Steel and Composite Structures

Techno-Press (테크노프레스)
권호 표지
DOI QR코드

DOI QR Code

Axisymmetric vibration analysis of a sandwich porous plate in thermal environment rested on Kerr foundation

  • Zhang, Zhe (Architectural Engineering Institute, Rizhao Polytechnic) ;
  • Yang, Qijian (Rizhao Tiantai Construction and Installation Engineering Co. LTD) ;
  • Jin, Cong (Architectural Engineering Institute, Rizhao Polytechnic)
  • Received : 2021.01.13
  • Accepted : 2022.05.09
  • Published : 2022.06.10
⟨ Previous Next ⟩

Abstract

The main objective of this research work is to investigate the free vibration behavior of annular sandwich plates resting on the Kerr foundation at thermal conditions. This sandwich configuration is composed of two FGM face sheets as coating layer and a porous GPLRC (GPL reinforced composite) core. It is supposed that the GPL nanofillers and the porosity coefficient vary continuously along the core thickness direction. To model closed-cell FG porous material reinforced with GPLs, Halpin-Tsai micromechanical modeling in conjunction with Gaussian-Random field scheme is used, while the Poisson's ratio and density are computed by the rule of mixtures. Besides, the material properties of two FGM face sheets change continuously through the thickness according to the power-law distribution. To capture fundamental frequencies of the annular sandwich plate resting on the Kerr foundation in a thermal environment, the analysis procedure is with the aid of Reddy's shear-deformation plate theory based high-order shear deformation plate theory (HSDT) to derive and solve the equations of motion and boundary conditions. The governing equations together with related boundary conditions are discretized using the generalized differential quadrature (GDQ) method in the spatial domain. Numerical results are compared with those published in the literature to examine the accuracy and validity of the present approach. A parametric solution for temperature variation across the thickness of the sandwich plate is employed taking into account the thermal conductivity, the inhomogeneity parameter, and the sandwich schemes. The numerical results indicate the influence of volume fraction index, GPLs volume fraction, porosity coefficient, three independent coefficients of Kerr elastic foundation, and temperature difference on the free vibration behavior of annular sandwich plate. This study provides essential information to engineers seeking innovative ways to promote composite structures in a practical way.

Keywords

References

  1. Aghababaei, R. and Reddy, J.N. (2009), "Nonlocal third-order shear deformation plate theory with application to bending and vibration of plates", J. Sound Vib., 326(1-2), 277-289. https://doi.org/10.1016/j.jsv.2009.04.044.
  2. Akbas, S.D. (2017), "Vibration and static analysis of functionally graded porous plates", J. Appl., 3(3), 199-207. https://doi.org/10.22055/jacm.2017.21540.1107.
  3. Amir, S., Arshid, E., Rasti-Alhosseini, S.M.A. and Loghman, A. (2020), "Quasi-3D tangential shear deformation theory for sizedependent free vibration analysis of three-layered FG porous micro rectangular plate integrated by nano-composite faces in hygrothermal environment", J. Therm. Stress., 43, 133-156. https://doi.org/10.1080/01495739.2019.1660601.
  4. Amir, S., Arshid, E. and Arani, M.R.G. (2019), "Size-dependent magneto-electro-elastic vibration analysis of FG saturated porous annular/circular micro sandwich plates embedded with nano-composite face sheets subjected to multi-physical pre loads", Smart Struct. Syst., 23(5), 429-447, https://doi.org/10.12989/sss.2019.23.5.429.
  5. Arshid, E. and Amir, S. (2021), "Size-dependent vibration analysis of fluid-infiltrated porous curved microbeams integrated with reinforced functionally graded graphene platelets face sheets considering thickness stretching effect", Proc. Inst. Mech. Eng. Part L, 235(5), https://doi.org/10.1177/1464420720985556.
  6. Arshid, E., Amir, S. and Loghman, A. (2021), "Bending and buckling behaviors of heterogeneous temperature-dependent micro annular/circular porous sandwich plates integrated by FGPEM nano-Composite layers", J. Sandw. Struct. Mater., 23(8), https://doi.org/10.1177/1099636220955027.
