Structural Engineering and Mechanics

  • 제84권2호
  • /
  • Pages.225-238
  • /
  • 2022
  • /
  • 1225-4568(pISSN)
  • /
  • 1598-6217(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Flexural behavior and flexural capacity prediction of precast prestressed composite beams

  • Hu, Manxin (School of Civil Engineering, Xi'an University of Architecture & Technology) ;
  • Yang, Yong (School of Civil Engineering, Xi'an University of Architecture & Technology) ;
  • Yu, Yunlong (School of Civil Engineering, Xi'an University of Architecture & Technology) ;
  • Xue, Yicong (School of Civil Engineering, Xi'an University of Architecture & Technology)
  • 투고 : 2022.05.11
  • 심사 : 2022.08.10
  • 발행 : 2022.10.25
⟨ 이전 논문 다음 논문 ⟩

초록

In order to improve the cracking resistance of reinforced concrete and give full play to the advantages of prefabricated assembly structure in construction, prestressed reinforced concrete composite beam (PRCC) is proposed. Through the bending static test of seven I-shaped beam specimens, the bending failure modes and bearing capacity of PRCC and reinforced concrete composite beam are compared and analyzed, and the effects of prestress size, prestressed reinforcement layout and prestress application sequence on the flexural behavior of PRCC beams are studied. The results show that the cracking load and ultimate load of PRCC beams significantly increased after prestressing, and prestressed tendons can effectively control the crack development. With the increase of prestressing degree, the deformation resistance and bending stiffness of PRCC beams are increased. The application sequence of prestress has little influence on the mechanical properties of PRCC beams. The crack width, stiffness and normal section bearing capacity of PRCC beam are analyzed, and the calculated results are in good agreement with the experimental results.

키워드

과제정보

The research described in this paper was financially supported by the Youth Program of the National Natural Science Foundation of China (Grant No. 51908450), the Key R&D Program of Shaanxi Province (Grant No. 2021SF-463), Basic Research Program of Natural Science of Shaanxi Province (Grant No. 2019JC-30) and the Key Lab Program of Shaanxi Education Department (Grant No.20JS068). The financial support is highly appreciated.

