Steel and Composite Structures

  • 제43권6호
  • /
  • Pages.785-796
  • /
  • 2022
  • /
  • 1229-9367(pISSN)
  • /
  • 1598-6233(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Shear strength prediction of concrete-encased steel beams based on compatible truss-arch model

  • Xue, Yicong (School of Civil Engineering, Xi'an University of Architecture & Technology) ;
  • Shang, Chongxin (School of Civil Engineering, Xi'an University of Architecture & Technology) ;
  • Yang, Yong (School of Civil Engineering, Xi'an University of Architecture & Technology) ;
  • Yu, Yunlong (School of Civil Engineering, Xi'an University of Architecture & Technology) ;
  • Wang, Zhanjie (New Era (Xi'an) Design Engineering Co., Ltd)
  • 투고 : 2021.08.28
  • 심사 : 2022.05.04
  • 발행 : 2022.06.25
⟨ 이전 논문 다음 논문 ⟩

초록

Concrete-encased steel (CES) beam, in which structural steel is encased in a reinforced concrete (RC) section, is widely applied in high-rise buildings as transfer beams due to its high load-carrying capacity, great stiffness, and good durability. However, these CES beams are prone to shear failure because of the low shear span-to-depth ratio and the heavy load. Due to the high load-carrying capacity and the brittle failure process of the shear failure, the accurate strength prediction of CES beams significantly influences the assessment of structural safety. In current design codes, design formulas for predicting the shear strength of CES beams are based on the so-called "superposition method". This method indicates that the shear strength of CES beams can be obtained by superposing the shear strengths of the RC part and the steel shape. Nevertheless, in some cases, this method yields errors on the unsafe side because the shear strengths of these two parts cannot be achieved simultaneously. This paper clarifies the conditions at which the superposition method does not hold true, and the shear strength of CES beams is investigated using a compatible truss-arch model. Considering the deformation compatibility between the steel shape and the RC part, the method to obtain the shear strength of CES beams is proposed. Finally, the proposed model is compared with other calculation methods from codes AISC 360 (USA, North America), Eurocode 4 (Europe), YB 9082 (China, Asia), JGJ 138 (China, Asia), and AS/NZS 2327 (Australia/New Zealand, Oceania) using the available test data consisting of 45 CES beams. The results indicate that the proposed model can predict the shear strength of CES beams with sufficient accuracy and safety. Without considering the deformation compatibility, the calculation methods from the codes AISC 360, Eurocode 4, YB 9082, JGJ 138, and AS/NZS 2327 lead to excessively conservative or unsafe predictions.

키워드

과제정보

This research is sponsored by the Key R&D Program of Shaanxi Province (Grant No. 2022SF-433), National Natural Science Foundation of China (Grant No. 52108172). The financial support is highly appreciated. In addition, the authors of the paper are members of the Youth Innovation Team of Shaanxi Universities (Grant No. 21JP063).

