Structural Engineering and Mechanics

  • 제83권6호
  • /
  • Pages.835-851
  • /
  • 2022
  • /
  • 1225-4568(pISSN)
  • /
  • 1598-6217(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Analysis on lateral vibration characteristics of the deep-sea mining pipe

  • Xiao, Linjing (College of Mechanical & Electronic Engineering, Shandong University of Science and Technology) ;
  • Liu, Qiang (College of Mechanical & Electronic Engineering, Shandong University of Science and Technology)
  • 투고 : 2021.06.19
  • 심사 : 2022.08.23
  • 발행 : 2022.09.25
⟨ 이전 논문 다음 논문 ⟩

초록

This paper analyzes the variation law of the pipe lateral vibration characteristics, it was treated as a beam model, and was dispersed into several subunits based on the FEM. The corresponding stiffness and mass matrix of the pipe was deduced by using Hermite interpolation function, and the overall dynamic balance equation was established. The lateral vibration under different pipe lengths, thicknesses and towing speeds are solved by integral method. The results show that the pipe vibration trend decreases first and then increases, and the vibration value at the ore bin is larger than that at the pump set, and the value at the top is the largest, and the least value location can change with the length increase. Increasing length and thickness can reduce lateral vibration value, while increasing speed can increase the value. Neither the thickness nor the towing speed will change the location where the least value occurs. The vibration intensity will increase with the decrease of pipe length and thickness and the increase of towing speed.

키워드

과제정보

This work was supported by the National Natural Science Foundation of China (allotment grant number 51774193), and the Shandong Provincial Natural Science Foundation, China (allotment grant number ZR2017MEE025).

참고문헌

  1. Adamian, A., Safari, K.H., Sheikholeslami, M., Habibi, M., AlFurjan, M. and Chen, G. (2020), "Critical temperature and frequency characteristics of gpls-reinforced composite doubly curved panel", Appl. Sci., 10(9), 3251. https://doi.org/10.3390/app10093251.
  2. Al-Furjan, M., Dehini, R., Khorami, M., Habibi, M. and won Jung, D. (2020a), "On the dynamics of the ultra-fast rotating cantilever orthotropic piezoelectric nanodisk based on nonlocal strain gradient theory", Compos. Struct., 255, 112990. https://doi.org/10.1016/j.compstruct.2020.112990.
  3. Al-Furjan, M., Fereidouni, M., Habibi, M., Abd Ali, R., Ni, J. and Safarpour, M. (2020b), "Influence of in-plane loading on the vibrations of the fully symmetric mechanical systems via dynamic simulation and generalized differential quadrature framework", Eng. Comput., 1-23. https://doi.org/10.1007/s00366-020-01177-7.
  4. Al-Furjan, M., Fereidouni, M., Sedghiyan, D., Habibi, M. and won Jung, D. (2020c), "Three-dimensional frequency response of the CNT-Carbon-Fiber reinforced laminated circular/annular plates under initially stresses", Compos. Struct., 257, 113146. https://doi.org/10.1016/j.compstruct.2020.113146.
  5. Al-Furjan, M., Habibi, M., won Jung, D. and Safarpour, H. (2020d), "Vibrational characteristics of a higher-order laminated composite viscoelastic annular microplate via modified couple stress theory", Compos. Struct., 257, 113152. https://doi.org/10.1016/j.compstruct.2020.113152.
  6. Al-Furjan, M., Moghadam, S.A., Dehini, R., Shan, L., Habibi, M. and Safarpour, H. (2020e), "Vibration control of a smart shell reinforced by graphene nanoplatelets under external load: Seminumerical and finite element modeling", Thin Wall. Struct., 159, 107242. https://doi.org/10.1016/j.tws.2020.107242.
  7. Al-Furjan, M., Oyarhossein, M.A., Habibi, M., Safarpour, H. and Jung, D.W. (2020f), "Frequency and critical angular velocity characteristics of rotary laminated cantilever microdisk via twodimensional analysis", Thin Wall. Struct., 157, 107111. https://doi.org/10.1016/j.tws.2020.107111.
  8. Alipour, M., Torabi, M.A., Sareban, M., Lashini, H., Sadeghi, E., Fazaeli, A., Habibi, M. and Hashemi, R. (2020), "Finite element and experimental method for analyzing the effects of martensite morphologies on the formability of DP steels", Mech. Bas. Des. Struct. Mach., 48(5), 525-541. https://doi.org/10.1080/15397734.2019.1633343.
  9. Bai, Y., Alzahrani, B., Baharom, S. and Habibi, M. (2020), "Seminumerical simulation for vibrational responses of the viscoelastic imperfect annular system with honeycomb core under residual pressure", Eng. Comput., 1-26. https://doi.org/10.1007/s00366-020-01191-9.
  10. Boresi, A.P., Schmidt, R.J. and Sidebottom, O.M. (1985), Advanced Mechanics of Materials, Wiley, New York.
  11. Budnik, V. and Chernyi, S. (2016), "Future development of the world ocean mining for the industry", Procedia Eng., 150, 2150-2156. https://doi.org/10.1016/j.proeng.2016.07.256.
  12. Chen, F., Chen, J., Duan, R., Habibi, M. and Khadimallah, M.A. (2022), "Investigation on dynamic stability and aeroelastic characteristics of composite curved pipes with any yawed angle", Compos. Struct., 284, 115195. https://doi.org/10.1016/j.compstruct.2022.115195.
  13. Chen, J., Du, L. and Guo, Y. (2021), "Label constrained convolutional factor analysis for classification with limited training samples", Inform. Sci., 544, 372-394. https://doi.org/10.1016/j.ins.2020.08.048.
  14. Cheshmeh, E., Karbon, M., Eyvazian, A., Jung, D.w., Habibi, M. and Safarpour, M. (2020), "Buckling and vibration analysis of FG-CNTRC plate subjected to thermo-mechanical load based on higher order shear deformation theory", Mech. Bas. Des. Struct. Mach., 50(4), 1-24. https://doi.org/10.1080/15397734.2020.1744005.
