DOI QR코드

DOI QR Code

Mechanics model of novel compound metal damper based on Bi-objective shape optimization

  • He, Haoxiang (Beijing Key Lab of Earthquake Engineering and Structural Retrofit, Beijing University of Technology) ;
  • Ding, Jiawei (Beijing Key Lab of Earthquake Engineering and Structural Retrofit, Beijing University of Technology) ;
  • Huang, Lei (Beijing Key Lab of Earthquake Engineering and Structural Retrofit, Beijing University of Technology)
  • 투고 : 2019.05.27
  • 심사 : 2022.10.24
  • 발행 : 2022.10.25

초록

Traditional metal dampers have disadvantages such as a higher yield point and inadequate adjustability. The experimental results show that the low yield point steel has superior energy dissipation hysteretic capacity and can be applied to seismic structures. To overcome these deficiencies, a novel compound metal damper comprising both low yield point steel plates and common steel plates is presented. The optimization objectives, including "maximum rigidity" and "full stress state", are proposed to obtain the optimal edge shape of a compound metal damper. The numerical results show that the optimized composite metal damper has the advantages such as full hysteresis curve, uniform stress distribution, more sufficient energy consumption, and it can adjust the yield strength of the damper according to the engineering requirements. In view of the mechanical characteristics of the compound metal damper, the equivalent model of eccentric cross bracing is established, and the approximate analytical solution of the yield strength and the yield displacement is proposed. A nonlinear simulation analysis is carried out for the overall aseismic capacity of three-layer-frame structures with a compound metal damper. It is verified that a compound metal damper has better energy dissipation capacity and superior seismic performance, especially for a damper with double-objective optimized shape.

키워드

과제정보

This work is partially supported by Natural Science Foundation of China under Grant nos. 51878017, and National Key R&D Program of China under Grant nos. 2017YFC1500604.

