Wind and Structures

  • 제35권3호
  • /
  • Pages.193-211
  • /
  • 2022
  • /
  • 1226-6116(pISSN)
  • /
  • 1598-6225(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Aerodynamic modification of setback distance at half height of the tall building to minimize the wind effect

  • Bairagi, Amlan Kumar (Department of Civil Engineering, Indian Institute of Engineering Science and Technology) ;
  • Dalui, Sujit Kumar (Department of Civil Engineering, Indian Institute of Engineering Science and Technology)
  • 투고 : 2022.01.14
  • 심사 : 2022.10.05
  • 발행 : 2022.09.25
⟨ 이전 논문 다음 논문 ⟩

초록

The present study focuses on aerodynamic parameters behaviors and control on the single and double side setback building models at the buildings mid-height. The study is conducted by computational fluid dynamics (CFD) simulation. This study estimates the face wise pressure coefficient on single side setback buildings with a setback range of 20%-50% and double side setback buildings with setbacks ranging from 10%-25%. The polynomial fitted graphs from CFD data predict the Cp on different setback model faces within permissible limit ±13% error. The efficient model obtained according to the minimum drag, lift, and moment consideration for along and across wind conditions. The study guides the building tributary area doesn't control the drag, lift, and moment on setback type buildings. The setback distance takes a crucial role in that. The 20% double side setback model is highly efficient to regulate the moment for both along and across wind conditions. It reduces 17.5% compared to the 20% single side setback and 14% moment compared to the 10% double side setback models. The double side setback building is more efficient to control 4.2% moment than the single side setback building

키워드

과제정보

The authors thank the editor for deciding the manuscript in the reputed journal. The authors also thank the reviewers for the valuable comments on the manuscript.

참고문헌

  1. Abambres, M. and He, J. (2019), "Neural network-based analytical model to predict the shear strength of steel girders with a trapezoidal corrugated web", SSRN Electronic J., 1-33. https://doi.org/10.2139/ssrn.3368669.
  2. Adamek, K., Vasan, N., Elshaer, A., English, E. and Bitsuamlak, G. (2017), "Pedestrian level wind assessment through city development: A study of the financial district in Toronto", Sustain. Cities Soc., 35, 178-190. https://doi.org/10.1016/j.scs.2017.06.004.
  3. Ansys 15 (2013), ANSYS Fluent Theory Guide (Issue November).
  4. AS/NZS: 1170.2 (2002), Structural design actions. Part 2: Wind Actions, Standards Australia/Standards New Zealand, Sydney, Wellington.
  5. ASCE/SEI: 7-10 (2010), Minimum Design Loads for Buildings and Other Structures, Structural Engineering Institute of the American Society of Civil Engineering (ASCE), Reston, Va.
  6. Baghaei Daemei, A. and Rahman Eghbali, S. (2019), "Study on aerodynamic shape optimization of tall buildings using architectural modifications in order to reduce wake region", Wind Struct., 29(2), 139-147. https://doi.org/10.12989/was.2019.29.2.139.
  7. Bairagi, A.K. and Dalui, S.K. (2018a), "Comparison of aerodynamic coefficients of setback tall buildings due to wind load", Asian J. Civil Eng., 19(2), 205-221. https://doi.org/10.1007/s42107-018-0018-3.
  8. Bairagi, A.K. and Dalui, S.K. (2018b), "Aerodynamic effects on setback tall building using CFD simulation", Int. J. Mech. Product. Eng. Res. Develop., June, 413-420.
  9. Bairagi, A.K. and Dalui, S.K. (2020a), "Forecasting of wind induced pressure on setback building using artificial neural network", Periodica Polytechnica Civil Eng., 64(3), 751-763. https://doi.org/10.3311/ppci.15769.
  10. Bairagi, A.K. and Dalui, S.K. (2020b), "Distribution of wind pressure around different shape tall building", Lecture Notes on Multidisciplinary Industrial Engineering Advances in Computational Methods in Manufacturing, ERCAM, 31-38. https://doi.org/10.1007/978-981-15-3254-2_4.
  11. Bairagi, A.K. and Dalui, S.K. (2020c), "Spectral density at roof of setback tall building due to time variant wind load", Lecture Notes on Multidisciplinary Industrial Engineering Advances in Computational Methods in Manufacturing, 21-29. https://doi.org/10.1007/978-981-15-3254-2_3.