  15. Chung, J.S., Cheng, B.R. and Huttelmaier, H. (1994), "Threedimensional coupled responses of a vertical deep-ocean pipe: Part I. excitation at pipe ends and external torsion", Int. J. Offsh. Polar Eng., 4(04), Paper Number: ISOPE-94-04-4-320. https://doi.org/10.1080/10641199809379971.
  16. Dai, Y., Li, X., Yin, W., Huang, Z. and Xie, Y. (2021a), "Dynamics analysis of deep-sea mining pipeline system considering both internal and external flow", Marine Geores. Geotechnol., 39(4), 408-418. https://doi.org/10.1080/1064119X.2019.1708517.
  17. Dai, Z., Jiang, Z., Zhang, L. and Habibi, M. (2021b), "Frequency characteristics and sensitivity analysis of a size-dependent laminated nanoshell", Adv. Nano Res., 10(2), 175. https://doi.org/10.12989/anr.2021.10.2.175.
  18. Dai, Z., Zhang, L., Bolandi, S.Y. and Habibi, M. (2021c), "On the vibrations of the non-polynomial viscoelastic composite opentype shell under residual stresses", Compos. Struct., 263, 113599. https://doi.org/10.1016/j.compstruct.2021.113599.
  19. Dong, J., Deng, R., Quanying, Z., Cai, J., Ding, Y. and Li, M. (2021), "Research on recognition of gas saturation in sandstone reservoir based on capture mode", Appl. Radiat. Isotop., 178, 109939. https://doi.org/10.1016/j.apradiso.2021.109939.
  20. Dong, Y., Gao, Y., Zhu, Q., Moradi, Z. and Safa, M. (2022), "TEGDQE implementation to investigate the vibration of FG composite conical shells considering a frequency controller solid ring", Eng. Anal. Bound Elem., 138, 95-107. https://doi.org/10.1016/j.enganabound.2022.01.017.
  21. Ebrahimi, F., Habibi, M. and Safarpour, H. (2019a), "On modeling of wave propagation in a thermally affected GNP-reinforced imperfect nanocomposite shell", Eng. Comput., 35(4), 1375-1389. https://doi.org/10.1007/s00366-018-0669-4.
  22. Ebrahimi, F., Hajilak, Z.E., Habibi, M. and Safarpour, H. (2019b), "Buckling and vibration characteristics of a carbon nanotubereinforced spinning cantilever cylindrical 3D shell conveying viscous fluid flow and carrying spring-mass systems under various temperature distributions", Proc. Inst. Mech. Eng., Part C: J. Mech. Eng. Sci., 233(13), 4590-4605. https://doi.org/10.1177/0954406219832323
  23. Ebrahimi, F., Hashemabadi, D., Habibi, M. and Safarpour, H. (2020a), "Thermal buckling and forced vibration characteristics of a porous GNP reinforced nanocomposite cylindrical shell", Microsyst. Technol., 26(2), 461-473. https://doi.org/10.1007/s00542-019-04542-9.
  24. Ebrahimi, F., Mohammadi, K., Barouti, M.M. and Habibi, M. (2019c), "Wave propagation analysis of a spinning porous graphene nanoplatelet-reinforced nanoshell", Wave. Random Complex Media, 31(6), 1-27. https://doi.org/10.1080/17455030.2019.1694729.
  25. Ebrahimi, F., Supeni, E.E.B., Habibi, M. and Safarpour, H. (2020b), "Frequency characteristics of a GPL-reinforced composite microdisk coupled with a piezoelectric layer", Eur. Phys. J. Plus, 135(2), 144. https://doi.org/10.1140/epjp/s13360-020-00217-x.
  26. Esmailpoor Hajilak, Z., Pourghader, J., Hashemabadi, D., Sharifi Bagh, F., Habibi, M. and Safarpour, H. (2019), "Multilayer GPLRC composite cylindrical nanoshell using modified strain gradient theory", Mech. Bas. Des. Struct. Mach., 47(5), 521-545. https://doi.org/10.1080/15397734.2019.1566743.
  27. Fan, C., Li, H., Qin, Q., He, S. and Zhong, C. (2020), "Geological conditions and exploration potential of shale gas reservoir in Wufeng and Longmaxi Formation of southeastern Sichuan Basin, China", J. Petrol. Sci. Eng., 191, 107138. https://doi.org/10.1016/j.petrol.2020.107138.
  28. Fan, L., Huang, Y., Ji, D., Moradi, Z., Safa, M. and Amine Khadimallah, M. (2022), "Interaction of angular velocity and temperature rise in the thermo-inertia bifurcation buckling of FG laminated nanocomposite annular plates", Eng. Struct., 265, 114518. https://doi.org/10.1016/j.engstruct.2022.114518.
  29. Gao, N., Zhang, Z., Deng, J., Guo, X., Cheng, B. and Hou, H. (2022), "Acoustic metamaterials for noise reduction: A review", Adv. Mater. Technol., 7(6), 2100698. https://doi.org/10.1002/admt.202100698.
  30. Ghazanfari, A., Soleimani, S.S., Keshavarzzadeh, M., Habibi, M., Assempuor, A. and Hashemi, R. (2020), "Prediction of FLD for sheet metal by considering through-thickness shear stresses", Mech. Bas. Des. Struct. Mach., 48(6), 755-772. https://doi.org/10.1080/15397734.2019.1662310.
  31. Gong, X., Wang, L., Mou, Y., Wang, H., Wei, X., Zheng, W. and Yin, L. (2022), "Improved Four-channel PBTDPA control strategy using force feedback bilateral teleoperation system", Int. J. Control Autom. Syst., 20(3), 1002-1017. https://doi.org/10.1007/s12555-021-0096-y.
  32. Guo, J., Baharvand, A., Tazeddinova, D., Habibi, M., Safarpour, H., Roco-Videla, A. and Selmi, A. (2021a), "An intelligent computer method for vibration responses of the spinning multilayer symmetric nanosystem using multi-physics modeling", Eng. Comput., 1-22. https://doi.org/10.1007/s00366-021-01433-4.
