Steel and Composite Structures

  • 제45권1호
  • /
  • Pages.133-145
  • /
  • 2022
  • /
  • 1229-9367(pISSN)
  • /
  • 1598-6233(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Experimental and analytical study on RC beam reinforced with SFCB of different fiber volume ratios under flexural loading

  • Lin, Jia-Xiang (School of Civil and Transportation Engineering, Guangdong University of Technology) ;
  • Cai, Yong-Jian (School of Civil and Transportation Engineering, Guangdong University of Technology) ;
  • Yang, Ze-Ming (School of Civil and Transportation Engineering, Guangdong University of Technology) ;
  • Xiao, Shu-Hua (School of Civil and Transportation Engineering, Guangdong University of Technology) ;
  • Chen, Zhan-Biao (School of Civil and Transportation Engineering, Guangdong University of Technology) ;
  • Li, Li-Juan (School of Civil and Transportation Engineering, Guangdong University of Technology) ;
  • Guo, Yong-Chang (School of Civil and Transportation Engineering, Guangdong University of Technology) ;
  • Wei, Fei-Fei (School of Civil and Transportation Engineering, Guangdong University of Technology)
  • 투고 : 2021.09.29
  • 심사 : 2022.10.12
  • 발행 : 2022.10.10
⟨ 이전 논문 다음 논문 ⟩

초록

Steel fiber composite bar (SFCB) is a novel type of reinforcement, which has good ductility and durability performance. Due to the unique pseudo strain hardening tensile behavior of SFCB, different flexural behavior is expected of SFCB reinforced concrete (SFCB-RC) beams from traditional steel bar reinforced concrete (S-RC) beams and FRP bar reinforced concrete (F-RC) beams. To investigate the flexural behavior of SFCB-RC beam, four points bending tests were carried out and different flexural behaviors between S/F/SFCB-RC beams were discussed. An flexural analytical model of SFCB-RC beams is proposed and proved by the current and existing experimental results. Based on the proposed model, the influence of the fiber volume ratio R of the SFCB on the flexural behavior of SFCB-RC beams is discussed. The results show that the proposed model is effective for all S/F/SFCB-RC flexural members. Fiber volume ratio R is a key parameter affecting the flexural behavior of SFCB-RC. By controlling the fiber volume ratio of SFCB reinforcements, the flexural behavior of the SFCB-RC flexural members such as bearing capacity, bending stiffness, ductility and repairability of SFCB-RC structures can be designed.

키워드

과제정보

This work is supported by the National Natural Science Foundation of China [grant numbers 12002090, 12032009]; and the GuangDong Basic and Applied Basic Research Foundation [grant number 2019A1515110808].