  12. Bairagi, A.K. and Dalui, S.K. (2021a), "Estimation of wind load on stepped tall building using CFD simulation", Iran. J. Sci. Technol. - Transact. Civil Eng., 45(June), 707-727. https://doi.org/10.1007/s40996-020-00535-1.
  13. Bairagi, A.K. and Dalui, S.K. (2021b), "Prediction of pressure coefficient on setback building by artificial neural network", Canadian J. Civil Eng., https://doi.org/10.1139/cjce-2020-0100.
  14. Bairagi, A.K. and Dalui, S.K. (2021c), "Wind environment around the setback building models", Build. Simulat., 14(October), 1525-1541. https://doi.org/https://doi.org/10.1007/s12273-020-0758-3.
  15. Bairagi, A.K. and Dalui, S.K. (2022), "Prediction of pressure coefficient of setback building using backpropagation neural networks", In Recent Advances in Computational and Experimental Mechanics, Vol-I, Springer Singapore. https://doi.org/10.1139/cjce-2020-0100.
  16. Bechmann, A., Sorensen, N.N., Berg, J., Mann, J. and Rethore P.E. (2011), "The Bolund Experiment, Part II: Blind Comparison of Microscale Flow Models", Bound.-Lay. Meteorl., 141, 245-271, https://doi.org/10.1007/s10546-011-9637-x.
  17. Ben Ramoul, L., Korichi, A., Popa, C., Zaidi, H. and Polidori, G. (2019), "Numerical study of flow characteristics and pollutant dispersion using three RANS turbulence closure models", Environment. Fluid Mech., 19(2), 379-400. https://doi.org/10.1007/s10652-018-9628-2.
  18. Blocken, B. (2015), "Computational Fluid Dynamics for urban physics: Importance, scales, possibilities, limitations and ten tips and tricks towards accurate and reliable simulations", Build. Environ., 91(9), 219-245. doi: 10.1016/j.buildenv.2015.02.015.
  19. BS: 6399-2 (1997), British Standard: Loading for Buildings Part 2. Code of Practice for Wind Loads, British Standard Institution, London, UK.
  20. Chan, T.L., Dong, G., Leung, C.W., Cheung, C.S. and Hung, W.T. (2002), "Validation of a two-dimensional pollutant dispersion model in an isolated street canyon", Atmos. Environ., 36, 861-872. https://doi.org/10.1016/S1352-2310(01)00490-3
  21. Chauhan, B.S., Chakrabarti, A. and Ahuja, A.K. (2021), "Investigation of wind load alteration on rectangular crosssection tall building due to change in relative orientation of interfering building", Structures, 31(June), 970-981. https://doi.org/10.1016/j.istruc.2021.02.011.
  22. Chay, M.T., Wilson, R. and Albermani, F. (2008), "Gust occurrence in simulated non-stationary winds", J. Wind Eng. Ind. Aerod., 96(10-11), 2161-2172. https://doi.org/10.1016/j.jweia.2008.02.059.
  23. Chen, X. (2014), "Extreme value distribution and peak factor of crosswind response of flexible structures with nonlinear aeroelastic effect", J. Struct. Eng. (United States), 140(12), 1-18. https://doi.org/10.1061/(ASCE)ST.1943-541X.0001017.
  24. Cui, W. and Caracoglia, L. (2017), "Examination of experimental variability in HFFB testing of a tall building under multidirectional winds", J. Wind Eng. Ind. Aerod., 171(September), 34-49. https://doi.org/10.1016/j.jweia.2017.09.001.
  25. Elshaer, A. and Bitsuamlak, G. (2018), "Multiobjective aerodynamic optimization of tall building openings for windinduced load reduction", J. Struct. Eng. (United States), 144(10). https://doi.org/10.1061/(ASCE)ST.1943-541X.0002199.
  26. Elshaer, A., Bitsuamlak, G. and El Damatty, A. (2016), "Aerodynamic optimization to reduce wind loads on tall buildings", In Proceedings, Annual Conference - Canadian Society for Civil Engineering, 3(June), 1749-1759.
  27. EN: 1991-1-4:2005/AC (2010), Eurocode 1: Actions on Structures-part 1-4: General Actions-Wind Actions, European Standard (Eurocode), European Committee for Standardization (CEN), Brussels, Belgium.
  28. Fernandez-Caban, P.L., Masters, F.J. and Phillips, B.M. (2018), "Predicting roof pressures on a low-rise structure from freestream turbulence using artificial neural networks", Front. Built Environ., 4(November), 1-16. https://doi.org/10.3389/fbuil.2018.00068.