  7. Arshid, E., Amir, S. and Loghman, A. (2020), "Static and dynamic analyses of FG-GNPs reinforced porous nanocomposite annular micro-plates based on MSGT", Int. J. Mech. Sci., 180, https://doi.org/10.1016/j.ijmecsci.2020.105656
  8. Amir, S., Arshid, E., Khoddami Maraghi, Z., Loghman, A. and Arani, A.G. (2020), "Vibration analysis of magnetorheological fluid circular sandwich plates with magnetostrictive facesheets exposed to monotonic magnetic field located on visco-Pasternak substrate", J. Vib. Control., 26(17-18), 1523-1537. https://doi.org/10.1177/1077546319899203.
  9. Amir, S., Arshid, E. and Khoddami Maraghi, Z. (2020), "Free vibration analysis of magneto-rheological smart annular threelayered plates subjected to magnetic field in viscoelastic medium", Smart Struct. Syst., 25(5), 581-592. https://doi.org/10.12989/sss.2020.25.5.581.
  10. Arshid, E., Amir, S. and Loghman, A. (2021), "Thermal buckling analysis of FG graphene nanoplatelets reinforced porous nanocomposite MCST-based annular/circular microplates", Aerosp. Sci. Technol., 111, https://doi.org/10.1016/j.ast.2021.106561.
  11. Amir, S., Bidgoli, E.M.R. and Arshid, E. (2018), "Size-dependent vibration analysis of a three-layered porous rectangular nano plate with piezo-electromagnetic face sheets subjected to pre loads based on SSDT", Mech. Adv. Mater. Struc., 27(8), 605- 619. https://doi.org/10.1080/15376494.2018.1487612.
  12. Amir, S., Soleimani-Javid, Z. and Arshid, E. (2019), "Sizedependent free vibration of sandwich micro beam with porous core subjected to thermal load based on SSDBT", ZAMM Zeitschrift Fur Angew. Math. Und Mech., 99(9), 1-21, https://doi.org/10.1002/zamm.201800334.
  13. Arshid, E., Arshid, H., Amir, S. and Behnam Mousavi, S. (2021), "Free vibration and buckling analyses of FG porous sandwich curved microbeams in thermal environment under magnetic field based on modified couple stress theory", Archiv. Civ. Mech. Eng., 21(6), https://doi.org/10.1007/s43452-020-00150-x.
  14. Arshid, E. and Khorshidvand, A.R. (2018), "Free vibration analysis of saturated porous FG circular plates integrated with piezoelectric actuators via differential quadrature method", Thin-Walled Struct., 125, 220-233, https://doi.org/10.1016/j.tws.2018.01.007.
  15. Arshid, E., Khorasani, M., Soleimani-Javid, Z., Amir, S. and Tounsi, A. (2021), "Porosity-dependent vibration analysis of FG microplates embedded by polymeric nanocomposite patches considering hygrothermal effect via an innovative plate theory", Eng. Comput., 1-22, https://doi.org/10.1007/s00366-021-01382- y.
  16. Arshid, E., Khorshidvand, A.R. and S. Khorsandijou, S.M. (2019), "The effect of porosity on free vibration of SPFG circular plates resting on visco-Pasternak elastic foundation based on CPT, FSDT and TSDT", Struct. Eng. Mech., 70(1), 97-112, https://doi.org/10.12989/sem.2019.70.1.097.
  17. Arshid, E., Kiani, A., Amir, S. and Zarghami Dehaghani, M. (2019), "Asymmetric free vibration analysis of first-order shear deformable functionally graded magneto-electro-thermo-elastic circular plates", Proc. Inst. Mech. Eng. Part C, 233(16), 5659-5675, https://doi.org/10.1177/0954406219850598.
  18. Arshid, E., Kiani, A. and Amir, S. (2019), "Magneto-electro-elastic vibration of moderately thick FG annular plates subjected to multi physical loads in thermal environment using GDQ method by considering neutral surface", Proc. Inst. Mech. Eng. Part L, 233(10), 2140-2159, https://doi.org/10.1177/1464420719832626.
  19. Barati, M.R. (2017), "Dynamic response of porous functionally graded material nanobeams subjected to moving nanoparticle based on nonlocal strain gradient theory", Mater. Res. Express, 4(11). https://doi.org/10.1088/2053-1591/aa9765.
  20. Barati, M.R. and Zenkour, A.M. (2018), "Electro-thermoelastic vibration of plates made of porous functionally graded piezoelectric materials under various boundary conditions", J. Vib. Control., 24(10), 1910-1926. https://doi.org/10.1177/1077546316672788.
