Acknowledgement
This work was supported by the National Research Foundation of Korea (NRF) grant funded by the Korea government (MSIT) (No. NRF-2019M2D2A2048296).
References
- IAEA, IAEA Safety Standards Series (No, SSR-6), Rev. 1, Regulations for the Safe Transport of Radioactive Material, 2018.
- U.S. Nuclear Regulatory Commission, RG 7.6, Rev. 1, Design Criteria for the Structural Analysis of Shipping Cask Containment Vessels, 1978.
- U.S. Nuclear Regulatory Commission, RG 7.8, Rev. 1, Load Combinations for the Structural Analysis of Shipping Casks for Radioactive Material, 1989.
- U.S. Nuclear Regulatory Commission, NUREG-2215, Standard Review Plan for Spent Fuel Dry Storage Systems and Facilities, 2020.
- B.E. Lampinen, R.A. Jeryan, Effectiveness of polyurethane foam in energy absorbing structures, SAE Trans. 91 (1982) 2059. e2076.
- K.R.F. Andrews, G.L. England, E. Ghani, Classification of the axial collapse of cylindrical tubes under quasi-static loading, Int. J. Mech. Sci. 25 (1983) 687-696. https://doi.org/10.1016/0020-7403(83)90076-0
- ASME B&PV Code Committee, ASME B&PV Code, Sec. II, Materials, Part D, Properties, 2019.
- S.P. Kim, J.H. Kim, D.S. Sohn, H.J. Kwon, M.S. Shin, Stress-based vs. strain-based safety evaluations of spent nuclear fuel transport casks in energy-limited events, Nucl. Eng. Des. 355 (2019), 110324. https://doi.org/10.1016/j.nucengdes.2019.110324
- Y.S. Lee, C.H. Ryu, H.S. Kim, Y. Choi, A study on the free drop impact of a cask using commercial FEA codes, Nucl. Eng. Des. 235 (2005) 2219-2226. https://doi.org/10.1016/j.nucengdes.2005.03.009
- K. Sharma, D.N. Pawaskar, A. Guha, R.K. Singh, Optimization of cask for transport of radioactive material under impact loading, Nucl. Eng. Des. 273 (2014) 190-201. https://doi.org/10.1016/j.nucengdes.2014.03.021
- D.H. Kim, K.S. Seo, J.C. Lee, K.S. Bang, C.H. Cho, S.J. Lee, C.Y. Baeg, Finite element analyses and verifying tests for a shock-absorbing effect of a pad in a spent fuel storage cask, Ann. Nucl. Energy 34 (2007) 871-882. https://doi.org/10.1016/j.anucene.2007.04.012
- K.S. Kim, J.S. Kim, K.S. Choi, T.M. Shin, H.D. Yun, Dynamic impact characteristics of KN-18 SNF transport cask e Part 1: an advanced numerical simulation and validation technique, Ann. Nucl. Energy 37 (2010) 546-559. https://doi.org/10.1016/j.anucene.2009.12.023
- K.S. Kim, J.S. Kim, K.S. Choi, T.M. Shin, H.-D. Yun, Dynamic impact characteristics of KN-18 SNF transport cask e Part 2: sensitivity analysis of modeling and design parameters, Ann. Nucl. Energy 37 (2010) 560-571. https://doi.org/10.1016/j.anucene.2009.12.024
- J.E. Jeon, S.H. Han, W.S. Choi, S.H. Lee, K.S. Seo, Drop weight device fabrication and tests for a dynamic material property of shock-absorbing material and structure in transportation package, in: Transactions of the Korean Nuclear Society Spring Meeting, Jeju, Korea, May 22, 2009.
- J. Wu, J.L. Gorczyca, D.R. Leduc, J.L. England, Dynamic analysis of Hanford Unirradiated Fuel Package subjected to sequential lateral loads in hypothetical accident conditions, in: ASME Pressure Vessels and Piping Conference, 2008. Chicago, Illinois, July 27-31.
- W.S. Choi, K.S. Seo, A simple sizing optimization technique for an impact limiter based on dynamic material properties, Nucl. Eng. Des. 240 (2010) 925-932. https://doi.org/10.1016/j.nucengdes.2009.12.008
- S.Y. Zhang, Wood specific gravity-mechanical property relationship at species level, Wood Sci. Technol. 31 (1997) 181-191. https://doi.org/10.1007/BF00705884
- R.F. Luxford, L.J. Markwardt, The Strength and Related Properties of Redwood, Forest Products Lab., 1932, pp. 1-48. Technical Bulletin No. 305.