  29. Ferziger, J.H., Peri, M. and Street, R.L. (2002), Comput. Meth. Fluid Dyn. (Vol. 3), Springer.
  30. Franke, J. (2006), "Recommendations of the COST action C14 on the use of CFD in predicting pedestrian wind environment", Fourth Int. Symposium Comput. Wind Eng., 529-532.
  31. Franke J., Hellsten A. and Schlunzen Heinke B.C. (2007), "Best practice guideline for the CFD simulation of flows in the urban environment, COST Action 732", Quality Assurance Improv. Microscale Meteorol. Models. https://doi.org/10.1016/S1091-255X(01)80095-0.
  32. Franke, J., Hellsten, A., Schlunzen, H. and Carissimo, B. (2010), "The best practise guideline for the CFD simulation of flows in the urban environment : an outcome of COST 732", The Fifth International Symposium on Computational Wind Engineering (CWE2010), 1-10.
  33. Fu, C.L., Lee, S.M. and Cheng, C.M. (2006), "Validation of CFD simulations on the wind loads for tall buildings' preliminary design", In The Fourth International Symposium on Computational Wind Engineering, May, 369-372.
  34. Gousseau, P., Blocken, B. and Heijst van, G.J.F. (2013), "Quality assessment of Large-eddy simulation of wind flow around a high-rise building: validation and solution verification", Comput. Fluids, 79, 120-133. https://doi.org/10.1016/j.compfluid.2013.03.006.
  35. Huang, Z. and Gu, M. (2019), "Estimation of peak factor and gust factor of nonstationary wind speed", J. Wind Eng. Ind. Aerod., 193(July), 103953. https://doi.org/10.1016/j.jweia.2019.103953.
  36. I.S: 875 Part-3 (2015), "Indian standard code of practice for the design loads (other than earthquake) for buildings and structures (part-3. wind loads) ", Bureau of Indian Standards, New Delhi, India.
  37. Iranmanesh, A. and Kaveh, A. (1999), "Structural optimization by gradient based neural networks", Int. J. Numer. Meth. Eng., 46(2), 297-311. https://doi.org/10.1002/(SICI)1097-0207(19990920)46:2<297::AID-NME679>3.0.CO;2-C
  38. Jiao, J. and Yoshie, R. (2012), "Large-eddy simulation of flow around obstacle arrays using drag force method of gas-solid two-phase flow", In Proceedings of the 7th International Colloquium on Bluff Body Aerodynamics and Applications, Shanghai, China.
  39. Kar, R., Dalui, S.K. and Bhattacharjya, S. (2019), "An efficient optimization approach for wind interference effect on octagonal tall building", Wind Struct., 28(2), 111-128. https://doi.org/10.12989/was.2019.28.2.111.
  40. Kataoka, H. and Mizuno, M. (2002), "Numerical flow computation around aeroelastic 3D square cylinder using inflow turbulence", Wind Struct., 5(2-4), 379-392. https://doi.org/10.12989/was.2002.5.2_3_4.379.
  41. Kaveh, A. and Raeisi, D.M. (2007), "Application of artificial neural networks for predicting the displacements of domes under wind loading", Int. J. Ind. Eng. Product. Manage., 18(2), 45-53.
  42. Kaveh, A., Dadras Eslamlou, A., Javadi, S.M. and Geran Malek, N. (2021), "Machine learning regression approaches for predicting the ultimate buckling load of variable-stiffness composite cylinders", Acta Mechanica, 232(3), 921-931. https://doi.org/10.1007/s00707-020-02878-2.
  43. Kim, W., Yoshida, A. and Tamura, Y. (2019), "Wind-induced aerodynamic instability of super-tall buildings with various cross-sectional shapes", Int. J. High-Rise Build., 8(4), 303-311. https://doi.org/10.21022/IJHRB.2019.8.4.303.
  44. Kim, Y.C., Tamura, Y., Tanaka, H., Ohtake, K., Bandi, E.K. and Yoshida, A. (2014), "Wind-induced responses of super-tall buildings with various atypical building shapes", J. Wind Eng. Ind. Aerod., 133, 191-199. https://doi.org/10.1016/j.jweia.2014.06.004.