  21. Barati, M.R. and Zenkour, A.M. (2019), "Vibration analysis of functionally graded graphene platelet reinforced cylindrical shells with different porosity distributions", Mech. Adv. Mater. Struct., 26(18), 1580-1588. https://doi.org/10.1080/15376494.2018.1444235.
  22. Barati, M.R. and Zenkour, AM. (2017), "Investigating postbuckling of geometrically imperfect metal foam nanobeams with symmetric and asymmetric porosity distributions", Compos. Struct., 182, 91-98. https://doi.org/10.1016/j.compstruct.2017.09.008.
  23. Bennai, R., Ait Atmane, H. and Tounsi, A. (2015), "A new higherorder shear and normal deformation theory for functionally graded sandwich beams", Steel Compos. Struct., 19(3), 521-546. http://dx.doi.org/10.12989/scs.2015.19.3.521.
  24. Biot, M.A. (1964), "Theory of buckling of a porous slab and its thermoelastic analogy", J. Appl. Mech., 31, 194-198. https://doi.org/10.1115/1.3629586
  25. Bolton, J.S., Shiau, N.M. and Kang, Y.J. (1996), "Sound transmission through multi-panel structures lined with elastic porous materials", J. Sound Vib., 191(3), 317-347. https://doi.org/10.1006/jsvi.1996.0125.
  26. Bouchafa, A., Bouiadjra, M.B., Houari, M.S.A. and Tounsi, A. (2015), "Thermal stresses and deflections of functionally graded sandwich plates using a new refined hyperbolic shear deformation theory", Steel Compos. Struct., 18(6), 1493-1515. https://doi.org/10.12989/scs.2015.18.6.1493.
  27. Chen, C.S., Liu, F.H. and Chen, W.R. (2017), "Vibration and stability of initially stressed sandwich plates with FGM face sheets in thermal environments", Steel Compos. Struct., 23(3), 251-261. http://dx.doi.org/10.12989/scs.2017.23.3.251.
  28. Chen, D., Yang, J. and Kitipornchai, S. (2016), "Free and forced vibrations of shear deformable functionally graded porous beams", Int. J. Mech. Sci., 108, 14-22. https://doi.org/10.1016/j.ijmecsci.2016.01.025.
  29. Daikh, A., Ahmed Houari, M.S. and Tounsi, A. (2019), "Buckling analysis of porous FGM sandwich nanoplates due to heat conduction via nonlocal strain gradient theory", Eng. Res. Express, 1.
  30. DaikhA, A. and Megueni, A. (2018), "Thermal buckling analysis of functionally graded sandwich plates", J. Therm. Stresses, 41, 139-145. https://doi.org/10.1080/01495739.2017.1393644
  31. Detournay, E. and Cheng, A.H.D. (1993), "Fundamentals of poroelasticity. In: Analysis and design methods", Pergamon Press, 113-171.
  32. Dong Y, Li, X., Gao, K., Li, Y. and Yang, J. (2019), "Harmonic resonances of graphene-reinforced nonlinear cylindrical shells: effects of spinning motion and thermal environment", Nonlinear Dyn., 981-1000. https://doi.org/10.1007/s11071-019-05297-8.
  33. Eyvazian, A., Hamouda, A.M., Tarlochan, F., Mohsenizadeh, S. and Ahmadi Dastjerdi, A. (2019), "Damping and vibration response of viscoelastic smart sandwich plate reinforced with non-uniform Graphene platelet with magnetorheological fluid core", Steel Compos. Struct., 33(6), 891-906. http://dx.doi.org/10.12989/scs.2019.33.6.891.
  34. Finot, M. and Suresh, S. (1996), "Small and large deformation of thick and thin-film multilayers: Effect of layer geometry, plasticity and compositional gradients", J. Mech. Phys. Solids, 44(5), 683-721. https://doi.org/10.1016/0022-5096(96)84548-0.
  35. Han, J.B. and Liew, K.M. (1999), "Axisymmetric free vibration of thick annular plates", Int. J. Mech. Sci., 41(9), 1089-1109. https://doi.org/10.1016/S0020-7403(98)00057-5.
  36. Kerr, A.D. (1965), "A study of a new foundation model", Acta Mechanica 1/2, 135-147. https://doi.org/10.1007/BF01174308
  37. Kettaf, F.Z., Houari, M.S.A., Benguediab, M. and Tounsi, A. (2013), "Thermal buckling of functionally graded sandwich plates using a new hyperbolic shear displacement model", Steel Compos. Struct., 15(4), 399-423. http://dx.doi.org/10.12989/scs.2013.15.4.399.