  33. Guo, Y., Mi, H. and Habibi, M. (2021b), "Electromechanical energy absorption, resonance frequency, and low-velocity impact analysis of the piezoelectric doubly curved system", Mech. Syst. Signal Pr., 157, 107723. https://doi.org/10.1016/j.ymssp.2021.107723.
  34. Habibi, M., Darabi, R., Sa, J.C.d. and Reis, A. (2021), "An innovation in finite element simulation via crystal plasticity assessment of grain morphology effect on sheet metal formability", Proc. Inst. Mech. Eng., Part L: J. Mater.: Des. Appl., 235(8), 1937-1951. https://doi.org/10.1177/14644207211024686.
  35. Habibi, M., Ghazanfari, A., Assempour, A., Naghdabadi, R. and Hashemi, R. (2017), "Determination of forming limit diagram using two modified finite element models", Mech Eng., 48(4), 141-144. https://doi.org/10.22060/MEJ.2016.664.
  36. Habibi, M., Hashemabadi, D. and Safarpour, H. (2019a), "Vibration analysis of a high-speed rotating GPLRC nanostructure coupled with a piezoelectric actuator", Eur. Phys. J. Plus, 134(6), 307. https://doi.org/10.1140/epjp/i2019-12742-7.
  37. Habibi, M., Hashemi, R., Ghazanfari, A., Naghdabadi, R. and Assempour, A. (2018a), "Forming limit diagrams by including the M-K model in finite element simulation considering the effect of bending", Proc. Inst. Mech. Eng., Part L: J. Mater.: Des. Appl., 232(8), 625-636. https://doi.org/10.1177/1464420716642258.
  38. Habibi, M., Hashemi, R., Sadeghi, E., Fazaeli, A., Ghazanfari, A. and Lashini, H. (2016), "Enhancing the mechanical properties and formability of low carbon steel with dual-phase microstructures", J. Mater. Eng. Perform., 25(2), 382-389. https://doi.org/10.1007/s11665-016-1882-1.
  39. Habibi, M., Hashemi, R., Tafti, M.F. and Assempour, A. (2018b), "Experimental investigation of mechanical properties, formability and forming limit diagrams for tailor-welded blanks produced by friction stir welding", J. Manuf. Proc., 31, 310-323. https://doi.org/10.1016/j.jmapro.2017.11.009.
  40. Habibi, M., Mohammadgholiha, M. and Safarpour, H. (2019b), "Wave propagation characteristics of the electrically GNPreinforced nanocomposite cylindrical shell", J. Brazil. Soc. Mech. Sci. Eng., 41(5), 221. https://doi.org/10.1007/s40430-019-1715-x.
  41. Habibi, M., Mohammadi, A., Safarpour, H. and Ghadiri, M. (2019c), "Effect of porosity on buckling and vibrational characteristics of the imperfect GPLRC composite nanoshell", Mech. Bas. Des. Struct. Mach., 49(6), 811-840. https://doi.org/10.1080/15397734.2019.1701490.
  42. Habibi, M., Mohammadi, A., Safarpour, H., Shavalipour, A. and Ghadiri, M. (2019d), "Wave propagation analysis of the laminated cylindrical nanoshell coupled with a piezoelectric actuator", Mech. Bas. Des. Struct. Mach., 49(5), 640-658. https://doi.org/10.1080/15397734.2019.1697932.
  43. Habibi, M., Safarpour, M. and Safarpour, H. (2020), "Vibrational characteristics of a FG-GPLRC viscoelastic thick annular plate using fourth-order Runge-Kutta and GDQ methods", Mech. Bas. Des. Struct. Mach., 50(7), 2471-2492. https://doi.org/10.1080/15397734.2020.1779086.
  44. Habibi, M., Taghdir, A. and Safarpour, H. (2019e), "Stability analysis of an electrically cylindrical nanoshell reinforced with graphene nanoplatelets", Compos. Part B: Eng., 175, 107125. https://doi.org/10.1016/j.compositesb.2019.107125.
  45. Hashemi, H.R., Alizadeh, A.a., Oyarhossein, M.A., Shavalipour, A., Makkiabadi, M. and Habibi, M. (2019), "Influence of imperfection on amplitude and resonance frequency of a reinforcement compositionally graded nanostructure", Wave. Random Complex Media, 31(6), 1340-1366. https://doi.org/10.1080/17455030.2019.1662968.
  46. He, X., Ding, J., Habibi, M., Safarpour, H. and Safarpour, M. (2021), "Non-polynomial framework for bending responses of the multi-scale hybrid laminated nanocomposite reinforced circular/annular plate", Thin Wall. Struct., 166, 108019. https://doi.org/10.1016/j.tws.2021.108019.
  47. Hou, F., Wu, S., Moradi, Z. and Shafiei, N. (2021), "The computational modeling for the static analysis of axially functionally graded micro-cylindrical imperfect beam applying the computer simulation", Eng. Comput., 1-19. https://doi.org/10.1007/s00366-021-01456-x.
  48. Huang, H., Huang, M., Zhang, W. and Yang, S. (2021a), "Experimental study of predamaged columns strengthened by HPFL and BSP under combined load cases", Struct. Infrastr. Eng., 17(9), 1210-1227. https://doi.org/10.1080/15732479.2020.1801768.
  49. Huang, X., Hao, H., Oslub, K., Habibi, M. and Tounsi, A. (2021b), "Dynamic stability/instability simulation of the rotary sizedependent functionally graded microsystem", Eng. Comput., 1-17. https://doi.org/10.1007/s00366-021-01399-3.
  50. Huang, X., Zhang, Y., Moradi, Z. and Shafiei, N. (2021c), "Computer simulation via a couple of homotopy perturbation methods and the generalized differential quadrature method for nonlinear vibration of functionally graded non-uniform microtube", Eng. Comput., 1-18. https://doi.org/10.1007/s00366-021-01395-7.
  51. Huang, X., Zhu, Y., Vafaei, P., Moradi, Z. and Davoudi, M. (2021d), "An iterative simulation algorithm for large oscillation of the applicable 2D-electrical system on a complex nonlinear substrate", Eng. Comput., 38(4), 3137-3149. https://doi.org/10.1007/s00366-021-01320-y.
