한국결정성장학회지 (Journal of the Korean Crystal Growth and Crystal Technology)

  • 제32권5호
  • /
  • Pages.175-182
  • /
  • 2022
  • /
  • 1225-1429(pISSN)
  • /
  • 2234-5078(eISSN)
한국결정성장학회 (The Korea Association of Crystal Growth)
권호 표지
DOI QR코드

DOI QR Code

Dy 및 Mg가 첨가된 BaTiO3에서 소결 온도가 미세구조와 유전특성에 미치는 영향

Effect of sintering temperature on microstructure and dielectric properties in (Dy, Mg)-doped BaTiO3

  • 우종원 (창원대학교 신소재공학부) ;
  • 김성현 (창원대학교 신소재공학부) ;
  • 최문희 (한국세라믹기술원 전자융합본부 나노소재.공정센터) ;
  • 전상채 (창원대학교 신소재공학부)
  • Woo, Jong-Won (School of Materials Science and Engineering, Changwon National University) ;
  • Kim, Sung-Hyun (School of Materials Science and Engineering, Changwon National University) ;
  • Choi, Moon-Hee (Nanomaterials and Nanotechnology Center, Korea Institute of Ceramic Engineering & Technology) ;
  • Jeon, Sang-Chae (School of Materials Science and Engineering, Changwon National University)
  • 투고 : 2022.08.25
  • 심사 : 2022.09.14
  • 발행 : 2022.10.31
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

MLCC(Multi-Layer Ceramic Capacitor)의 유전체 층에 사용되는 BaTiO3는 유전 특성의 온도안정성을 향상시키기 위해 첨가제로서 희토류 및 Mg를 사용한다. 이러한 첨가제는 소결 중 입자성장 및 치밀화 거동, 결국 유전 특성에 지대한 영향을 주게 되므로 조성에 따른 미세구조 발현 양상을 살펴보는 것이 중요하다. 본 연구는 95BaTiO3-1Dy2O3-2MgO-2SiO2(mol%)의 조성에서 온도 변화에 따른 결정구조, 입자성장 및 밀도 변화를 관찰하고 이러한 변화가 유전 상수에 미치는 영향을 관찰하였다. 1200~1300℃의 온도범위에서 소결 온도가 증가함에 따라, 평균 입도는 눈에 띄게 커지는 반면 밀도의 변화는 미미하여 입자크기가 주요한 미세구조적 요소임을 밝혔다. 본 실험에서 관찰된 입자크기의 온도의존성은 기존 입자성장 이론에서 설명한 온도 변화에 따른 입자성장 거동의 변화양상과 잘 부합하였으며, 이러한 이해는 향후 희토류가 첨가된 BaTiO3에서 유전 특성 향상을 위한 소결 미세구조 제어에 유용하게 활용될 수 있을 것이다.

Rare-earth elements were doped with Mg to enhance the temperature stability of dielectric properties of BaTiO3 for its application to MLCC (Multi-Layer Ceramic Capacitor). The additives strongly affect both grain growth and densification behaviors during sintering, and hence dielectric properties. The additive effects therefore should be examined in each system with different additives. This study investigated the crystal structure, grain growth and densification behaviors and related variations in dielectric constant with respect to sintering temperature. Dielectric constant appears to be varied with grain size in a temperature range between 1200 and 1300℃, suggesting the importance of grain size control. The temperature dependence of grain size variation was well explained by an established theory correlating the grain growth behavior with grain boundary structure. This accordance provides a basis for sintering technique to control grain growth thus to improve dielectric constant in rare-earth doped BaTiO3.