  38. Khare, S. and Mittal, N. (2015), "Free vibration analysis of thin circular and annular plate with general boundary conditions", Eng. Solid Mech., 3(4), 245-252. https://doi.org/10.5267/j.esm.2015.6.002.
  39. Khorasani, M., Soleimani-Javid, Z., Arshid, E., Lampani, L. and Civaleke, O. (2020), "Thermo-elastic buckling of honeycomb micro plates integrated with FG-GNPs reinforced Epoxy skins with stretching effect", Compos. Struct., 258, https://doi.org/10.1016/j.compstruct.2020.113430.
  40. Kim, C.S. and Dickinson, S.M. (1989), "On the free, transverse vibration of annular and circular, thin, sectorial plates subjected to certain complicating effects", J. Sound Vib., 134(3), 407-421. https://doi.org/10.1016/0022-460X(89)90566-X.
  41. Koizumi, M. (1993), "The concept of FGM", Ceram. Trans. Funct. Grad. Mater., 34, 3-10.
  42. Liew, K.M. and Lam, K.Y. (1993), "On the use of 2-d orthogonal polynomials in the Rayleigh-Ritz method for flexural vibration of annular sector plates of arbitrary shape", Int. J. Mech. Sci., 35(2), 129-139. https://doi.org/10.1016/0020-7403(93)90071-2.
  43. Li, K., Wu, D., Chen, X., Cheng, J., Zhenyu, L., Gao, W. and Muyu, L. (2018), "Isogeometric Analysis of functionally graded porous plates reinforced by graphene platelets", Compos. Struct., 204, 114-130, https://doi.org/10.1016/j.compstruct.2018.07.059.
  44. Marin, M. and Florea, O. (2014), "On temporal behaviour of solutions in thermoelasticity of porous micropolar bodies", St. Univ. Ovidius Constanta, 22(1), 169-188. https://doi.org/ 10.2478/auom-2014-0014.
  45. Marin, M., Agarwal, R.P. and Mahmoud, S.R. (2013), "Nonsimple material problems addressed by the Lagrange's identity", Bound. Value Probl., 135. https://doi.org/10.1186/1687-2770-2013-135.
  46. Mirjavadi, S.S., Forsat, M. and Hamouda, A. (2019), "Dynamic response of functionally graded graphene nanoplatelet reinforced shells with porosity distributions under transverse dynamic loads", Mater. Res. Express., 6(7), 075045. https://doi.org/10.1088/2053-1591/ab1552
  47. Mohammadimehr, M., Arshid, E., Alhosseini, S.M.A.R., Amir, S. and Arani, M.R.G. (2019), "Free vibration analysis of thick cylindrical MEE composite shells reinforced CNTs with temperature-dependent properties resting on viscoelastic foundation", Struct. Eng. Mech., 70(6), 683-702, https://doi.org/10.12989/sem.2019.70.6.683.
  48. Mojahedin, A., Jabbari, M. and Khorshidvand, A.R. (2016), "Buckling analysis of functionally graded circular plates made of saturated porous materials based on higher order shear deformation theory", Thin-Walled Struct., 99, 83-90. https://doi.org/10.1016/j.tws.2015.11.008.
  49. Mousavi, S.B., Amir, S., Jafari, A. and Arshid, E. (2021), "Analytical solution for analyzing initial curvature effect on vibrational behavior of PM beams integrated with FGP layers based on trigonometric theories", Adv. Nano Res., 10(3), 235-251, https://doi.org/10.12989/anr.2021.10.3.235.
  50. Mukhopadhyay, M. (1979), "A semi-analytic solution for free vibration of annular sector plates", J. Sound Vib., 63(1), 87-95. https://doi.org/10.1016/0022-460X(79)90379-1.
  51. Mukhopadhyay, M. (1982), "Free vibration of annular sector plates with edges possessing different degrees of rotational restraints", J. Sound Vib., 1982; 80(2), 275-279. https://doi.org/10.1016/0022-460X(82)90196-1.