  52. Inoue, T., Shiosawa, T. and Takagi, K. (2013), "Dynamic analysis of motion of crawler-type remotely operated vehicles", IEEE J. Ocean. Eng., 38(2), 375-382. https://doi.org/10.1109/JOE.2012.2225292.
  53. Jiao, J., Ghoreishi, S.M., Moradi, Z. and Oslub, K. (2021), "Coupled particle swarm optimization method with genetic algorithm for the static-dynamic performance of the magnetoelectro-elastic nanosystem", Eng. Comput., 38(3), 2499-2513. https://doi.org/10.1007/s00366-021-01391-x.
  54. Kong, F., Dong, F., Duan, M., Habibi, M., Safarpour, H. and Tounsi, A. (2022), "On the vibrations of the Electrorheological sandwich disk with composite face sheets considering pre and post-yield regions", Thin Wall. Struct., 179, 109631. https://doi.org/10.1016/j.tws.2022.109631.
  55. Li, J., Tang, F. and Habibi, M. (2020a), "Bi-directional thermal buckling and resonance frequency characteristics of a GNPreinforced composite nanostructure", Eng. Comput., 1-22. https://doi.org/10.1007/s00366-020-01110-y.
  56. Li, M. and Qian, L. (2015), MATLAB/SIMULINK Dynamics System Modeling and Simulation, National Defense Industry Press, Beijing, China.
  57. Li, Y., Du, L. and Wei, D. (2021), "Multiscale CNN based on component analysis for SAR ATR", IEEE Trans. Geosci. Remote Sens., 60, 1-12. https://doi.org/10.1109/TGRS.2021.3100137.
  58. Li, Y., Jia, G. and Liu, S. (2016), "Mechanical characteristics on long lifting pipeline in deep-ocean mining considering fluidstructure interaction", J. Central South Univ., 47(11), 3670-3676. https://doi.org/10.1002/jbmr.5650110619.
  59. Li, Y., Li, S., Guo, K., Fang, X. and Habibi, M. (2020b), "On the modeling of bending responses of graphene-reinforced higher order annular plate via two-dimensional continuum mechanics approach", Eng. Comput., 1-22. https://doi.org/10.1007/s00366-020-01166-w.
  60. Liu, C., Zhao, Y., Wang, Y., Zhang, T. and Jia, H. (2021a), "Hybrid dynamic modeling and analysis of high-speed thin-rimmed gears", J. Mech. Des., 143(12). https://doi.org/10.1115/1.4051137.
  61. Liu, H., Shen, S., Oslub, K., Habibi, M. and Safarpour, H. (2021b), "Amplitude motion and frequency simulation of a composite viscoelastic microsystem within modified couple stress elasticity", Eng. Comput., 1-15. https://doi.org/10.1007/s00366-021-01316-8.
  62. Liu, H., Shi, Z., Li, J., Liu, C., Meng, X., Du, Y. and Chen, J. (2021c), "Detection of road cavities in urban cities by 3D ground-penetrating radar", Geophys., 86(3), WA25-WA33. https://doi.org/10.1190/geo2020-0384.1.
  63. Liu, H., Zhao, Y., Pishbin, M., Habibi, M., Bashir, M. and Issakhov, A. (2021d), "A comprehensive mathematical simulation of the composite size-dependent rotary 3D microsystem via two-dimensional generalized differential quadrature method", Eng. Comput., 1-16. https://doi.org/10.1007/s00366-021-01419-2.
  64. Liu, Q. and Xiao, L. (2020), "Analysis and research on longitudinal vibration characteristics of deep sea mining pipe based on finite element method", Math. Prob. Eng., 2020, Article ID 8219794. https://doi.org/10.1155/2020/8219794.
  65. Liu, Y., Wang, W., He, T., Moradi, Z. and Larco Benitez, M.A. (2021e), "On the modelling of the vibration behaviors via discrete singular convolution method for a high-order sector annular system", Eng. Comput., 1-23. https://doi.org/10.1007/s00366-021-01454-z.
  66. Liu, Y., Zhang, Z., Liu, X., Wang, L. and Xia, X. (2021f), "Efficient image segmentation based on deep learning for mineral image classification", Adv. Powd. Technol., 32(10), 3885-3903. https://doi.org/10.1016/j.apt.2021.08.038.
  67. Liu, Y., Zhang, Z., Liu, X., Wang, L. and Xia, X. (2021g), "Ore image classification based on small deep learning model: Evaluation and optimization of model depth, model structure and data size", Miner. Eng., 172, 107020. https://doi.org/10.1016/j.mineng.2021.107020.
  68. Liu, Z., Su, S., Xi, D. and Habibi, M. (2020a), "Vibrational responses of a MHC viscoelastic thick annular plate in thermal environment using GDQ method", Mech. Bas. Des. Struct. Mach., 50(8), 2688-2713. https://doi.org/10.1080/15397734.2020.1784201.
  69. Liu, Z., Wu, X., Yu, M. and Habibi, M. (2020b), "Large-amplitude dynamical behavior of multilayer graphene platelets reinforced nanocomposite annular plate under thermo-mechanical loadings", Mech. Bas. Des. Struct. Mach., 1-25. https://doi.org/10.1080/15397734.2020.1815544.
  70. Lori, E.S., Ebrahimi, F., Supeni, E.E.B., Habibi, M. and Safarpour, H. (2020), "The critical voltage of a GPL-reinforced composite microdisk covered with piezoelectric layer", Eng. Comput., 37(4), 3489-3508. https://doi.org/10.1007/s00366-020-01004-z.
  71. Lundquist, C.J. and Granek, E.F. (2005), "Strategies for successful marine conservation: Integrating socioeconomic, political, and scientific factors", Conserv. Biology, 19(6), 1771-1778. https://doi.org/10.1111/j.1523-1739.2005.00279.x.
  72. Luo, J., Song, J., Moradi, Z., Safa, M. and Khadimallah, M.A. (2022a), "Effect of simultaneous compressive and inertia loads on the bifurcation stability of shear deformable functionally graded annular fabrications reinforced with graphenes", Eur. J. Mech.-A/Solid., 94, 104581. https://doi.org/10.1016/j.euromechsol.2022.104581.