참고문헌

  1. ACI 440.1R (2015), Guide for the Design and Construction of Structural Concrete Reinforced with Fiber-Reinforced Polymer (FRP) Bars, American Concrete Institute; Farmington Hills, MI, USA.
  2. ACI 318 (2019), Building code requirements for structural concrete and commentary, American Concrete Institute; Farmington Hills, MI, USA.
  3. Ahmed, A., Guo, S., Zhang, Z., Shi, C. and Zhu, D. (2020), "A review on durability of fiber reinforced polymer (FRP) bars reinforced seawater sea sand concrete", Constr. Build. Mater., 256, 119484. https://doi.org/10.1016/j.conbuildmat.2020.119484.
  4. Behnam, B. and Eamon, C. (2013), "Reliability-based design optimization of concrete flexural members reinforced with ductile FRP bars", Constr. Build. Mater., 47, 942-950. https://doi.org/10.1016/j.conbuildmat.2013.05.101.
  5. Bencardino, F., Condello, A. and Ombres, L. (2016), "Numerical and analytical modeling of concrete beams with steel, FRP and hybrid FRP-steel reinforcements", Compos. Struct., 140, 53-65. https://doi.org/10.1016/j.compstruct.2015.12.045.
  6. Benmokrane, B., Ali, A.H., Mohamed, H.M., ElSafty, A. and Manalo, A. (2017), "Laboratory assessment and durability performance of vinyl-ester, polyester, and epoxy glass-FRP bars for concrete structures", Compos. Part B Eng., 114, 163-174. https://doi.org/10.1016/j.compositesb.2017.02.002.
  7. Chellapandian, M., Prakash, S.S. and Sharma, A. (2017), "Strength and ductility of innovative hybrid NSM reinforced and FRP confined short RC columns under axial compression", Compos. Struct., 176, 205-216. https://doi.org/10.1016/j.compstruct.2017.05.033.
  8. Dong, Z., Wu, G. and Xu, Y. (2017), "Bond and flexural behavior of sea sand concrete members reinforced with hybrid steelcomposite bars presubjected to wet-dry cycles", J. Compos. Constr., 21, 040160952. https://doi.org/10.1061/(ASCE)CC.1943-5614.0000749.
  9. Dong, Z., Wu, G., Zhao, X., Zhu, H. and Lian, J. (2018a), "Bond durability of steel-FRP composite bars embedded in seawatersea-sand concrete under constant bending and shearing stress", Constr. Build. Mater., 192, 808-817. https://doi.org/10.1016/j.conbuildmat.2018.10.154.
  10. Dong, Z., Wu, G., Zhao, X., Zhu, H. and Lian, J. (2018b), "Durability test on the flexural performance of seawater seasandconcrete beams completely reinforced with FRP bars", Constrbuild. Mater., 192, 671-682. https://doi.org/10.1016/j.conbuildmat.2018.10.166.
  11. Fakharifar, M., Dalvand, A., Sharbatdar, M.K., Chen, G. andSneed, L. (2016), "Innovative hybrid reinforcement constituting conventional longitudinal steel and FRP stirrups for improved seismic strength and ductility of RC structures", Front Struct Civ Eng., 10(1), 44-62. https://doi.org/10.1007/s11709-015-0295-9.
  12. GB/T 50081 (2002), Standard for test method of mechanical properties on ordinary concrete, China Architecture and Building Press; Beijing, China.
  13. GB 50010 (2010), Code for design of concrete structures, China Architecture and Building Press; Beijing, China.
  14. GB/T 26743 (2011), Fiber reinforced composite bars for civil engineering, China Architecture and Building Press; Beijing, China.
  15. GB/T 50152(2012), Standard for test method of concrete structures, China Architecture and Building Press; Beijing, China.
  16. Ge, W., Chen, K., Guan, Z., Ashour, A., Lu, W. and Cao, D. (2021), "Eccentric compression behaviour of concrete columns reinforced with steel-FRP composite bars", Eng. Struct., 238, 112240. https://doi.org/10.1016/j.engstruct.2021.112240.
  17. Ge, W., Han, M., Guan, Z., Zhang, P., Ashour, A., Li, W., Lu, W., Cao, D. and Yao, S. (2021), "Tension and bonding behaviour of steel-FRP composite bars subjected to the coupling effects of chloride corrosion and load", Constr. Build. Mater., 296, 123641. https://doi.org/10.1016/j.conbuildmat.2021.123641.
  18. Ge, W.J., Wang, Y.M., Ashour, A., Lu, W.G. and Cao, D.F. (2020), "Flexural performance of concrete beams reinforced with steel-FRP composite bars", Arch. Civ. Mech. Eng., 20(2), 56. https://doi.org/10.1007/s43452-020-00058-6.
  19. Guo, F., Al-Saadi, S., Raman, R.S. and Zhao, X.L. (2018), "Durability of fiber reinforced polymer (FRP) in simulated seawater sea sand concrete (SWSSC) environment", Corros. Sci., 141, 1-13. https://doi.org/10.1016/j.corsci.2018.06.022.
  20. JG/T 406 (2013), Glass FRBRE reinforced plastics rebar for civil engineering, CCI Standard; Beijing, China.
  21. Job, T. and S, R. (2021), "Prediction of the load and deflection response of concrete deep beams reinforced with FRP bars", Mech. Adv. Mater. Struct., 28(1), 43-66. https://doi.org/10.1080/15376494.2018.1549292.
  22. Kara, I.F. and Ashour, A.F. (2012), "Flexural performance of FRP reinforced concrete beams", Compos. Struct., 94(5), 1616-1625. https://doi.org/10.1016/j.compstruct.2011.12.012.
  23. Kara, I.F., Ashour, A.F. and Koroglu, M.A. (2015), "Flexural behavior of hybrid FRP/steel reinforced concrete beams", Compos. Struct., 129, 111-121. https://doi.org/10.1016/j.compstruct.2015.03.073.