  45. Kim, Y.C., Xu, X., Yang, Q. and Tamura, Y. (2019), "Shape effects on aerodynamic and pedestrian-level wind characteristics and optimization for tall and super-tall building design", Int. J. High-Rise Build., 8(4), 235-253. https://doi.org/10.21022/IJHRB.2019.8.4.235.
  46. Kumar, D. and Dalui, S.K. (2021), "Aerodynamic modifications for reduction of wind loads on cross plan shaped tall building", Wind Struct., 33(2), 123-139. https://doi.org/10.12989/was.2021.33.2.123.
  47. Li, X. X., Liu, C.H. and Leung, D.Y.C. (2005), "Development of a k-ε model for the determination of air exchange rates for street canyons", Atmos. Environ., 39(38), 7285-7296. https://doi.org/10.1016/j.atmosenv.2005.09.007.
  48. Li, Y. and Mei, F. (2020), "Deep learning-based method coupled with small sample learning for solving partial differential equations", Multimedia Tools Appl., https://doi.org/10.1007/s11042-020-09142-8.
  49. Li, Y., Tian, X., Tee, K.F., Li, Q.S. and Li, Y.G. (2018), "Aerodynamic treatments for reduction of wind loads on highrise buildings", J. Wind Eng. Ind. Aerod., 172(November), 107-115. https://doi.org/10.1016/j.jweia.2017.11.006.
  50. Lin, N., Letchford, C., Tamura, Y., Liang, B. and Nakamura, O. (2005), "Characteristics of wind forces acting on tall buildings", J. Wind Eng. Ind. Aerod., 93(3), 217-242. https://doi.org/10.1016/j.jweia.2004.12.001.
  51. Liu, J. and Niu, J. (2016), "CFD simulation of the wind environment around an isolated high-rise building: An evaluation of SRANS, LES and DES models", Build. Environ., 96, 91-106. https://doi.org/10.1016/j.buildenv.2015.11.007.
  52. Mandal, S., Dalui, S.K. and Bhattacharjya, S. (2020), "Effect of aerodynamic modifications on a tall building with horizontal irregularity", Advances in Structures, Systems and Materials, Lecture Notes on Multidisciplinary Industrial Engineering (99-107), Springer Nature Singapore Pte Ltd. https://doi.org/10.1007/978-981-15-3254-2_10.
  53. Meng, Y. and Hibi, K. (1998), "Turbulent measurements of the flow field around a high-rise building", J. Wind Eng., 76, 55-64. https://doi.org/10.5359/jawe.1998.76_55.
  54. Mengistu, T. and Ghaly, W. (2008), "Aerodynamic optimization of turbomachinery blades using evolutionary methods and ANNbased surrogate models", Optimiz. Eng., 9(3), 239-255. https://doi.org/10.1007/s11081-007-9031-1.
  55. Mochida, A., Tominaga, Y. and Ryuichiro, Y. (2006), "AIJ guideline for practical applications of CFD to wind environment around buildings", In The Fourth International Symposium on Computational Wind Engineering, October.
  56. Mohammadi, A., Azizinamini, A., Griffis, L. and Irwin, P. (2019), "Performance assessment of an existing 47-story high-rise building under extreme wind loads", J. Struct. Eng. (United States), 145(1), 1-16. https://doi.org/10.1061/(ASCE)ST.1943-541X.0002239.
  57. Montoya, M.C., Nieto, F. and Hernandez, S. (2021), "Multiobjective shape optimization of tall buildings considering profitability and multidirectional wind-induced accelerations using CFD, surrogates, and the reduced basis approach", Wind Struct., 32(4), 355-369. https://doi.org/10.12989/was.2021.32.4.355.
  58. Mooneghi, M.A., Irwin, P., Chowdhury, A.G., Technology, A. and Francisco, S. (2015), "Partial turbulence simulation method for small structures", In 14th International Conference on Wind Engineering, June, 1-11.
  59. Moorjani, R.R., Devin, A.F., Lombardo, F.T., Bradley, S. and Baker, W.F. (2018), "Wind tunnel testing as an influential part of the design process of tall buildings", In 5th American Association for Wind Engineering Workshop (5AAWE), August.
  60. Mukherjee, A. and Bairagi, A.K. (2017), "Wind pressure and velocity pattern around "N" plan shape tall building-A case study", Asian J. Civil Eng., 18(8), 1241-1258.