  73. Luo, J., Wu, S., Hou, S., Moradi, Z., Habibi, M. and Khadimallah, M.A. (2022b), "Thermally nonlinear thermoelasticity of a onedimensional finite domain based on the finite strain concept", Eur. J. Mech.-A/Solid., 96, 104726. https://doi.org/10.1016/j.euromechsol.2022.104726.
  74. Ma, L., Liu, X. and Moradi, Z. (2022), "On the chaotic behavior of graphene-reinforced annular systems under harmonic excitation", Eng. Comput., 38(3), 2583-2607. https://doi.org/10.1007/s00366-020-01210-9.
  75. McCormick, M.E. (2009), Ocean Engineering Mechanics: with Applications, Cambridge University Press.
  76. Michael, M., Meyyazhagan, A., Velayudhannair, K., Pappuswamy, M., Maria, A., Xavier, V., Balasubramanian, B., Baskaran, R., Kamyab, H. and Vasseghian, Y. (2022), "The content of heavy metals in cigarettes and the impact of their leachates on the aquatic ecosystem", Sustain., 14(8), 4752. https://doi.org/10.3390/su14084752.
  77. Moayedi, H., Aliakbarlou, H., Jebeli, M., Noormohammadiarani, O., Habibi, M., Safarpour, H. and Foong, L. (2020a), "Thermal buckling responses of a graphene reinforced composite micropanel structure", Int. J. Appl. Mech., 12(01), 2050010. https://doi.org/10.1142/S1758825120500106.
  78. Moayedi, H., Ebrahimi, F., Habibi, M., Safarpour, H. and Foong, L.K. (2020b), "Application of nonlocal strain-stress gradient theory and GDQEM for thermo-vibration responses of a laminated composite nanoshell", Eng. Comput., 37(4), 3359-3374. https://doi.org/10.1007/s00366-020-01002-1.
  79. Moayedi, H., Habibi, M., Safarpour, H., Safarpour, M. and Foong, L. (2019), "Buckling and frequency responses of a graphene nanoplatelet reinforced composite microdisk", Int. J. Appl. Mech., 11(10), 1950102. https://doi.org/10.1142/S1758825119501023.
  80. Mohammadgholiha, M., Shokrgozar, A., Habibi, M. and Safarpour, H. (2019), "Buckling and frequency analysis of the nonlocal strain-stress gradient shell reinforced with graphene nanoplatelets", J. Vib. Control, 25(19-20), 2627-2640. https://doi.org/10.1177/1077546319863251.
  81. Mohammadi, A., Lashini, H., Habibi, M. and Safarpour, H. (2019), "Influence of viscoelastic foundation on dynamic behaviour of the double walled cylindrical inhomogeneous micro shell using MCST and with the aid of GDQM", J. Solid Mech., 11(2), 440-453. 10.22034/JSM.2019.665264.
  82. Moradi, Z., Davoudi, M., Ebrahimi, F. and Ehyaei, A.F. (2021), "Intelligent wave dispersion control of an inhomogeneous micro-shell using a proportional-derivative smart controller", Wave. Random Complex Media, 1-24. https://doi.org/10.1080/17455030.2021.1926572.
  83. Najaafi, N., Jamali, M., Habibi, M., Sadeghi, S., Jung, D.W. and Nabipour, N. (2020), "Dynamic instability responses of the substructure living biological cells in the cytoplasm environment using stress-strain size-dependent theory", J. Biomolec. Struct. Dyn., 39(7), 2543-2554. https://doi.org/10.1080/07391102.2020.1751297.
  84. Oyarhossein, M.A., Alizadeh, A.a., Habibi, M., Makkiabadi, M., Daman, M., Safarpour, H. and Jung, D.W. (2020), "Dynamic response of the nonlocal strain-stress gradient in laminated polymer composites microtubes", Scientif. Report., 10(1), 1-19. https://doi.org/10.1038/s41598-020-61855-w.
  85. Peng, Y., Zhang, L., Li, Z., Zhong, S., Liu, Y., Xie, S. and Luo, J. (2022), "Influences of wire diameters on output power in electromagnetic energy harvester", Int. J. Prec. Eng. Manuf.-Green Technol., 1-12. https://doi.org/10.1007/s40684-022-00446-8.
  86. Pourjabari, A., Hajilak, Z.E., Mohammadi, A., Habibi, M. and Safarpour, H. (2019), "Effect of porosity on free and forced vibration characteristics of the GPL reinforcement composite nanostructures", Comput. Math. Appl., 77(10), 2608-2626. https://doi.org/10.1016/j.camwa.2018.12.041.
  87. Riveros, C.A., Utsunomiya, T., Maeda, K. and Itoh, K. (2010), "Response prediction of long flexible risers subject to forced harmonic vibration", J. Marine Sci. Technol., 15(1), 44-53. https://doi.org/10.1007/s00773-009-0070-5.
  88. Safarpour, H., Ghanizadeh, S.A. and Habibi, M. (2018), "Wave propagation characteristics of a cylindrical laminated composite nanoshell in thermal environment based on the nonlocal strain gradient theory", Eur. Phys. J. Plus, 133(12), 532. https://doi.org/10.1140/epjp/i2018-12385-2.
  89. Safarpour, H., Hajilak, Z.E. and Habibi, M. (2019a), "A sizedependent exact theory for thermal buckling, free and forced vibration analysis of temperature dependent FG multilayer GPLRC composite nanostructures restring on elastic foundation", Int. J. Mech. Mater. Des., 15(3), 569-583. https://doi.org/10.1007/s10999-018-9431-8.
  90. Safarpour, H., Pourghader, J. and Habibi, M. (2019b), "Influence of spring-mass systems on frequency behavior and critical voltage of a high-speed rotating cantilever cylindrical threedimensional shell coupled with piezoelectric actuator", J. Vib. Control, 25(9), 1543-1557. https://doi.org/10.1177/1077546319828465.