  24. Lau, D. and Pam, H.J. (2010), "Experimental study of hybrid FRP reinforced concrete beams", Eng. Struct., 32(12), 3857-3865. https://doi.org/10.1016/j.engstruct.2010.08.028.
  25. Lin, J., Huang, P., Guo, Y., Guo, X., Zeng, J., Zhao, C. and Chen, Z. (2020a), "Fatigue behavior of RC beams strengthened with CFRP laminate under hot-wet environments and vehicle random loads coupling", Int. J. Fatigue., 131, 105329. https://doi.org/10.1016/j.ijfatigue.2019.105329.
  26. Lin, J., Song, Y., Xie, Z., Guo, Y., Yuan, B., Zeng, J. and Wei, X. (2020b), "Static and dynamic mechanical behavior of engineered cementitious composites with PP and PVA fibers", J. Build. Eng., 29, 101097. https://doi.org/10.1016/j.jobe.2019.101097.
  27. Lin, J., Su, J, Pan, H., Peng, Y., Guo, Y., Chen, W., Sun, X., Yuan, X., Liu, G. and Lan, X. (2022), "Dynamic compression behavior of ultra-high performance concrete with hybrid polyoxymethylene fiber and steel fiber", J. Mater. Res. Technol., 20, 4473-4486. https://doi.org/10.1016/j.jmrt.2022.08.139.
  28. Mustafa, S.A. and Hassan, H.A. (2018), "Behavior of concrete beams reinforced with hybrid steel and FRP composites", HBRC J., 14(3), 300-308. https://doi.org/10.1016/j.hbrcj.2017.01.001.
  29. Oehlers, D.J., Muhamad, R. and Ali, M.M. (2013), "Serviceability flexural ductility of FRP RC beams: a discrete rotation approach", Constr. Build. Mater., 49, 974-984. https://doi.org/10.1016/j.conbuildmat.2012.10.001.
  30. Oudah, F. and El-Hacha, R. (2012), "A new ductility model of reinforced concrete beams strengthened using Fiber Reinforced Polymer reinforcement", Compos. Part B Eng.., 43(8), 3338-3347. https://doi.org/10.1016/j.compositesb.2012.01.071.
  31. Qin, R., Zhou, A. and Lau, D. (2017), "Effect of reinforcement ratio on the flexural performance of hybrid FRP reinforced concrete beams", Compos. Part B Eng.., 108, 200-209. https://doi.org/10.1016/j.compositesb.2016.09.054.
  32. Smith, S.T., Zhang, H. and Wang, Z. (2013), "Influence of FRP anchors on the strength and ductility of FRP-strengthened RC slabs", Constr. Build. Mater., 49, 998-1012. https://doi.org/10.1016/j.conbuildmat.2013.02.006.
  33. Sun, Z., Wu, G., Wu, Z. and Zhang, M. (2011), "Seismic behavior of concrete columns reinforced by Steel-FRP composite bars", J. Compos. Constr., 15(5), 696-706. https://doi.org/10.1061/(ASCE)CC.1943-5614.0000199.
  34. Teng, J.G., Chen, J. and Smith, S.T. (2002), FRP: Strengthened RC Structures, China Bbuilding Industry Press, Beijing, China.
  35. Theriault, M. and Benmokrane, B. (1998), "Effects of FRP reinforcement ratio and concrete strength on flexural behavior of concrete beams", J. Compos. Constr., 2(1), 7-16. https://doi.org/10.1061/(ASCE)1090-0268(1998)2:1(7).
  36. Toutanji, H. and Deng, Y. (2003), "Deflection and crack-width prediction of concrete beams reinforced with glass FRP rods", Constr. Build. Mater., 17(1), 69-74. https://doi.org/10.1016/S0950-0618(02)00094-6.
  37. Wu, G., Sun, Z.Y., Wu, Z.S. and Luo, Y.B. (2012), "Mechanical properties of Steel-FRP Composite Bars (SFCBs) and performance of SFCB reinforced concrete structures", Adv. Struct. Eng., 15(4), 625-635. https://doi.org/10.1260/1369-4332.15.4.625.
  38. Wu, G., Wu, Z., Luo, Y., Sun, Z. and Hu, X. (2010), "Mechanical properties of steel-FRP composite bar under uniaxial and cyclic tensile loads", J. Mater. Civil Eng., 22(10), 1056-1066. https://doi.org/10.1061/(ASCE)MT.1943-5533.0000110.
  39. Xiao, S., Lin, J., Li, L., Guo, Y., Zeng, J., Xie, Z., Wei, F. and Li, M. (2021), "Experimental study on flexural behavior of concrete beam reinforced with GFRP and steel-fiber composite bars", J. Build. Eng.., 43, 103087. https://doi.org/10.1016/j.jobe.2021.103087.
  40. Yang, Y., Pan, D., Wu, G. and Cao, D. (2021), "A new design method of the equivalent stress-strain relationship for hybrid (FRP bar and steel bar) reinforced concrete beams", Compos. Struct., 270, 114099. https://doi.org/10.1016/j.compstruct.2021.114099.
  41. Zhao, D., Pan, J., Zhou, Y., Sui, L. and Ye, Z. (2020), "New types of steel-FRP composite bar with round steel bar inner core: Mechanical properties and bonding performances in concrete", Constr. Build. Mater., 242, 118062. https://doi.org/10.1016/j.conbuildmat.2020.118062.
  42. Zhou, Y., Gao, H., Hu, Z., Qiu, Y., Guo, M., Huang, X. and Hu, B. (2020), "Ductile, durable, and reliable alternative to FRP bars for reinforcing seawater sea-sand recycled concrete beams: steel/FRP composite bars", Constr. Build. Mater., https://doi.org/10.1016/j.conbuildmat.2020.121264.
  43. Zhou, Y., Zheng, Y., Pan, J., Sui, L., Xing, F., Sun, H. and Li, P. (2019), "Experimental investigations on corrosion resistance of innovative steel-FRP composite bars using X-ray microcomputed tomography", Compos. Part B Eng.., 161, 272-284. https://doi.org/10.1016/j.compositesb.2018.10.069.