  52. Pasternak, P.L. (1954), "On a new method of analysis of an elastic foundation by means of two-constants", Gosudarstvennoe Izdatelstvo Literaturi po Stroitelstvu I Arkhitekture, Moscow, USSR
  53. Rafiee, M.A., Rafiee J., Wang, Z., Song, H., Yu, Z.Z. and Koratkar, N. (2009), "Enhanced mechanical properties of nanocomposites at low graphene content", ACS Nano, 3(12), 3884-3890. https://doi.org/10.1021/nn9010472
  54. Rajabi, J. and Mohammadimehr, M. (2019), "Hydro-thermomechanical biaxial buckling analysis of sandwich micro-plate with isotropic/orthotropic cores and piezoelectric/polymeric nanocomposite face sheets based on FSDT on elastic foundations", Steel Compos. Struct., 33(4), 509-523. https://doi.org/10.12989/scs.2019.33.4.509.
  55. Rashad, M. and Yang, T.Y. (2018), "Numerical study of steel sandwich plates with RPF and VR cores materials under free air blast loads", Steel Compos. Struct., 27(6), 717-725. https://doi.org/10.12989/scs.2018.27.6.717.
  56. Safarpour, M., Rahimi, A., Noormohammadi Arani, O. and Rabczuk, T. (2020), "Frequency characteristics of multiscale hybrid nanocomposite annular plate based on a Halpin-Tsai Homogenization Model with the aid of GDQM", Appl. Sci., 10(4), 1412. https://doi.org/10.3390/app10041412.
  57. Sahla, M., Saidi, H., Draiche, K., Bousahla, A.A., Bourada, F. and Tounsi, A. (2019), "Free vibration analysis of angle-ply laminated composite and soft core sandwich plates", Steel Compos. Struct., 33(5), 663-679. http://dx.doi.org/10.12989/scs.2019.33.5.663.
  58. Saidi, H., Houari, M.S.A., Tounsi, A. and Bedia, E.A. (2013), "Thermo-mechanical bending response with stretching effect of functionally graded sandwich plates using a novel shear deformation theory", Steel Compos. Struct., 15(2), 221-245. http://dx.doi.org/10.12989/scs.2013.15.2.221.
  59. Sharma, A., Sharda, H.B. and Nath, Y. (2005a), "Stability and vibration of Mindlin sector plates: an analytical approach", AIAA J., 43(5), 1109-1116. https://doi.org/10.2514/1.4683.
  60. Sharma, A., Sharda, H.B. and Nath, Y. (2005b), "Stability and vibration of thick laminated composite sector plates", J. Sound Vib., 287(1-2), 1-23. https://doi.org/10.1016/j.jsv.2004.10.030.
  61. Sharma, K. and Marin, M. (2013), "Effect of distinct conductive a thermodynamic temperatures on the reflection of plane waves in micropolar elastic half-space", Scientific Bull., Series A Appl. Mathem. Phys., 75(2), 121-132.
  62. Tahouneh, V. (2016), "Using an equivalent continuum model for 3D dynamic analysis of nanocomposite plates", Steel Compos. Struct., 20(3), 623-649. https://doi.org/10.12989/scs.2016.20.3.623.
  63. Tahouneh, V. (2017a), "Effects of CNTs waviness and aspect ratio on vibrational response of FG-sector plate", Steel Compos. Struct., 25(6), 649-661. http://dx.doi.org/10.12989/scs.2017.25.6.649.
  64. Tahouneh, V. (2017b), "The effect of carbon nanotubes agglomeration on vibrational response of thick functionally graded sandwich plates", Steel Compos. Struct., 24(6), 711-726. http://dx.doi.org/10.12989/scs.2017.24.6.711.
  65. Tahouneh, V. (2018), "3-D Vibration analysis of FGMWCNTs/ Phenolic sandwich sectorial plates", Steel Compos. Struct., 26(5), 649-662. http://dx.doi.org/10.12989/scs.2018.26.5.649.
  66. Tahouneh, V. and Yas, M.H. (2014), "Semianalytical solution for three-dimensional vibration analysis of thick multidirectional functionally graded annular sector plates under various boundary conditions", J. Eng. Mech., 140(1), https://doi.org/10.1061/(ASCE)EM.1943-7889.0000653.
  67. Tahouneh, V., Naei, M.H. and Mosavi Mashhadi, M. (2020a), "Influence of vacancy defects on vibration analysis of graphene sheets applying isogeometric method: Molecular and continuum approaches", Steel Compos. Struct., 34(2), 261-277. http://dx.doi.org/10.12989/scs.2020.34.2.261.