  91. Safarpour, M., Ebrahimi, F., Habibi, M. and Safarpour, H. (2020), "On the nonlinear dynamics of a multi-scale hybrid nanocomposite disk", Eng. Comput., 37(3), 2369-2388. https://doi.org/10.1007/s00366-020-00949-5.
  92. Shao, Y., Zhao, Y., Gao, J. and Habibi, M. (2021), "Energy absorption of the strengthened viscoelastic multi-curved composite panel under friction force", Arch. Civil Mech. Eng., 21(4), 1-29. https://doi.org/10.1007/s43452-021-00279-3.
  93. Shariati, A., Habibi, M., Tounsi, A., Safarpour, H. and Safa, M. (2020a), "Application of exact continuum size-dependent theory for stability and frequency analysis of a curved cantilevered microtubule by considering viscoelastic properties", Eng. Comput., 37(4), 3629-3648. https://doi.org/10.1007/s00366-020-01024-9.
  94. Shariati, A., Mohammad-Sedighi, H., Zur, K.K., Habibi, M. and Safa, M. (2020b), "On the vibrations and stability of moving viscoelastic axially functionally graded nanobeams", Mater., 13(7), 1707. https://doi.org/10.3390/ma13071707.
  95. Shariati, A., Mohammad-Sedighi, H., Zur, K.K., Habibi, M. and Safa, M. (2020c), "Stability and dynamics of viscoelastic moving rayleigh beams with an asymmetrical distribution of material parameters", Symmetry, 12(4), 586. https://doi.org/10.3390/sym12040586.
  96. Shariati, M., Azar, S.M., Arjomand, M.-A., Tehrani, H.S., Daei, M. and Safa, M. (2020d), "Evaluating the impacts of using piles and geosynthetics in reducing the settlement of fine-grained soils under static load", Geomech. Eng., 20(2), 87-101. https://doi.org/10.12989/gae.2020.20.2.087.
  97. Shariati, M., Davoodnabi, S.M., Toghroli, A., Kong, Z. and Shariati, A. (2021a), "Hybridization of metaheuristic algorithms with adaptive neuro-fuzzy inference system to predict load-slip behavior of angle shear connectors at elevated temperatures", Compos. Struct., 278, 114524. https://doi.org/10.1016/j.compstruct.2021.114524.
  98. Shariati, M., Faegh, S.S., Mehrabi, P., Bahavarnia, S., Zandi, Y., Masoom, D.R., Toghroli, A., Trung, N.-T. and Salih, M.N. (2019), "Numerical study on the structural performance of corrugated low yield point steel plate shear walls with circular openings", Steel Compos. Struct., 33(4), 569-581. https://doi.org/10.12989/scs.2019.33.4.569.
  99. Shariati, M., Ghorbani, M., Naghipour, M., Alinejad, N. and Toghroli, A. (2020e), "The effect of RBS connection on energy absorption in tall buildings with braced tube frame system", Steel Compos. Struct., 34(3), 393-407. https://doi.org/10.12989/scs.2020.34.3.393.
  100. Shariati, M., Lagzian, M., Maleki, S., Shariati, A. and Trung, N.T. (2020f), "Evaluation of seismic performance factors for tensiononly braced frames", Steel Compos. Struct., 35(4), 599-609. https://doi.org/10.12989/scs.2020.35.4.599.
  101. Shariati, M., Mafipour, M.S., Ghahremani, B., Azarhomayun, F., Ahmadi, M., Trung, N.T. and Shariati, A. (2020g), "A novel hybrid extreme learning machine-grey wolf optimizer (ELMGWO) model to predict compressive strength of concrete with partial replacements for cement", Eng. Comput., 1-23. https://doi.org/10.1007/s00366-020-01081-0.
  102. Shariati, M., Mafipour, M.S., Mehrabi, P., Ahmadi, M., Wakil, K., Trung, N.T. and Toghroli, A. (2020h), "Prediction of concrete strength in presence of furnace slag and fly ash using Hybrid ANN-GA (Artificial Neural Network-Genetic Algorithm)", Smart Struct. Syst., 25(2), 183-195. https://doi.org/10.12989/sss.2020.25.2.183.
  103. Shariati, M., Naghipour, M., Yousofizinsaz, G., Toghroli, A. and Tabarestani, N.P. (2020i), "Numerical study on the axial compressive behavior of built-up CFT columns considering different welding lines", Steel Compos. Struct. 34(3), 377-391. http://doi.org/10.12989/scs.2020.34.3.377.
  104. Shariati, M., Shariati, A., Trung, N.T., Shoaei, P., Ameri, F., Bahrami, N. and Zamanabadi, S.N. (2021b), "Alkali-activated slag (AAS) paste: Correlation between durability and microstructural characteristics", Constr. Build. Mater., 267, 120886. https://doi.org/10.1016/j.conbuildmat.2020.120886.
  105. Shariati, M., Sulong, N.R. and Khanouki, M.A. (2012), "Experimental assessment of channel shear connectors under monotonic and fully reversed cyclic loading in high strength concrete", Mater. Des., 34, 325-331. https://doi.org/10.1016/j.matdes.2011.08.008.
  106. Shariati, M., Sulong, N.R., Shariati, A. and Khanouki, M.A. (2016a), "Behavior of V-shaped angle shear connectors: Experimental and parametric study", Mater. Struct., 49(9), 3909-3926. https://doi.org/10.1617/s11527-015-0762-8.
  107. Shariati, M., Sulong, N.R., Shariati, A. and Kueh, A. (2016b), "Comparative performance of channel and angle shear connectors in high strength concrete composites: An experimental study", Constr. Build. Mater., 120, 382-392. https://doi.org/10.1016/j.conbuildmat.2016.05.102.
  108. Shariati, M., Tahmasbi, F., Mehrabi, P., Bahadori, A. and Toghroli, A. (2020j), "Monotonic behavior of C and L shaped angle shear connectors within steel-concrete composite beams: An experimental investigation", Steel Compos Struct. 35(2), 237-247. http://doi.org/10.12989/scs.2020.35.2.237.
  109. Shen, F., Zhang, D., Zhang, Q., Li, Z., Guo, H., Gong, Y. and Peng, Y. (2022), "Influence of temperature difference on performance of solid-liquid triboelectric nanogenerators", Nano Energy, 107431. https://doi.org/10.1016/j.nanoen.2022.107431.