참고문헌

  1. AISC 360-16 (2016), Specification for Structural Steel Buildings, American Institute of Steel Construction; Chicago, IL, U.S.A.
  2. Anuntasena, W., Lenwari, A. and Thepchatri, T. (2020), "Axial compression behavior of concrete-encased cellular steel columns", J. Construct. Steel Res., 172, 106220. https://doi.org/10.1016/j.jcsr.2020.106220.
  3. ASCE/SEI 41-13 (2014), Seismic Evaluation and Retrofit of Existing Buildings (41-13), American Society of Civil Engineers, Reston, VA, U.S.A.
  4. AS/NZS 2327:2017 (2017), Composite Structures-Composite Steel-Concrete Construction in Buildings, Sydney, NSW, Australia.
  5. BS EN 1994-1-1:2004 (2004), Eurocode 4: Design of Composite Steel and Concrete Structures-Part 1-1: General Rules and Rules for Buildings, European Committee for Standardization, Belgium.
  6. Chen, C., Lin, K. and Chen, Y. (2018), "Behavior and shear strength of steel shape reinforced concrete deep beams", Eng. Struct., 175, 425-435. https://doi.org/10.1016/j.engstruct.2018.08.045.
  7. Chrzanowski, M., Odenbreit, C., Obiala, R., Bogdan, T. and Degee, H. (2021), "Effective bending stiffness of steel-concrete composite columns with multiple encased steel profiles", J. Construct. Steel Res., 181, 106607. https://doi.org/10.1016/j.jcsr.2021.106607.
  8. Deng, M., Ma, F., Ye, W. and Liang, X. (2018), "Investigation of the shear strength of HDC deep beams based on a modified direct strut-and-tie model", Construct. Build. Mater., 172, 340-348. https://doi.org/10.1016/j.conbuildmat.2018.03.274.
  9. Du, Y., Zhou, H., Jiang, J. and Liew J.Y.R. (2021), "Behaviour of ultra-high strength concrete encased steel columns subject to ISO-834 fire", Steel Compos. Struct., 38(2), 121-139. http://dx.doi.org/10.12989/scs.2021.38.2.121.
  10. Hwang, S. and Lee, H. (2002), "Strength prediction for discontinuity regions by softened strut-and-tie model", J. Struct. Eng., 128(12), 1519-1526. https://doi.org/10.1061/(ASCE)0733-9445(2002)128:12(1519).
  11. Ichinose, T. (1992), "A shear design equation for ductile R/C members", Earthq. Eng. Struct. Dyn., 21(3), 197-214. https://doi.org/10.1002/eqe.4290210302.
  12. Jeong, J. and Kim, W. (2014), "Shear resistant mechanism into base components: beam action and arch action in shear-critical RC members", Int. J. Concrete Struct. Mater., 8(1), 1-14. https://doi.org/10.1007/s40069-013-0064-x.
  13. JGJ 138-2016 (2016), Code for Design of Composite Structures, MoHURD, Beijing, China. (in Chinese)
  14. Kim, J.H. and Mander, J.B. (2007), "Influence of transverse reinforcement on elastic shear stiffness of cracked concrete elements", Eng. Struct., 29(8), 1798-1807. https://doi.org/10.1016/j.engstruct.2006.10.001.
  15. Lee, C.K., Khan, M.K.I., Zhang, Y.X. and Rana, M.M. (2020), "Engineered cementitious composites (ECC) encased concretesteel composite stub columns under concentric compression", Structures, 24, 386-399. https://doi.org/10.1016/j.istruc.2020.01.023
  16. Li, G., Hou, C., Han, L. and Shen, L. (2020), "Numerical study of concrete-encased CFST under preload followed by sustained service load", Steel Compos. Struct., 35(1), 93-109. http://dx.doi.org/10.12989/scs.2020.35.1.093.
  17. Khan, M.K.I., Lee, C.K. and Zhang, Y.X. (2020), "Numerical modelling of engineered cementitious composites-concrete encased steel composite columns", J. Construct. Steel Res., 170, 106082. https://doi.org/10.1016/j.jcsr.2020.106082.
  18. Lim, J.J., Kim, J.Y., Kim, J.W. and Eom, T.S. (2021), "Flexural tests of concrete-encased composite girders with high-strength steel angle", J. Construct. Steel Res., 182, 106650. https://doi.org/10.1016/j.jcsr.2021.106650.
  19. Lu, W. (2006), "Shear strength prediction for steel reinforced concrete deep beams", J. Construct. Steel Res., 62, 933-942. https://doi.org/10.1016/j.jcsr.2006.02.007.
  20. Pan, Z., Li, B. and Lu, Z. (2014), "Effective shear stiffness of diagonally cracked reinforced concrete beams", Eng. Struct., 59, 95-103. https://doi.org/10.1016/j.engstruct.2013.10.023.
  21. Pereira, M.F., Nardin, S.D. and Debs, A.L.H.C.EI. (2020), "Partially encased composite columns using fiber reinforced concrete: experimental study", Steel Compos. Struct., 34(6), 909-927. http://doi.org/10.12989/scs.2020.34.6.909.
  22. Thusoo, S., Obara, T., Kono, S and Miyahara K. (2021), "Design models for steel encased high-strength precast concrete piles under axial-flexural loads", Eng. Struct., 228, 111465. https://doi.org/10.1016/j.engstruct.2020.111465.
  23. Wu, C., Pan, Z., Kim, K. and Meng, S. (2017), "Theoretical and experimental study of effective shear stiffness of reinforced ECC columns", Int. J. Concrete Struct. Mater., 11(4), 585-597. https://doi.org/10.1007/s40069-017-0219-2.
  24. Xu, J., Chen, Z., Xue, J., Chen, Y. and Liu, Z. (2017), "A review of experimental results of steel reinforced recycled aggregate concrete members and structures in China (2010-2016)", Procedia Eng., 210, 109-119. https://doi.org/10.1016/j.proeng.2017.11.055.
  25. Yang, Y., Xue, Y. and Yu, Y. (2019), "Theoretical and experimental study on shear strength of precast steel reinforced concrete beam", Steel Compos. Struct., 32(4), 443-454. http://dx.doi.org/10.12989/scs.2019.32.4.443.
  26. Yao, D., Jia, J., Wu, F. and Yu, F. (2014), "Shear performance of pre-stressed ultra high strength concrete encased steel beams", Construct. Build. Mater., 52, 194-201. http://dx.doi.org/10.1016/j.conbuildmat.2013.11.006.
  27. YB 9082-2006 (2006), Technical Specification of Steel-Reinforced Concrete Structures, Metallurgical Industry Press; Beijing, China.
  28. Yu, Y., Yang, Y., Xue, Y. and Liu, Y. (2020), "Shear behavior and shear capacity prediction of precast concrete-encased steel beams", Steel Compos. Struct., 36(3), 261-272. http://dx.doi.org/10.12989/scs.2020.36.3.261.
  29. Zheng, S., Hu, Y., Che, S., Wang, B. and Tao, Q. (2011), "Experimental study on the shear capacity of SRHSHPC beams", Eng. Mech., 28(3), 129-135. http://dx.doi.org/1000-4750(2011)03-0129-07. 1000-4750(2011)03-0129-07