Acknowledgement
본 논문은 과학기술정보통신부의 재원으로 한국연구재단(NRF-2021M1A3B8077772, NRF-2021M1A3B9095872) 및 한국항공우주연구원(KARI-FR21C00)의 지원을 받아서 수행되었으며, 이에 감사드립니다.
References
- M. J. Casiano, J. R. Hulka and V. Yang, "Liquid-propellant rocket engine throttling: a comprehensive review", Journal of propulsion and power, Vol. 26, No. 5, 2010, pp. 897~923. https://doi.org/10.2514/1.49791
- G. A. Dressler, "Summary of deep throttling rocket engines with emphasis on Apollo LMDE", 42nd AIAA/ASME/SAE/ASEE Joint Propulsion Conference & Exhibit, 2006, pp. 5220.
- W. A. Tomazic, "Rocket-engine throttling", NACA, No. NACA-RM-E55J20, 1955.
- G. Morrell, "Rocket thrust variation with foamed liquid propellant", NACA, No. NACA-RM-E56K27, 1957.
- J. G. Rivard, "New techniques for throttleable bipropellant rocket engines", Propulsion Joint Specialist Conference, 1965, pp. 560.
- S. D. Sovani, P. E. Sojka and A. H. Lefebvre, "Effervescent atomization", Progress in Energy and Combustion Science, Vol. 27, No. 4, 2001, pp. 483~521. https://doi.org/10.1016/S0360-1285(00)00029-0
- W. Lee, D. Hwang, K. Ahn and Y. Yoon, "Spray characteristics of effervescent swirl injectors for variable thrust", Journal of the Korea Society of Propulsion Engineers, Vol. 23, No. 2, 2019, pp. 1~12.
- Y. Taitel, D. Barnea and A. E Dukler, "Modelling flow pattern transitions for steady upward gas-liquid flow in vertical tubes", AIChE Journal, Vol. 26, No. 3, 1980, pp. 345~354. https://doi.org/10.1002/aic.690260304
- P. Stahle, V. Gaukel and H. P. Schuchmann, "Influence of feed viscosity on the two-phase flow inside the exit orifice of an effervescent atomizer and on resulting spray characteristics", Food Research International, Vol. 77, 2015, pp. 55~62. https://doi.org/10.1016/j.foodres.2015.04.047
- R. C. Stechman, J. Oberstone and J. C. Howell, "Design criteria for film cooling small liquid-propellant rocket engines", Journal of Spacecraft and Rockets, Vol. 6, No. 2, 1969, pp. 97~102. https://doi.org/10.2514/3.29545
- A. H. Lefebvre, "Atomization and sprays", Taylor and Francis, 1989, pp. 155~199.
- A. Lichtarowicz, R. K. Duggins and E. Markland, "Discharge coefficient for incompressible non-cavitating flow through long orifices", Journal of Mechanical Engineering Science, Vol. 7, No. 2, 1965, pp. 210~219. https://doi.org/10.1243/JMES_JOUR_1965_007_029_02
- T. C. Roesler and A. H. Lefebvre, "Studies on aerated-liquid atomization", International Journal of Turbo and Jet Engines, Vol. 6, No. 3-4, 1989, pp. 221~230. https://doi.org/10.1515/TJJ.1989.6.3-4.221
- D. Chisholm, "Pressure gradients due to friction during the flow of evaporating two-phase mixtures in smooth tubes and channels", International Journal of Heat and Mass Transfer, Vol. 16, No. 2, 1973, pp. 347~358. https://doi.org/10.1016/0017-9310(73)90063-X
- M. A. Woldesemayat and A. J. Ghajar, "Comparison of void fraction correlations for different flow patterns in horizontal and upward inclined pipes", International Journal of Multiphase Flow, Vol. 33, No. 4, 2007, pp. 347~370. https://doi.org/10.1016/j.ijmultiphaseflow.2006.09.004
- D. Chisholm, "Void fraction during two-phase flow", Journal of Mechanical Engineering Science, Vol. 15, No. 3, 1973, pp. 235~236. https://doi.org/10.1243/JMES_JOUR_1973_015_040_02
- D. Chisholm, "Two-phase flow in heat exchangers and pipelines", Heat Transfer Engineering, Vol. 6, No. 2, 1985, pp. 48~57. https://doi.org/10.1080/01457638508939624
- W. Lee, Y. Yoon and K. Ahn, "A study on the thrust throttling using gas injection in swirl injectors", Journal of ILASS-Korea, Vol. 23, No. 4, 2018, pp. 159~168. https://doi.org/10.15435/JILASSKR.2018.23.4.159