  110. Shokrgozar, A., Safarpour, H. and Habibi, M. (2020), "Influence of system parameters on buckling and frequency analysis of a spinning cantilever cylindrical 3D shell coupled with piezoelectric actuator", Proc. Inst. Mech. Eng., Part C: J. Mech. Eng. Sci., 234(2), 512-529. https://doi.org/10.1177/0954406219883312.
  111. Szelangiewicz, T., Zelazny, K. and Buczkowski, R. (2017), "Computer simulations of deformations and tensions in the pipelines of hydraulic lifting systems", Zeszyty Naukowe Akademii Morskiej w Szczecinie. https://doi.org/10.17402/243.
  112. Tao, C., Li, H., Jin, X., Zhou, J., Wu, T., He, Y., Deng, X., Gu, C., Zhang, G. and Liu, W. (2014), "Seafloor hydrothermal activity and polymetallic sulfide exploration on the southwest Indian ridge", Chin. Sci. Bull., 59(19), 2266-2276. https://doi.org/10.1007/s11434-014-0182-0.
  113. Wang, G. (2009), "Research on spatial configuration and dynamic characteristics of hoisting pipeline system in deep-sea mining operations", Central South University, Beijing, China.
  114. Wang, H., Habibi, M., Marzouki, R., Majdi, A., Shariati, M., Denic, N., Zakic, A., Khorami, M., Khadimallah, M.A. and Ebid, A.A.K. (2022a), "Improving the self-healing of cementitious materials with a hydrogel system", Gel., 8(5), 278. https://doi.org/10.3390/gels8050278.
  115. Wang, J., Tian, J., Zhang, X., Yang, B., Liu, S., Yin, L. and Zheng, W. (2022b), "Control of time delay force feedback teleoperation system with finite time convergence", Front. Neurorobot., 16, . https://doi.org/10.3389/fnbot.2022.877069.
  116. Wang, P., Gao, Z., Pan, F., Moradi, Z., Mahmoudi, T. and Khadimallah, M.A. (2022c), "A couple of GDQM and iteration techniques for the linear and nonlinear buckling of bidirectional functionally graded nanotubes based on the nonlocal strain gradient theory and high-order beam theory", Eng. Anal. Bound Elem., 143, 124-136. https://doi.org/10.1016/j.enganabound.2022.06.007.
  117. Wang, X. and Lyu, X. (2021), "Experimental study on vertical water entry of twin spheres side-by-side", Ocean Eng., 221, 108508. https://doi.org/10.1016/j.oceaneng.2020.108508.
  118. Wang, X., Zhang, Y., Luo, M., Xiao, K., Wang, Q., Tian, Y., Qiu, W., Xiong, Y., Zheng, C. and Li, H. (2021a), "Radium and nitrogen isotopes tracing fluxes and sources of submarine groundwater discharge driven nitrate in an urbanized coastal area", Sci. Total Environ., 763, 144616. https://doi.org/10.1016/j.scitotenv.2020.144616.
  119. Wang, Y., Wang, H., Zhou, B. and Fu, H. (2021b), "Multidimensional prediction method based on Bi-LSTMC for ship roll", Ocean Eng., 242, 110106. https://doi.org/10.1016/j.oceaneng.2021.110106.
  120. Wang, Y., Yang, J., Moradi, Z., Safa, M. and Khadimallah, M.A. (2022d), "Nonlinear dynamic analysis of thermally deformed beams subjected to uniform loading resting on nonlinear viscoelastic foundation", Eur. J. Mech.-A/Solid., 95, 104638. https://doi.org/10.1016/j.euromechsol.2022.104638.
  121. Wang, Z., Ramamoorthy, R., Xi, X. and Namazi, H. (2022e), "Synchronization of the neurons coupled with sequential developing electrical and chemical synapses", Math. Biosci. Eng., 19(2), 1877-1890. https://doi.org/10.3934/mbe.2022088.
  122. Wang, Z., Ramamoorthy, R., Xi, X., Rajagopal, K., Zhang, P. and Jafari, S. (2022f), "The effects of extreme multistability on the collective dynamics of coupled memristive neurons", Eur. Phys. J. Spec. Topic., 1-8. https://doi.org/10.1140/epjs/s11734-022-00558-x.
  123. Wang, Z., Yu, S., Xiao, Z. and Habibi, M. (2020), "Frequency and buckling responses of a high-speed rotating fiber metal laminated cantilevered microdisk", Mech. Adv. Mater. Struct., 29(10), 1475-1488. https://doi.org/10.1080/15376494.2020.1824284.
  124. Wu, J. and Habibi, M. (2021), "Dynamic simulation of the ultrafast-rotating sandwich cantilever disk via finite element and semi-numerical methods", Eng. Comput., 1-17. https://doi.org/10.1007/s00366-021-01396-6.
  125. Wu, Q., Yang, J., Lu, H., Lu, W. and Liu, L. (2020), "Effects of heave motion on the dynamic performance of vertical transport system for deep sea mining", Appl. Ocean Res., 101, 102188. https://doi.org/10.1016/j.apor.2020.102188.
  126. Xia, W., Du, J., Habibi, M., Shariati, M. and Khadimallah, M.A. (2022), "Application of Chebyshev-based GDQ and Newmark methods to viscothermoelasticity responses of FG composite annular systems", Eng. Anal. Bound Elem., 143, 28-42. https://doi.org/10.1016/j.enganabound.2022.06.003.
  127. Xiao, L.J., Liu, Q. and Lu, J.M. (2020), "Analysis on longitudinal vibration law of deep sea stepped mining pipe", AIP Adv., 10(12), 125302. https://doi.org/10.1063/5.0032731.
  128. Xin, C., Li, Z., Zhang, Q., Peng, Y., Guo, H. and Xie, S. (2022), "Investigating the output performance of Triboelectric Nanogenerators with Single/Double-sided interlayer", Nano Energy, 107448. https://doi.org/10.1016/j.nanoen.2022.107448.