  61. Mukherjee, S. and Bairagi, A.K. (2020), "Power spectral density on principal building due to setback interfering building", In Lecture Notes on Multidisciplinary Industrial Engineering Advances in Computational Methods in Manufacturing, ERCAM, 119-126. https://doi.org/10.1007/978-981-15-3254-2_12.
  62. Nguyen, V.T., Nguyen, T.C. and Nguyen, J. (2019), "Numerical simulation of turbulent flow and pollutant dispersion in urban street canyons", Atmosphere, 10(11). https://doi.org/10.3390/atmos10110683.
  63. Paul, R. and Dalui, S.K. (2020), "Prognosis of wind-tempted mean pressure coefficients of cross-shaped tall buildings using artificial neural network", Periodica Polytechnica Civil Eng. Prognosis, 1-20.
  64. Peterka, J.A. (1983), "Selection of local peak pressure coefficients for wind tunnel studies of buildings", J. Wind Eng. Ind. Aerod., 13(1-3), 477-488. https://doi.org/10.1016/0167-6105(83)90166-6.
  65. Qiu, Y., San, B. and Zhao, Y. (2019), "Numerical simulation and optimization of wind effects of porous parapets on low-rise buildings with flat roofs", Adv. Civil Eng., 2019. https://doi.org/10.1155/2019/3402613.
  66. Rajasekarababu, K.B., Vinayagamurthy, G. and Rajan, S.S. (2019), "Experimental and computational investigation of outdoor wind flow around a setback building", Build. Simulat., 12(5), 891-904. https://doi.org/10.1007/s12273-019-0514-8.
  67. Rej, A. and Bairagi, A.K. (2020), "Wind load analysis of a tall structure with sharp and corner cut edges", In Lecture Notes on Multidisciplinary Industrial Engineering Advances in Computational Methods in Manufacturing, Ercam, 175-183. https://doi.org/10.1007/978-981-15-3254-2_17.
  68. Roy, K. and Bairagi, A. (2016), "Wind pressure and velocity around stepped unsymmetrical plan shape tall building using CFD simulation- a case study", Asian J. Civil Eng., 17(8), 1055-1075.
  69. Sadrehaghighi, I. (2019), "Turbulence modeling -A review", In CFD Open Series, July, https://doi.org/10.13140/RG.2.2.35857.33129/2.
  70. Sanyal, P. and Dalui, S.K. (2020a), "Comparison of aerodynamic coefficients of various types of Y-plan-shaped tall buildings", Asian J. Civil Eng., 0123456789. https://doi.org/10.1007/s42107-020-00265-9.
  71. Sanyal, P. and Dalui, S.K. (2020b), "Effect of corner modifications on 'Y' plan shaped tall building under wind load", Wind Struct., 30(3), 245-260. https://doi.org/10.12989/was.2020.30.3.245.
  72. Simiu, E. and Scanlan, R.H. (1996), "Wind effects on structures Fundamentals and Applications to Design", John Wiley and Sons.
  73. Simiu, E. and Yeo, D. (1969), "Wind effects on structures modern structural design for wind", John Wiley and Sons Ltd, 27.
  74. Singh, J. and Roy, A.K. (2019), "Effects of roof slope and wind direction on wind pressure distribution on the roof of a square plan pyramidal low-rise building using CFD simulation", Int. J. Adv. Struct. Eng., 11(2), 231-254. https://doi.org/10.1007/s40091-019-0227-3.
  75. SP 64 (S&T) (2001), Explanatory Handbook on Indian Standard Code of Practice for Design Loads (Other than Earthquake) for Buildings and Structures.
  76. Sun, X., Liu, H., Su, N. and Wu, Y. (2017), "Investigation on wind tunnel tests of the Kilometer skyscraper", Eng. Struct., 148, 340-356. https://doi.org/10.1016/j.engstruct.2017.06.052.
  77. Tamura, Y., Tanaka, H., Ohtake, K., Kim, Y.C., Yoshida, A., Bandi, E.K., Xu, X. and Yang, Q. (2015), "Aerodynamic control of wind-induced vibrations and flow around super-tall buildings", In 6th International Conference on Advances in Experimental Structural Engineering.
  78. Tominaga, Y. and Stathopoulos, T. (2009), "Numerical simulation of dispersion around an isolated cubic building: Comparison of various types of k-ε models", Atmos. Environ., 43(20), 3200-3210. https://doi.org/10.1016/j.atmosenv.2009.03.038.
