풍력에너지저널 (Journal of Wind Energy)

  • 제13권3호
  • /
  • Pages.5-12
  • /
  • 2022
  • /
  • 2093-5099(pISSN)
  • /
  • 2733-9467(eISSN)
한국풍력에너지학회 (Korea Wind Energy Association)
권호 표지
DOI QR코드

DOI QR Code

PROPID 코드 활용 풍력발전기 블레이드 설계 및 CFD 기반 공력특성 비교분석

Wind turbine blade design using PROPID code and comparative analysis of aerodynamic properties based on CFD

  • 투고 : 2022.04.29
  • 심사 : 2022.08.11
  • 발행 : 2022.09.30
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

A methodology of wind turbine blade design has been established with PROPID code, which is an aerodynamic blade design tool developed by UIUC. PROPID code can design and analyze a wind turbine blade in a steady state flow. The methodology of wind turbine blade design includes an initial blade concept design, airfoil selection, basic design, and detailed design steps. Inverse design and performance analysis of the 2.3 MW U113 wind turbine blade was performed to verify the wind turbine blade design methodology. The differences in calculated power between PROPID code and GH Bladed code are under 1.0% in all wind conditions. Both blade shape design and performance analysis results using PROPID code are accurate. The aerodynamic characteristics of a U113 blade were investigated by computational fluid dynamics. Separation flow was captured by a Reynolds-averaged Navier-Stokes steady flow simulation using ANSYS CFX code. The numerical aerodynamic analysis methodology was verified by comparing the analysis results through CFD with BEMT-based program GH Bladed code results. Therefore, the blade design methodology will be applied to develop a super-capacity 20 MW wind turbine blade in the future.

키워드

과제정보

본 연구는 2020년도 정부(산업통상자원부)의 재원으로 한국에너지기술평가원(KETEP)의 지원을 받아 수행된 연구 과제(No. 20203020020030)입니다. 또한 이 성과는 2020년도 정부(과학기술정보통신부)의 재원으로 한국연구재단의 지원을 받아 수행된 연구입니다. (No. 2020R1G1A1099560)

참고문헌

  1. Wiser, R and Bolinger, M., 2015, 2015 Wind Technologies Market Report, Department of Energy, pp. 51-52 (in U.S.A)
  2. T. Burton, D. Sharpe, N.Jenkins, and E.Bossanyi., 2011, Wind energy handbook, Wiley, pp. 39-65
  3. P. J. Moriatry, and A. C. Hansen, 2005, Aerodyn Theory Manual, National Renewable Energy Laboratory
  4. Sudeepto Bose, 2014, Blade Geometry Design Using BEMT Equations And Algorithm
  5. Kang, H. K, Kim, B. S., Nam, C. D., and Lee, Y. H., 2006, "A Study on the Configuration Design and the Performance Analysis of the 20kW HAWT based on BEMT", Journal of the Korean Society of Marine Engineering, Vol. 30, No. 6, pp. 669-676.
  6. Kim, B. S, Kim, M. E, and Lee, Y. H., 2008, "Basic Configuration Design and Performance Analysis of a 100kW Wind Turbine Blade using Blade Element Momentum Theory", Journal of the Korean Society of Marine Engineering, Vol.32, No. 6, pp. 827~833.
  7. Chang, S. M., and Lee, J. H., 2007, "Aerodynamic Design of 10kW-level HAWT Rotor Bladed", The Korean Society for Aeronautical & Space Science, Vol. 35, No. 10, pp. 884-890.
  8. Kim, B. S., 2014, "Multi-MW Class Wnd Turbine Blade Design Part I : Aero-Structure Design and Integrated Load Analysis", The Korean Society of Mechanical Engineers, Vol. 38, No. 4, pp. 289-309.
  9. Sanaa Е M, Karim O., Mohammed M I., Bousselham K.,. and Abderrahmane H., 2018, uAerodynamics and Structural Analysis of Wind Turbine Blade", Science Direct, Vol. 22, pp. 747~756.
  10. Yoon, J. Y., Paek, I. S., and Yoo, N. S., 2013, "Development of an aerodynamic design program for a wind turbine blade", Journal of the Korean Solar Energy Society, Vol. 33, No. 1, pp. 40~47
  11. Yoo, C., Son Е. K., Hwang. S. M., Choi. J. C., Lee, J. J., Kim, S. W., and Lee, G. S., 2017, "Development of Aerodynamic Shape Optimization Program for Horizontal Axis Wind Turbine Blade", Korea Academy Industrial Cooperation Society, Vol. 18, No. 12, pp. 9~6.
  12. Matias, S., Ju„ Nestor, R. G., and Sergio, G. H., 2019, "Design optimization of a curved wind turbine blade using neural networks and an aero-elastic vortex method under turbulent inflow", Renewable energy, Vol. 146, pp. 1524~1535.
  13. UIUC Applied Aerodynamics Group Department of Aerospace Engineering, University of Illinois at Urbana-Champaign, 2012, PROPID User Manual Version 5.3.1,
  14. Cheol, Y., Son. Е. K, Hwang. S. M., Kim, D. J., and Kim, S. W., 2017, "10kW wind turbine blade aerodynamic design and verification", Journal of Aerospace System Engineering, Vol.ll, No.6, pp. 42-49
  15. Kim, B. S„ Kim, M. E., and Lee, Y. H., 2008. "Basic Configuration Design and Performance Analysis of a 100kW Wind Turbine Blade using Blade Element Momentum Theory", Journal of the Korean Society of Marine Engineering, Vol. 32, No. 6, pp. 827~833
  16. Kim. B. S., Kim. W. J„ Bae S. Y, Park J. H, and Kim M. N, 2011. "Aerodynamic design and performance analysis of multi-MW class wind turbine blade", Journal of Mechanical Science and Technology 25(8), pp. 1995-2002
  17. Kim. B. S, Kim. M. E, Lee. Y. H, 2008, "Predicting the Aerodynamic Characteristics of 2D Airfoil and the Performance of 3D Wind Turbine using a CFD Code", The Korean Society of Mechanical Engineers, Transactions of the Korean Society of Mechanical Engineers, pp. 549-557
  18. Langry, R.B., Menter, F.R., 2005, "Transition Modeling for General CFD Applications in Aeronautics", American Institute of Aeronautics and Astronautics, pp. 2005-522.
  19. Moon H.G, Park S.H., Ha K.T., Jeong J.H., 2021, "Multi-MW wind turbine blade vortex generator design optimization and aerodynamic characteristics analysis using CFD", Journal of Wind Energy, Vol. 12, No. 2, pp.30-36