shafiei, N. (2021), "Nonlinear forced vibration analysis of functionally graded non-uniform cylindrical microbeams applying the semi-analytical solution", Compos. Struct., 114395. https://doi.org/10.1016/j.compstruct.2021.114395.
  148. Yan, J., Yao, Y., Yan, S., Gao, R., Lu, W. and He, W. (2020), "Chiral protein supraparticles for tumor suppression and synergistic immunotherapy: An enabling strategy for bioactive supramolecular chirality construction", Nano Lett., 20(8), 5844-5852. https://doi.org/10.1021/acs.nanolett.0c01757.
  149. Yang, F., Chong, A.C.M., Lam, D.C.C. and Tong, P. (2002), "Couple stress based strain gradient theory for elasticity", Int. J. Solid. Struct., 39(10), 2731-2743. https://doi.org/10.1016/S0020-7683(02)00152-X.
  150. Yu, X., Maalla, A. and Moradi, Z. (2022), "Electroelastic highorder computational continuum strategy for critical voltage and frequency of piezoelectric NEMS via modified multi-physical couple stress theory", Mech. Syst. Signal Pr., 165, 108373. https://doi.org/10.1016/j.ymssp.2021.108373.
  151. Zare, R., Najaafi, N., Habibi, M., Ebrahimi, F. and Safarpour, H. (2020), "Influence of imperfection on the smart control frequency characteristics of a cylindrical sensor-actuator GPLRC cylindrical shell using a proportional-derivative smart controller", Smart Struct. Syst., 26(4), 469-480. https://doi.org/10.12989/sss.2020.26.4.469.
  152. Zhang, X., Shamsodin, M., Wang, H., NoormohammadiArani, O., Khan, A.M., Habibi, M. and Al-Furjan, M. (2020), "Dynamic information of the time-dependent tobullian biomolecular structure using a high-accuracy size-dependent theory", J. Biomol. Struct. Dyn, 1-16. https://doi.org/10.1080/07391102.2020.1760939.
  153. Zhang, Y., Wang, Z., Tazeddinova, D., Ebrahimi, F., Habibi, M. and Safarpour, H. (2021), "Enhancing active vibration control performances in a smart rotary sandwich thick nanostructure conveying viscous fluid flow by a PD controller", Wave Random Complex Med., 1-24. https://doi.org/10.1080/17455030.2021.1948627.
  154. Zhang, T., Wang, Z., Liang, H., Wu, Z., Li, J., Ou-Yang, J., Yang, X., Peng, Y.B. and Zhu, B. (2022a), "Transcranial focused ultrasound stimulation of periaqueductal gray for analgesia", IEEE T. Biomed. Eng., 1-1. https://doi.org/10.1109/TBME.2022.3162073.
  155. Zhang, Z., Wang, L., Zheng, W., Yin, L., Hu, R. and Yang, B. (2022b), "Endoscope image mosaic based on pyramid ORB", Biomed. Signal Pr. Control, 71, 103261. https://doi.org/10.1016/j.bspc.2021.103261.
  156. Zhang, T., Liang, H., Wang, Z., Qiu, C., Peng Yuan, B., Zhu, X., Li, J., Ge, X., Xu, J., Huang, X., Tong, J., Ou-Yang, J., Yang, X., Li, F. and Zhu, B. (2022c), "Piezoelectric ultrasound energy-harvesting device for deep brain stimulation and analgesia applications", Sci. Adv., 8(15), eabk0159. https://doi.org/10.1126/sciadv.abk0159.
  157. Zhao, J. and Yu, Z. (2021), "On the modeling and simulation of the nonlinear dynamic response of NEMS via a couple of nonlocal strain gradient theory and classical beam theory", Adv. Nano Res., 11(5), 547-563. https://doi.org/10.12989/anr.2021.11.5.547.
  158. Zhao, Y., Moradi, Z., Davoudi, M. and Zhuang, J. (2021), "Bending and stress responses of the hybrid axisymmetric system via state-space method and 3D-elasticity theory", Eng. Comput., 1-23. https://doi.org/10.1007/s00366-020-01242-1.
  159. Zhong, Y. and Liang, X. (2022), "Using CNN-VGG 16 to detect the tennis motion tracking by information entropy and unascertained measurement theory", Adv. Nano Res., 12(2), 223-229. https://doi.org/10.12989/anr.2022.12.2.223.
  160. Zhou, C., Zhao, Y., Zhang, J., Fang, Y. and Habibi, M. (2020), "Vibrational characteristics of multi-phase nanocomposite reinforced circular/annular system", Adv. Nano Res., 9(4), 295-307. https://doi.org/10.12989/anr.2020.9.4.295.