키워드

과제정보

이 논문은 2021~2022년도 창원대학교 자율연구과제 연구비 지원으로 수행된 연구결과임

참고문헌

  1. T. Nagai and K. Iijima, "Effect of MgO Doping on the phase transformations of BaTiO3", J. Am. Ceram. Soc. 83[1] (2000) 107. https://doi.org/10.1111/j.1151-2916.2000.tb01156.x
  2. C. Randall, R. Newnham and L. Cross, "History of the first ferroelectric oxide, BaTiO3", Materials Research Institute, The Pennsylvania State University, University Park, Pa, USA (2004) 1.
  3. T.M. Noh, J.S. Kim, J.S. Ryu and H.S. Lee, "Electrical properties and temperature stability of dysprosium and erbium co-doped Barium Titanate with perovskite structure for X7R MLCCs", J. Korean Ceram. Soc. 48[4] (2011) 323. https://doi.org/10.4191/KCERS.2011.48.4.323
  4. S.C. Jeon, "TCC behavior of a shell phase in core/shell structure formed in Y-doped BaTiO3: an individual observation", J. Korean Cryst. Growth Cryst. Technol. 30[3] (2020) 110. https://doi.org/10.6111/JKCGCT.2020.30.3.110
  5. H.K. Park, J.Y. Lee, S.W. Cho and J.S. Kim, "Overview on the Technologies for Extraction of Rare Earth Metals", J. Korean Inst. Resour. Recycl. 21[3] (2012) 74. https://doi.org/10.7844/KIRR.2012.21.3.074
  6. M. Kahn, "Effects of sintering and grain growth on the distribution of niobium addition in barium titanate ceramics", Ph.D. Thesis, Pennsylvania State University, University Park, PA (1969).
  7. B.S. Rawal, M. Kahn and W.R. Buessem, "Grain coregrain shell structure in barium titanate-based dielectrics" pp. 172-88 in Advances in Ceramics, Vol. 1, Grain Boundary Phenomena in Electronic Ceramics. Edited by L. M. Levinson. American Ceramic Society, Columbus, OH (1981).
  8. D. Hennings and G. Rosenstein, "Temperature-stable dielectrics based on chemically inhomogeneous BaTiO3", J. Am. Ceram. Soc. 67 (1984) 249. https://doi.org/10.1111/j.1151-2916.1984.tb18841.x
  9. H.Y. Lu, J.S. Bow and W.H. Deng, "Core-shell structures in ZrO2-modified BaTiO3 ceramic", J. Am. Ceram. Soc. 73[12] (1990) 3562. https://doi.org/10.1111/j.1151-2916.1990.tb04258.x
  10. H. Chazono and M. Fujimoto, "Sintering characteristics and formation mechanisms of 'Core-Shell' structure in BaTiO3-Nb2O5-Co3O5 ternary system", Jpn. J. Appl. Phys. 34 (1995) 5354. https://doi.org/10.1143/JJAP.34.5354
  11. S.C. Jeon, C.S. Lee and S.J.L. Kang, "The mechanism of core/shell structure formation during sintering of BaTiO3-based ceramics", J. Am. Ceram. Soc. 95 (2012) 2435. https://doi.org/10.1111/j.1551-2916.2012.05111.x
  12. F.D. Morrison, A.M. Coats, D.C. Sinclair and A.R. West, "Charge compensation mechanisms in La-doped BaTiO3", J. Electroceram. 6 (2001) 219. https://doi.org/10.1023/A:1011400630449
  13. F.D. Morrison, D.C. Sinclair and A.R. West, "An alternative explanation for the origin of the resistivity anomaly in La-doped BaTiO3", J. Am. Ceram. Soc. 84 (2001) 474. https://doi.org/10.1111/j.1151-2916.2001.tb00684.x
  14. J.I. Itoh, D.C. Park, N. Ohashi, I. Sakaguchi, I. Yashima, H. Haneda and J. Tanaka, "Oxygen defects related to electrical properties of La-doped BaTiO3", Jpn. J. Appl. Phys. 41 (2002) 3798. https://doi.org/10.1143/JJAP.41.3798
  15. V. Paunovic, L. Zivkovic and V. Mitic, "Influence of rare-earth additives (La, Sm and Dy) on the microstructure and dielectric properties of doped BaTiO3 ceramics", Sci. Sintering 42 (2010) 69. https://doi.org/10.2298/SOS1001069P
