한국구조물진단유지관리공학회 논문집 (Journal of the Korea institute for structural maintenance and inspection)

  • 제26권4호
  • /
  • Pages.11-19
  • /
  • 2022
  • /
  • 2234-6937(pISSN)
  • /
  • 2287-6979(eISSN)
한국구조물진단유지관리공학회 (Korea Institute for Structural Maintenance Inspection)
권호 표지
DOI QR코드

DOI QR Code

조임쇠 경사길이에 따른 체결식 커플러의 이음성능 평가

Splice Performance Evaluation of Fastening Coupler According to the Slope Length of Internal Fasteners

  • 정현석 (한양대학교 대학원 건축공학과) ;
  • 최창식 (한양대학교 건축공학부)
  • 투고 : 2022.04.28
  • 심사 : 2022.06.24
  • 발행 : 2022.08.30
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

본 연구에서는 기계식 커플러의 이음성능을 향상시키기 위해 다른 접합방식을 가진 두 가지의 새로운 커플러를 개발하였다. 두 가지 방식의 기계식 이음장치에 대하여 응력 해석을 수행하였다. 커플러의 재료특성, 접합방식, 내부 조임쇠의 경사길이를 변수로 최대 인장강도의 영향성을 분석하기 위해 일축인장시험을 수행하였다. 일축인장시험결과를 만족하는 시험체를 대상으로 KS D 0249에 의거하여 정적내력시험 및 반복하중 시험을 수행하였다. 이에 대한 연구결과는 다음과 같다. (1) 커플러의 인장강도와 내부 조임쇠의 경사길이는 최대 인장강도에 영향을 끼친다. (2) 연결 방식에 따라 접합된 철근의 강성, 슬립량, 강성감소율에 영향이 있다. 연구결과는 새롭게 제안된 향상된 기계식 이음장치의 현장 적용에 대한 가능성을 검증하였다.

In this study, in order to improve the splice performance of mechanical couplers, two new mechanical couplers with different connection modes were developed with rebar(SD400). The stress analysis of mechanical couplers with two different connection modes was carried out. Uniaxial tensile tests were carried out with type of steel, connection mode and the slope length of internal fastener as variables to analyze the influence on the maximum tensile strength. Building upon this previous work, the specimens that met the code in uniaxial tensile test were fabricated and static loading test and cyclic loading test were performed on the basis of Korean code(KS D 0249). The results of this research are as follows; (1) The tensile strength of steel and the slope length of internal fasteners have a certain influence on the maximum tensile strength. (2) The connection mode has some influence on the stiffness, slip and stiffness reduction rate of the connecting rebars. The results verify the feasibility of the proposed enhanced mechanical coupler in the field.

키워드

과제정보

이 연구는 2021년도 정부 (과학기술정보통신부) 연구비 지원에 의한 결과의 일부임 (과제번호 : NRF-2020R1A4A1019074)

참고문헌

  1. Korea Design Standard (2021). "Concrete seismic design standards", Korea construction standards center, KDS 14 20 80
  2. Park, S. K., Lee, K., & Ko, W. J. (2000). An experimental research on the flexural behavior of concrete beam with lock joint coupler bars, Journal of Korea Institute for Structural Maintenance and Inspection, 4(3), 197-204.
  3. Lee, S. S., & Chun, H. M. (2018). Development of filler type mechanical splice for high strength re-bar. Journal of the Korea Academia-Industrial cooperation Society, 19(12), 686-693. https://doi.org/10.5762/KAIS.2018.19.12.686
  4. Sim, J. S., Park, C. W., Kang, T. S., & Kim, T. S. (2008). An experimental study of tension properties on new developed up set coupler, Journal of Korea Institute for Structural Maintenance and Inspection, 12(5), 109-115.
  5. Kim, H. K. (2002). Experimental study on tensile strength and ductility of high strength grout-filled splice sleeve, Architectural institute of Korea, 18(2), 35-42.
  6. Kim, H. K. (2001). Structural performance of high strength grout-filled splice sleeve system, Journal of the Korea Concrete Institute, 13(5), 516-524. https://doi.org/10.22636/JKCI.2001.13.5.516
  7. Kim, H. K. (1998). Performance of grout-filled splice sleeve system under cyclic loading, Journal-Architectural institute of Korea Structure and Construction, 14(9), 73-81.
  8. Ling, J. H., Rahman, A. B. A., & Ibrahim, I. S. (2014). Feasibility study of grouted splice connector under tensile load, Construction and Building Materials, 50, 530-539. https://doi.org/10.1016/j.conbuildmat.2013.10.010
  9. Choi, H. B., Kim, G. H., Kim, J. Y., Seo, D. S. & Kang, K. I. (2003). A study on development of tempcore re-bar mechanical connection by making screw on node and rib, Journal of the Architectural Institute of Korea, 19(3), 99-106.
  10. Kim, E. H. (2008). An Experimental Study of the Beam Members to Develop the Fr iction Type Coupler for Big Size Steel bars, Seoul, Hanyang University.
  11. Bae, S. H. (2015). Evaluation on the Limit State Strain and Necking Region of the Rebar with Mechanical Splice, Busan, Busan National University.
  12. Kim, D. J., Lee. J. M., Lee, J. S., & Lee, J. W. (2016). Construct-ability of preformed bar arrangement with threaded reinforcing bars and connectors, Magazine of the Korea Concrete Institute, 28(5), 43-47.
  13. Lee, S. S. & Chun, H. M. (2018). Development of Filler Type Mechanical Splice for High Strength Re-bar, Journal of the Korea Academia-Industrial Cooperation Society, (19)12, 686-693. https://doi.org/10.5762/KAIS.2018.19.12.686
  14. Kim, J. M., Choi, S. W. & Kim, B. M. (2019). Mechanical Splicing Characteristic of the Threaded Bar according to the Contact Conditions of the Transverse Rib, Transactions of Materials Processing, 28(3), 145-153. https://doi.org/10.5228/KSTP.2019.28.3.145
  15. Kwon, K. J., Park, D. S., & Joung, W. S. (2011). Experimental evaluation on structural performance of large diameter reinforcing steel bars with spliced sleeves, Journal of Korea Institute for Structural Maintenance and Inspection, (15)1, 180-188. https://doi.org/10.11112/jksmi.2011.15.1.180
  16. Liu, X., Cui, T., Wu, M., & Li, J. (2011). Test on seismic behavior of pre-cast shear walls with vertical reinforcements spliced by grout sleeves, Journal of Inner Mongolia University of Science and Technology, 35(2), 195-200.
  17. American Concrete Institute. (2019). Building Code Requirement for Structural Concrete and Commentary. ACI 318-19. (in America)
  18. American Concrete Institute. (2013). Code Requirements for Nuclear Safety-Related Concrete Structures and Commentary. ACI 349-13. (in America)
  19. Canadian Standards Association. (2004). Design of Concrete Structures. CSA-A23.3-04.(in Canada)
  20. Korean Agency for Technology and Standards. (2007). Test Pieces for Tensile Test for Metallic Materials, Korean Standards Association. KS D 0801. (in Korea)
  21. Korean Agency for Technology and Standards. (2019). Method of Inspection for Mechanical Splicing Joint of Bars for Concrete Reinforcement, KS D 0249.(in Korea)
  22. Yoojin Engineering. (2020) Development of YG-Smart coupler, Seoul, Ministry of SMEs and Startups.