  129. Xiong, Q.M., Chen, Z., Huang, J.T., Zhang, M., Song, H., Hou, X.F., Li, X.B. and Feng, Z.J. (2020), "Preparation, structure and mechanical properties of Sialon ceramics by transition metalcatalyzed nitriding reaction", Rare Metal., 39(5), 589-596. https://doi.org/10.1007/s12598-020-01385-6.
  130. Xu, W., Pan, G., Moradi, Z. and Shafiei, N. (2021), "Nonlinear forced vibration analysis of functionally graded non-uniform cylindrical microbeams applying the semi-analytical solution", Compos. Struct., 275, 114395. https://doi.org/10.1016/j.compstruct.2021.114395.
  131. Yang, N., Moradi, Z., Arvin, H., Muhsen, S. and Khadimallah, M.A. (2022a), "A study on small scale thermal dynamic instability of rotating GPL-reinforced microbeams under principal parametric resonance stimulation of axial and transversal modes regarding the proportional damping", Thin Wall. Struct., 180, 109806. https://doi.org/10.1016/j.tws.2022.109806.
  132. Yang, N., Moradi, Z., Khadimallah, M.A. and Arvin, H. (2022b), "Application of the Chebyshev-Ritz route in determination of the dynamic instability region boundary for rotating nanocomposite beams reinforced with graphene platelet subjected to a temperature increment", Eng. Anal. Bound Elem., 139, 169-179. https://doi.org/10.1016/j.enganabound.2022.03.013.
  133. Yoon, C.H., Park, Y.C., Lee, D.K., Kwon, K.S., Kwon, S.K. and Sung, W.M. (2003). "Behavior of deep sea mining pipe and its effect on internal flow", Fifth ISOPE Ocean Mining Symposium.
  134. Yu, X., Maalla, A. and Moradi, Z. (2022), "Electroelastic highorder computational continuum strategy for critical voltage and frequency of piezoelectric NEMS via modified multi-physical couple stress theory", Mech. Syst. Signal Pr., 165, 108373. https://doi.org/10.1016/j.ymssp.2021.108373.
  135. Zare, R., Najaafi, N., Habibi, M., Ebrahimi, F. and Safarpour, H. (2020), "Influence of imperfection on the smart control frequency characteristics of a cylindrical sensor-actuator GPLRC cylindrical shell using a proportional-derivative smart controller", Smart Struct. Syst., 26(4), 469-480. https://doi.org/10.12989/sss.2020.26.4.469.
  136. Zhang, C., Mousavi, A.A., Masri, S.F., Gholipour, G., Yan, K. and Li, X. (2022a), "Vibration feature extraction using signal processing techniques for structural health monitoring: A review", Mech. Syst. Signal Pr., 177, 109175. https://doi.org/10.1016/j.ymssp.2022.109175.
  137. Zhang, L., Huang, M., Li, M., Lu, S., Yuan, X. and Li, J. (2022b), "Experimental study on evolution of fracture network and permeability characteristics of bituminous coal under repeated mining effect", Nat. Resour. Res., 31(1), 463-486. https://doi.org/10.1007/s11053-021-09971-w.
  138. Zhang, L., Huang, M., Xue, J., Li, M. and Li, J. (2021a), "Repetitive mining stress and pore pressure effects on permeability and pore pressure sensitivity of bituminous coal", Nat. Resour. Res., 30(6), 4457-4476. https://doi.org/10.1007/s11053-021-09902-9.
  139. Zhang, L., Li, J., Xue, J., Zhang, C. and Fang, X. (2021b), "Experimental studies on the changing characteristics of the gas flow capacity on bituminous coal in CO2-ECBM and N2-ECBM", Fuel., 291, 120115. https://doi.org/10.1016/j.fuel.2020.120115.
  140. Zhang, Y., Wang, Z., Tazeddinova, D., Ebrahimi, F., Habibi, M. and Safarpour, H. (2021c), "Enhancing active vibration control performances in a smart rotary sandwich thick nanostructure conveying viscous fluid flow by a PD controller", Wave. Random Complex Media, 1-24. https://doi.org/10.1080/17455030.2021.1948627.
  141. Zhang, Z., Luo, C. and Zhao, Z. (2020), "Application of probabilistic method in maximum tsunami height prediction considering stochastic seabed topography", Nat. Hazard., 104(3), 2511-2530. https://doi.org/10.1007/s11069-020-04283-3.
  142. Zhao, Y., Moradi, Z., Davoudi, M. and Zhuang, J. (2022), "Bending and stress responses of the hybrid axisymmetric system via state-space method and 3D-elasticity theory", Eng. Comput., 38(2), 939-961. https://doi.org/10.1007/s00366-020-01242-1.
  143. Zheng, Y., Jin, H., Jiang, C., Moradi, Z., Khadimallah, M.A. and Moayedi, H. (2022), "Analyzing behavior of circular concretefilled steel tube column using improved fuzzy models", Steel Compos. Struct., 43(5), 625-637. https://doi.org/10.12989/scs.2022.43.5.625.
  144. Zhou, C., Zhao, Y., Zhang, J., Fang, Y. and Habibi, M. (2020), "Vibrational characteristics of multi-phase nanocomposite reinforced circular/annular system", Adv. Nano Res., 9(4), 295-307. https://doi.org/10.12989/anr.2020.9.4.295.
  145. Zhou, Z.J., Yang, N. and Wang, Z. (2013), "Analysis on shock wave speed of water hammer of lifting pipes for deep-sea mining", China Ocean Eng., 27(2), 205-214. https://doi.org/10.1007/s13344-013-0018-8.
  146. Zhu, L., Ren, H., Habibi, M., Mohammed, K.J. and Khadimallah, M.A. (2022), "Predicting the environmental economic dispatch problem for reducing waste nonrenewable materials via an innovative constraint multi-objective Chimp Optimization Algorithm", J. Clean. Prod., 132697. https://doi.org/10.1016/j.jclepro.2022.132697.
  147. Zienkiewicz, O.C., Taylor, R.L., Nithiarasu, P. and Zhu, J. (1977), The Finite Element Method, McGraw-hill London.