  68. Tahouneh, V., Naei, M.H. and Mosavi Mashhadi, M. (2020b), "Using IGA and trimming approaches for vibrational analysis of L-shape graphene sheets via nonlocal elasticity theory", Steel Compos. Struct., 33(5), 717-727. http://dx.doi.org/10.12989/scs.2019.33.5.717.
  69. Tanahashi, M. (2010), "Development of fabrication methods of filler/polymer nanocomposites: With focus on simple meltcompounding-based approach without surface modification of nanofillers", Materials, 3, https://doi.org/10.3390/ma3031593.
  70. Tornabene F, Fantuzzi N, Ubertini F and Viola E. (2015), Strong formulation finite element method based on differential quadrature: A survey", Appl. Mech. Rev., 67, 1-55.
  71. Tornabene, F. and Viola, E. (2008), "2-D solution for free vibrations of parabolic shells using generalized differential quadrature method", Eur. J. Mech., 27(6), 1001-1025. https://doi.org/10.1016/j.euromechsol.2007.12.007.
  72. Tornabene, F., Fantuzzi, N. and Bacciocchi, M. (2017), "Foam core composite sandwich plates and shells with variable stiffness: Effect of the curvilinear fiber path on the modal response", J. Sandw. Struct. Mater., 21(1), 320-365. https://doi.org/10.1177%2F1099636217693623. https://doi.org/10.1177%2F1099636217693623
  73. Tornabene, F., Fantuzzi, N. and Bacciocchi, M. (2017), "Linear static response of nanocomposite plates and shells reinforced by agglomerated carbon nanotubes", Compos. Part B., 115, 449- 476. https://doi.org/10.1016/j.compositesb.2016.07.011.
  74. Tornabene, F., Fantuzzi, N. and Bacciocchi, M. (2019), "Refined shear deformation theories for laminated composite arches and beams with variable thickness, Natural frequency analysis", Eng. Anal. Bound. Elem., 100, 24-47. https://doi.org/10.1016/j.enganabound.2017.07.029.
  75. Tornabene, F., Fantuzzi, N., Bacciocchi, M. and Viola, E. (2016), "Effect of agglomeration on the natural frequencies of functionally graded carbon nanotube-reinforced laminated composite doubly-curved shells", Compos. Part B, 89, 187-218. https://doi.org/10.1016/j.compositesb.2015.11.016.
  76. Wang, Y.Q. (2018), "Electro-mechanical vibration analysis of functionally graded piezoelectric porous plates in the translation state", Acta Astronaut., 143, 263-271. https://doi.org/10.1016/j.actaastro.2017.12.004.
  77. Wang, Y.Q., Ye, C. and Zu, J.W. (2019), "Vibration analysis of circular cylindrical shells made of metal foams under various boundary conditions", Int. J. Mech. Mater. Des., 15, 333-344. https://doi.org/10.1007/s10999-018-9415-8.
  78. Wattanasakulpong, N., Chaikittiratana, A. and Pornpeerakeat, S. (2018), "Chebyshev collocation approach for vibration analysis of functionally graded porous beams based on third-order shear deformation theory", Acta Mech Sinica, 34, 1124-1135. https://doi.org/10.1007/s10409-018-0770-3.
  79. Wu, C.P. and Liu, Y.C. (2016), "A state space meshless method for the 3D analysis of FGM axisymmetric circular plates", Steel Compos. Struct., 22(1), 161-182. http://dx.doi.org/10.12989/scs.2016.22.1.161.
  80. Yang, J., Chen, D. and Kitipornchai, S. (2018), "Buckling and free vibration analyses of functionally graded graphene reinforced porous nanocomposite plates based on Chebyshev-Ritz method", Compos. Struct., 193, 281-294. https://doi.org/10.1016/j.compstruct.2018.03.090.
  81. Zenkour, A.M. (2018), "A quasi-3D refined theory for functionally graded single-layered and sandwich plates with porosities", Compos. Struct., 201, 38-48. https://doi.org/10.1016/j.compstruct.2018.05.147.
  82. Zhu, X.H. and Meng, Z.Y. (1995), "Operational principle fabrication and displacement characteristics of a functionally gradient piezoelectricceramic actuator", Sens. Actuators, 48(3), 169-176. https://doi.org/10.1016/0924-4247(95)00996-5.