참고문헌

  1. Dong, Y.H., Jaillon, L. and Chu, P. (2015), "Comparing carbon emissions of precast and cast-in-situ construction methods-A case study of high-rise private building", Constr. Build. Mater., 99, 39-53. https://doi.org/10.1016/j.conbuildmat.2015.08.145.
  2. Du, J.S., Au, F.T.K. and Cheung, Y.K. (2008), "Ductility analysis of prestressed concrete beams with unbonded tendons", Eng. Struct., 30(1), 13-21. https://doi.org/10.1016/j.engstruct.2007.02.015.
  3. Fu, C., Zhu, Y. and Wang, Y. (2020), "Stiffness assessment of cracked post-tensioned concrete beams with unbonded tendons based on the cracking pattern", Eng. Struct., 214, 110599. https://doi.org/10.1016/j.engstruct.2020.110599.
  4. GB 50010-2010 (2015), Code for Design of Concrete Structures, China Architecture and Building Press, Beijing.
  5. Heo, S., Shin, S. and Lee, C. (2013), "Flexural behavior of concrete beams internally prestressed with unbonded carbon-fiber-reinforced polymer tendons", J. Compos. Constr., 17(2), 167-175. https://doi.org/10.1061/(ASCE)CC.1943-5614.0000306.
  6. Hong, W.K., Kim, J.M. and Park, S.C. (2009), "Composite beam composed of steel and precast concrete. (Modularized Hybrid System, MHS) Part II: Analytical investigation", Struct. Des. Tall Spec. Build., 18(8), 891-905. https://doi.org/10.1002/tal.484.
  7. Hong, W.K., Kim, S.I. and Park, S.C. (2010), "Composite beam composed of steel and precast concrete (modularized hybrid system). Part IV: Application for multi-residential housing", Struct. Des. Tall Spec. Build., 19(7), 707-727. https://doi.org/10.1002/tal.506.
  8. Hong, W.K., Park, S.C. and Kim, J.M. (2010), "Composite beam composed of steel and precast concrete (Modularized Hybrid System, MHS) Part I: Experimental investigation", Struct. Des. Tall Spec. Build., 19(3), 275-289. https://doi.org/10.1002/tal.485.
  9. Hong, W.K., Park, S.C. and Lee, H.C. (2010), "Composite beam composed of steel and precast concrete (modularized hybrid system). Part III: Application for a 19-storey building", Struct. Des. Tall Spec. Build., 19(6), 679-706. https://doi.org/10.1002/tal.507.
  10. Jaillon, L. and Poon, C.S. (2010), "Design issues of using prefabrication in Hong Kong building construction", Constr. Manage. Econo., 28(10), 1025-1042. https://doi.org/10.1080/01446193.2010.498481.
  11. Jia, J.Q., Meng, G. and Feng, S. (2015), "Flexural ductility of prestressed steel reinforced ultra-high strength concrete beams", J. Harbin Inst. Technol., 47(04), 64-70. https://doi.org/10.11918/j.issn.0367-6234.2015.04.011.
  12. Jia, J.Q., Meng, G. and Zhu, W.Q. (2014), "Experimental study on flexural capacity of prestressed steel reinforced ultra-high strength composite concrete beams", J. Build. Struct., 35(09),1-10. https://doi.org/10.14006/j.jzjgxb.2014.09.001.
  13. Jia, J.Q., Yao, D.L. and Yu, F. (2014), "Experimental study on shear capacity of prestressed I-steel ultrahigh reinforced concrete beams", Eng. Mech., 31(08), 126-133. https://doi.org/10.6052/j.issn.1000-4750.2013.03.0155.
  14. Li, S., Zhang, Y. and Chen, W. (2020), "Bending performance of unbonded prestressed basalt fiber recycled concrete beams", Eng. Struct., 221, 110937. https://doi.org/10.1016/j.engstruct.2020.110937.
  15. Meng, X., Jia, J.Q. and Wang, Y.B. (2015), "FEM analysis on the flexural behaviour of prestressed steel reinforced ultra-high-strength concrete beams", J. Water Resour. Arch. Eng., 13(01), 65-69+103. https://doi.org/10.3969/j.issn.1672-1144.2015.01.014.
  16. Nguyen, D.L., Thai, D.K. and Nguyen, H.T.T. (2021), "Responses of composite beams with high-performance fiber-reinforced concrete", Constr. Build. Mater., 270, 121814. https://doi.org/10.1016/j.conbuildmat.2020.121814.
  17. Tam, V.W.Y., Tam, C.M. and Zeng, S.X. (2007), "Towards adoption of prefabrication in construction", Build. Environ., 42(10), 3642-3654. https://doi.org/10.1016/j.buildenv.2006.10.003.
  18. Tang, C., Zhang, G. and Song, C. (2021), "Flexural behavior of unbonded prestressed concrete bridge girders", Adv. Civil Eng., 2021, Article ID 6642513. https://doi.org/10.1155/2021/6642513.
  19. Yang, Y., Xue, Y. and Yu, Y. (2017), "Experimental study of partially precast steel reinforced concrete beams under positive bending", J. Build. Struct., 38(9), 46-53. https://doi.org/10.14006/j.jzjgxb.2017.09.006.
  20. Yang, Y., Xue, Y. and Yu, Y. (2018), "Experimental research on mechanical performance of partially precast steel reinforced concrete beams", Chin. Civil Eng. J., 51(4), 1-9+19. https://doi.org/10.15951/j.tmgcxb.2018.04.001.
  21. Yang, Y., Xue, Y.C. and Yu, Y.L. (2017), "Experimental study on flexural performance of partially precast steel reinforced concrete beams", J. Constr. Steel Res., 133, 192-201. https://doi.org/10.1016/j.jcsr.2017.02.019.
  22. Yang, Y., Yu, Y.L. and Yang, Y. (2017), "Experimental study on shear performance of partially precast steel reinforced concrete beams", J. Build Struct., 38(06), 53-60. https://doi.org/10.14006/j.jzjgxb.2017.06.006.
  23. Yao, G.F. and Xiong, X.Y. (2019), "Test and finite element study on static behaviors of unbonded prestressed steel reinforced concrete frame beams", J. Build Struct., 40(09), 104-112. https://doi.org/10.14006/j.jzjgxb.2017.0583.