- M. Verbist, J.M. Branco, L. Nunes, Characterization of the mechanical performance in compression perpendicular to the grain of insect-deteriorated timber, Buildings 10 (2020) 14. https://doi.org/10.3390/buildings10010014
- Ch. 5 D.E. Kretschmann, Mechanical Properties of Wood, Forest Product Lab., 2010, pp. 1-46. GTR-190.
- H.T. Kim, J.M. Seo, K.W. Seo, S.H. Yoon, Y.J. Kim, C.Y. Oh, Effect of material hardening model for canister on finite element cask drop simulation for strain-based acceptance evaluation, Nucl. Eng. Technol. 54 (2022) 1098-1108. https://doi.org/10.1016/j.net.2021.09.006
- J.H. Ko, J.H. Park, I.S. Jung, G.U. Lee, C.Y. Baeg, T.M. Kim, Shielding analysis of dual purpose casks for spent nuclear fuel under normal storage conditions, Nucl. Eng. Technol. 46 (2014) 547-556. https://doi.org/10.5516/NET.08.2013.039
- T.M. Kim, H.D. Dho, C.Y. Baeg, G.U. Lee, Preliminary safety analysis of criticality for dual-purpose metal cask under dry storage conditions in South Korea, Nucl. Eng. Des. 278 (2014) 414-421. https://doi.org/10.1016/j.nucengdes.2014.08.008
- T. Borrvall, A heuristic attempt to reduce transverse shear locking in fully integrated hexahedra with poor aspect ratio, in: European LS-DYNA Conference, 2009. Salzburg, Austria, May 14-15.
- J.A. Nairn, Numerical simulations of transverse compression and densification in wood, Wood Fiber Sci. 38 (2006) 576-591.
- T. Tabarsa, Y.H. Chui, Stress-strain response of wood under radial compression. Part 1. Test method and influences of cellular properties, Wood Fiber Sci. 32 (2000) 144-152.
- S.M. Cramer, J.C. Hermanson, W.M. McMurty, Characterizing Large Strain Crush Response of Redwood, Sandia Natl. Lab., 1996, pp. 1-59. SAND96-2966.
- A.D. Silva, S. Kyriakides, Compressive response and failure of balsa wood, Int. J. Solid Struct. 44 (2007) 8685-8717. https://doi.org/10.1016/j.ijsolstr.2007.07.003
- ASME B&PV Code Committee, ASME B&PV Code, Sec. III, Appendices, Nonmandatory Appendix F, Rules for Evaluation of Service Loadings with Level, D Service Limits, 2019.
- B. Yoo, J.H. Lee, G.H. Koo, H.Y. Lee, J.B. Kim, Seismic base isolation technologies for Korea advanced liquid metal reactor, Nucl. Eng. Des. 199 (2000) 125-142. https://doi.org/10.1016/S0029-5493(99)00062-X
- J.B. Park, S.J. Lee, E.H. Lee, N.C. Park, Y.B. Kim, Seismic responses of nuclear reactor vessel internals considering coolant flow under operating conditions, Nucl. Eng. Technol. 51 (2019) 1658-1668. https://doi.org/10.1016/j.net.2019.04.013
- S.J. Lee, E.H. Lee, C.K. Lee, N.C. Park, Y.I. Choi, Investigation of seismic responses of reactor vessel and internals for beyond-design basis earthquake using elastoplastic time history analysis, Nucl. Eng. Technol. 53 (2021) 988-1003. https://doi.org/10.1016/j.net.2020.08.011
- ASME B&PV Code Committee, ASME B&PV Code, Sec. III, Appendices, Nonmandatory Appendix FF, Strain-Based Acceptance Criteria for EnergyLimited Events, 2019.
- S.D. Snow, D.K. Morton, E.L. Pleins, R. Keating, Strain-based acceptance criteria for energy-limited events, in: ASME Pressure Vessels and Piping Conference, 2009, pp. 26-30. Prague, Czech Republic, July.
- J.M. Seo, H.T. Kim, Y.J. Kim, H. Yamada, T. Kumagai, H. Tokunaga, N. Miura, Effect of strain rate and stress triaxiality on fracture strain of 304 stainless steels for canister impact simulation, Nucl. Eng. Technol. (2022). In Press.
- H. Tlilan, M. Gharaibeh, M. Mustafa, A. Jawarneh, Effect of stress triaxiality on the strain concentration factor, Int. J. Recent Technol. Eng. 8 (2020) 3468-3474.