참고문헌

  1. Aguirre, M. and Roberto Sanchez, A. (1992), "Structural seismic damper", J. Struct. Eng., 118(5), 1158-1171. https://doi.org/10.1061/(ASCE)0733-9445(1992)118:5(1158)
  2. Deng, K., Pan, P., Sun, J., Liu, J. and Xue, Y. (2014), "Shape optimization design of steel shear panel dampers", J. Constr. Steel Res., 99(4), 187-193. https://doi.org/10.1016/j.jcsr.2014.03.001.
  3. Di Lauro, F., Montuori, R., Nastri, E. and Piluso, V. (2019), "Partial safety factors and overstrength coefficient evaluation for the design of connections equipped with friction dampers", Eng. Struct., 178, 645-655. https://doi.org/10.1016/j.engstruct.2018.10.052.
  4. Huang, X. and Xie, Y.M. (2008), "A new look at ESO and BESO optimization methods", Struct. Multidisc. Optim., 35(1), 89-92. https://doi.org/10.1007/s00158-007-0140-4.
  5. Jia, J., Song, N., Xu, Z., Han, Q. and Zhang, Q. (2015), "Hysteretic behavior simulation of novel rhombic mild steel dampers", J. Vibroeng., 17(6), 3122-3132.
  6. Jung, W.Y. and Ju, B.S. (2015), "Effect of MDOF structes'optimal dampers on seismic fragility of piping", Earthq. Struct., 9(3), 563-576. https://doi.org/10.12989/eas.2015.9.3.563.
  7. Kelly, J.M., Skinner, R.I. and Heine, A.J. (1972), "Mechanisms of energy absorption in special devices for use in earthquake-resistant structures", Bull. N.Z. Soc. Earthq. Eng., 5(3), 63-88. https://doi.org/10.5459/bnzsee.5.3.63-88.
  8. Lee, J. and Kim, J. (2015), "Seismic performance evaluation of moment frames with slit-friction hybrid dampers", Earthq. Struct., 9(6), 1133-1152. http://doi.org/10.12989/eas.2015.9.6.1291.
  9. Li, C. and Cao, L. (2019), "High performance active tuned mass damper inerter for structures under the ground accelration", Earthq. Struct., 16(2), 149-163. https://doi.org/10.12989/eas.2019.16.2.149.
  10. Liu, Q.M. (2007), "A design method of rib distribution for thin plate structure based on the full stress rule", Mach. Des. Manuf., 1(1), 23-24.
  11. Liu, Y. and Shimoda, M. (2013), "Shape optimization of shear panel damper for improving the deformation ability under cyclic loading", Struct. Multidisc. Optim., 48(2), 427-435. https://doi.org/10.1007/s00158-013-0909-6.
  12. Pan, P., Ohsaki, M. and Tagawa, H. (2015), "Shape optimization of H-beam flange for maximum plastic energy dissipation", J. Struct. Eng., 133(8), 1176-1179. https://doi.org/10.1061/(ASCE)0733-9445(2007)133:8(1176).
  13. Peizhen, L.I. and Hao, L.I. (2016), "Analysis of SSI effect on damping effect of mild steel damper", 2016 International Conference on Architectural Engineering and Civil Engineering, December.
  14. Samani, H.R., Mirtaheri, M. and Zandi, A.P. (2017). "The study of frictional damper with various control algorithms", Earthq. Struct., 12(5), 479-487. https://doi.org/10.12989/eas.2017.12.5.479.
  15. Shu, G. and Li, Z. (2017), "Parametric identification of the Bouc-Wen model by a modified genetic algorithm: Application to evaluation of metallic dampers", Earthq. Struct., 13(4), 394-407. https://doi.org/10.12989/eas.2017.13.4.397.
  16. Teruna, D.R., Majid, T.A. and Budiono, B. (2015), "Experimental study of hysteretic steel damper for energy dissipation capacity", Adv. Civil Eng., 7(3), 254-258. https://doi.org/10.1155/2015/631726.
  17. Tirca, L.D., Foti, D. and Diaferio, M.(2003), "Response of middle rise steel frames with and without passive dampers to near field ground motions", Eng. Struct., 25(2), 169-179. https://doi.org/10.1016/S0141-0296(02)00132-3.
  18. Tsaik, K.C., Chen, H.W., Hong, C.P. and Su, Y.F. (1993), "Design of steel triangular plate energy absorbers for seismic resistant construction", Earthq. Spectra, 9(3), 505-528. https://doi.org/10.1193/1.1585727.
  19. Wei, B., Wang, P., He, X., Zhang, Z. and Chen, L. (2017), "Effects of friction variability on a rolling-damper-spring isolation system", Earthq. Struct., 13(6), 551-559. https://doi.org/10.12989/eas.2017.13.6.551.
  20. Whittaker, A.S., Bertero, V.V. and Thompson, C.I. (1991), "Sesismic testing of steel plate energy dissipation devices", Earthq. Spectra, 7(4), 563-604. https://doi.org/10.1193/1.1585644.
  21. Xie, C. (2020), "Mechanical property study of metal shear damper with welding hole", Build. Struct., 50(S2), 322-329.
  22. Xing, S.T. (2003), "Study on mechanical behavior and effectiveness of a new type of mild steel damper", Earthq. Eng. Eng. Vib., 23(6), 179-186.
  23. Xue, J., Wu, C., Zhang, X. and Qi, Z. (2021), "Experimental and numerical study of mortise-tenon joints reinforced with innovative friction damper", Eng. Struct., 230, 111701. https://doi.org/10.1016/j.engstruct.2020.111701.
  24. Yanhong, X., Aiqun, L. and Zhen, H. (2011), "Experimental study of mild steel dampers with parabolic shape", J. Build. Struct., 32(12), 202-209.
  25. Zhang, W., Zhang, M. and Li, D. (2008), "An experimental research on performance and application of a new type of mild steel damper added damping and stiffness (ADAS)", J. Harbin Inst. Technol., 40(12), 1888-1894.
  26. Zhou, Y. and Liu, J. (1998), "Development and study of new energy dissipaters (dampers)", Earthq. Eng. Eng. Vib., 18(1), 71-79.