  79. Tominaga, Y. and Stathopoulos, T. (2010), "Numerical simulation of dispersion around an isolated cubic building: Model evaluation of RANS and LES", Build. Environ., 45(10), 2231-2239. https://doi.org/10.1016/j.buildenv.2010.04.004.
  80. Tominaga, Y., Mochida, A., Murakami, S. and Sawaki, S. (2008), "Comparison of various revised k-ε models and LES applied to flow around a high-rise building model with 1:1:2 shape placed within the surface boundary layer", J. Wind Eng. Ind. Aerod., 96(4), 389-411. https://doi.org/10.1016/j.jweia.2008.01.004.
  81. Tominaga, Y., Mochida, A., Yoshie, R., Kataoka, H., Nozu, T., Yoshikawa, M. and Shirasawa, T. (2008), "AIJ guidelines for practical applications of CFD to pedestrian wind environment around buildings", J. Wind Eng. Ind. Aerod., 96(10-11), 1749-1761. https://doi.org/10.1016/j.jweia.2008.02.058.
  82. van Druenen, T., van Hooff, T., Montazeri, H. and Blocken, B. (2019), "CFD evaluation of building geometry modifications to reduce pedestrian-level wind speed", Build. Environ., 163(July), 106293. https://doi.org/10.1016/j.buildenv.2019.106293.
  83. Vasilopoulos, K., Sarris, I.E. and Tsoutsanis, P. (2019), "Assessment of air flow distribution and hazardous release dispersion around a single obstacle using Reynolds-averaged Navier-Stokes equations", Heliyon, 5(4), e01482. https://doi.org/10.1016/j.heliyon.2019.e01482.
  84. Wang, D., Yu, X.J., Zhou, Y. and Tse, K.T. (2015), "A combination method to generate fluctuating boundary conditions for large eddy simulation", Wind Struct., 20(4), 579-607. https://doi.org/10.12989/was.2015.20.4.579.
  85. Wang, J. and Cheng, C. (2010), "The application of artificial neural networks to predict wind spectra for rectangular cross-section buildings", Wind Eng.
  86. Wu, X., Jafari, M., Sarkar, P. and Sharma, A. (2020), "Verification of DES for flow over rigidly and elastically-mounted circular cylinders in normal and yawed flow", J. Fluids Struct., 94, 102895. https://doi.org/10.1016/j.jfluidstructs.2020.102895.
  87. Xie, J. and Yang, X. (2019), "Exploratory study on wind-adaptable design for super-tall buildings", Wind Struct., 29(6), 489-497. https://doi.org/10.12989/was.2019.29.6.489.
  88. Yoshie, R., Mochida, A., Tominaga, Y., Kataoka, H., Harimoto, K., Nozu, T. and Shirasawa T. (2007), "Cooperative project for CFD prediction of pedestrian wind environment in the Architectural Institute of Japan", J. Wind Eng. Ind. Aerod., 95, 1551-1578. https://doi.org/10.1016/j.jweia.2007.02.023.
  89. Zhang, C., Yang, S., Shu, C., Wang, L. and Stathopoulos, T. (2020), "Wind pressure coefficients for buildings with air curtains", J. Wind Eng. Ind. Aerod., 205(May), 104265. https://doi.org/10.1016/j.jweia.2020.104265.
  90. Zhang, J.W. and Li, Q.S. (2017), "Wind tunnel test and field measurement study of wind effects on a 600-m-high super-tall building", Struct. Des. Tall Spec. Build., 26(17), 1-17. https://doi.org/10.1002/tal.1385.
  91. Zhang, X., Weerasuriya, A.U., Lu, B., Tse, K.T., Liu, C.H. and Tamura, Y. (2020), "Pedestrian-level wind environment near a super-tall building with unconventional configurations in a regular urban area", Build. Simulat., 13(2), 439-456. https://doi.org/10.1007/s12273-019-0588-3.
  92. Zhang, X., Weerasuriya, A.U., Zhang, X., Tse, K.T., Lu, B., Li, C.Y. and Liu, C.H. (2020), "Pedestrian wind comfort near a super-tall building with various configurations in an urban-like setting", Build. Simulat., 13(6), 1385-1408. https://doi.org/10.1007/s12273-020-0658-6.
  93. Zhou, T. Yang, Q., Yan, B., Deng, X., Yuan, Y. (2022), "Detached eddy simulation of turbulent flow fields over steep hilly terrain", J. Wind Eng. Ind. Aerod., 221(104906): doi.org/10.1016/j.jweia.2022.104906.