  16. K.J. Park, C.H. Kim, Y.T. Kim and K.H. Hur, "The doping effects of intermediate rare-earth ions (Dy, Y and Ho) on BaTiO3 ceramics", J. Korean Ceram. Soc. 46[2] (2009) 181. https://doi.org/10.4191/KCERS.2009.46.2.181
  17. S.C. Jeon, C.S. Lee, K.H. Kim and S.L. Kang, "Effect of core/shell volumetric ratio on dielectric-temperature behavior in (Mg, Y)-doped BaTiO3", J. Adv. Ceram. 3[1] (2014) 76. https://doi.org/10.1007/s40145-014-0096-y
  18. S.C. Jeon and S.J.L. Kang, "Oxidation-induced strain relaxation and related dielectric-temperature behavior in core/shell grained BaTiO3", J. Electroceram. 35 (2015) 129. https://doi.org/10.1007/s10832-015-0004-z
  19. S.C. Jeon and S.J.L. Kang, "Coherency strain enhanced dielectric-temperature property of rare-earth doped BaTiO3", Appl. Phys. Lett. 102 (2013) 112915. https://doi.org/10.1063/1.4798273
  20. C.H. Kim, K.J. Park, Y.J. Yoon, M.H. Hong, J.O. Hong and K.H. Hur, "Role of yttrium and magnesium in the formation of core-shell structure of BaTiO3 grains in MLCC", J. Eur. Ceram. Soc. 28 (2008) 1213. https://doi.org/10.1016/j.jeurceramsoc.2007.09.042
  21. C.S. Chen, C.C. Chou, W.C. Yang and I.N. Lin, "TEM microstructures of X7R type base-metal electrode BaTiO3 capacitor materials co-doped with MgO/Y2O3 additives", Ferroelectrics. 332 (2006) 41. https://doi.org/10.1080/00150190500323529
  22. S.C. Jeon, S.Y. Kim and K.S. Moon, "Interface structure dependent step free energy and grain growth behavior of core/shell grains in (Y, Mg)-doped BaTiO3 containing a liquid phase", J. Eur. Ceram. Soc. 42 (2022) 2804. https://doi.org/10.1016/j.jeurceramsoc.2022.01.045
  23. R.D. Shannon, "Revised effective ionic radii and systematic studies of interatomic distances in halides and chalcogenides", Acta Cryst. A32 (1976) 751. https://doi.org/10.1107/S0567739476001551
  24. S.D. Cho, J.Y. Lee and K.W. Paik, "Study on the effects of BaTiO3 particle size on dielectric constant and leakage current of epoxy/BaTiO3 composite films for embedded capacitors", J. Microelectron. Electron. Packag. 9[2] (2002) 11.
  25. P. Zheng, J.L. Zhang, Y.Q. Tan and C.L. Wang, "Grainsize effects on dielectric and piezoelectric properties of poled BaTiO3 ceramics", Acta Mater. 60 (2018) 5022. https://doi.org/10.1016/j.actamat.2012.06.015
  26. S.J.L. Kang, "Sintering: densification, grain growth and microstructure", Elsevier (2004).
  27. Y.I. Jung, S.J.L. Kang and D.Y. Yoon, "Coarsening of polyhedral grains in a liquid matrix", J. Mater. Res. 24 (2009) 2949. https://doi.org/10.1557/jmr.2009.0356
  28. Y.H. Heo, S.C. Jeon, J.G. Fisher, S.Y. Choi, K.H. Hur and S.J.L. Kang, "Effect of step free energy on delayed abnormal grain growth in a liquid phase-sintered BaTiO3 model system", J. Eur. Ceram. Soc. 31 (2011) 755. https://doi.org/10.1016/j.jeurceramsoc.2010.12.010
  29. K.S. Moon, D. Rout, H.Y. Lee and S.J.L. Kang, "Effect of TiO2 addition on grain shape and grain coarsening behavior in 95Na1/2Bi1/2TiO3-5BaTiO3", J. Eur. Ceram. Soc. 31 (2011) 1915. https://doi.org/10.1016/j.jeurceramsoc.2011.04.002
  30. S.M. An and S.J.L. Kang, "Boundary structural transition and grain growth behavior in BaTiO3 with Nd2O3 doping and oxygen partial pressure change", Acta Mater. 59 (2011) 1964. https://doi.org/10.1016/j.actamat.2010.11.062